• 자원리싸이클링
• /
• 제7권4호
• /
• pp.35-42
• /
• 1998

오늘날 전자부품 산업에 실장기술은 크게 각광을 받고 있다. 페라이트 칩인덕터와 같이 전자부품의 소형화를 위해서는, 쉬트 적층법이나 스크린 인쇄법 등을 위하여 유기용매를 사용하는 세라믹 습식공정이 널리 사용되고 있다. 본연구에서는 물이 혼합된 용매계를 이용한 NiCuZn Ferrite(NCZF) 슬러리와 그린쉬트의 제조 및 평가에 관한 연구를 하였다. 볼밀링에 의하여 21 vol%의 NCZF 슬러리를 제조하였으며, polacrylic vinyl copolymer를 바인더로서 사용하였다. 용매로서는 isopropyl alcohol과 2-butoxy ethanol에 40∼80% 물을 혼합하여 사용하였다. 그 결과, NCZF 슬러리의 분산안정성은 입자의 정전기적 힘보다는 free polymer에 의해 나타났으며, 슬러리의 점성은 용매중의 물함량에 크게 의존하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.98-99
• /
• 2007

This study has successfully demonstrated the direct fabrication of polymer resistors using ink-jet printing technology as an alternative patterning to traditional photolithography. The polymer resistors were fabricated just by two layer processes using a ink-jet printer (DMP-2800, Fujifilm Dimatix). First, resistive materials was patterned by a ink-jet printing with the desired width and length. Next, resistor fabrication was completed by printing metal contact pads on the both sides of the polymer resistor. We used poly (3,4-ethylene dioxythiophene) poly(styrenesulfonate)(PEDOT:PSS) for the resistor material and a nano-sized silver colloid for the metal contact pads. We characterized the electrical properties of PEDOT:PSS by measuring sheet resistance and specific resistance on a glass substrate. From analysis of the measured resistances, the electrical resistances of the polymer resistors linearly increased as a function of printed width and length of resistors. The accuracy of the fabricated polymer resistor showed about $0.6{\sim}2.5%$ error for the same dimensions.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.94.2-94
• /
• 2003

• 콘크리트학회논문집
• /
• 제24권5호
• /
• pp.585-596
• /
• 2012

이 연구는 교량이나 주차장 건물 등에 적용이 가능한 GFRP 보강 철근 폴리머 콘크리트 T형 보의 휨 특성에 관한 연구로서 GFRP 보강 수준에 따른 압축파괴(compression failure: CF), 인장파괴(tension failure: TF) 및 GFRP 보강재의 파괴(fiber sheet failure: FF) 등 파괴모드의 판단과 결정방법을 제시하고, 파괴모드별 설계휨강도 산정식을 제시하였다. GFRP 보강 철근콘크리트 보에서는 FF, TF, CF 등 3가지 파괴모드 중에서 철근항복 ${\rightarrow}$ GFRP 파단 ${\rightarrow}$ 압축측 콘크리트 파괴의 순으로 진행되는 FF 파괴모드가 가장 이상적이다. FF 파괴모드의 경우 압축측 폴리머 콘크리트가 극한변형률(${\varepsilon}_{cu}$)에 도달하기 전에 GFRP가 먼저 파단되므로 콘크리트의 극한상태를 기반으로 하는 기존의 등가직사각형 응력블럭의 개념을 적용할 수 없다. 따라서 이 연구에서는 폴리머 콘크리트의 특성에 부합되는 이상화된 폴리머 콘크리트의 압축응력-변형률 곡선을 제안하고, 폴리머 콘크리트의 변형률을 기반으로 하여 응력블럭 매개변수 ${\alpha}$, ${\beta}$를 도출하였다. 또한 T형 보의 형상비에 따른의 압축응력 분포 및 설계휨강도 특성을 규명하고 적정한 형상비를 2.5로 제시하였으며, GFRP 보강재의 두께 및 높이에 따른 설계휨강도 산정식을 제시하고 그 식의 적정성을 실험과 이론해석에 의해 입증하였다.

• 한국융합학회논문지
• /
• 제11권6호
• /
• pp.83-88
• /
• 2020

최근 의료기관에서 친환경 재료로 제작된 방사선 차폐시트를 많이 사용하고 있다. 차폐시트는 폴리머 소재에 차폐물질을 혼입하여 열성형으로 고형적인 형태로 가공된다. 베이스는 수지 계열로 인장강도에는 한계가 있으며, 이를 위해 표면에 부직포 등의 섬유를 합포하여 사용하고 있다. 차폐시트 공정 기술은 차폐성능을 높이고자 차폐물질의 함유량을 높이면 인장강도가 급격히 떨어지는 문제점을 제시하고 있다. 이를 개선하고자 본 연구에서는 차폐시트에 섬유를 Binding하는 방식과 부직포에 소량의 차폐물질인 텅스텐을 함유하여 적층구조로 Laminating방식을 기본 폴리머 형태로 Compression molding방식 세 가지 종류의 차폐시트를 제조하여 동일한 차폐 물질량을 기준으로 차폐성능과 인장 강도를 비교 평가하였다. 세 종류 차폐시트의 비교에서 섬유 코팅 시트와 압착 방식의 시트는 차폐성능 차이는 5%정도이며, 인장강도는 65MPa에서 280MPa로 큰 차이가 나타났다. 적층구조의 차폐시트는 차폐 성능도 차이가 있었으며, 인장강도도 기준의 4배로 증가하였다.

• 한국염색가공학회지
• /
• 제34권3호
• /
• pp.157-164
• /
• 2022

This study tried to analyze the heat resistance properties by blending epoxy and phenolic resin in a certain ratio, and to analyze the adhesive properties at the time of metal-polymer hetero-adhesion by applying Epoxy-phenolic resin between a silicon steel sheet and m-aramid sheet, the viscosity, adhesive peel strength, and adhesive cross section were measured using a rotational rheometer, a tensile tester(UTM), and a field emission scanning electron microscopy(FE-SEM). The thermal stability and heat resistance were confirmed by measuring the mass loss according to the temperature increase using Thermogravimetric analysis(TGA). After blending with epoxy and Phenolic resin(1:0.25 ratio) curing at 110℃ for 10 min, high adhesive strength was improved more than 40% compared to the adhesive strength using epoxy alone. When the space between the silicon steel sheet and m-aramid sheet, which is created during curing of the E-P blend, is cured with a slight weight, it is possible to control the empty space and improve adhesion.

• 한국생산제조학회지
• /
• 제26권3호
• /
• pp.344-349
• /
• 2017

In this study, we developed a process technology to fabricate RFID tag antennas using a one-sheet inlay micro-pattern forming process by press-molding RFID tag antennas on insulation sheet layers, such as polymer films, using ultrasonic longitudinal vibration. In addition, a fine pattern applicable for RFID tag antennas was manufactured using a $25{\mu}m$ thick thin-plate square wire; this is in contrast to the method that uses a conventional round wire. The developed ultrasonic indentation process can be used to fabricate fine pattern of the RFID antenna using one piece of equipment. The simplified manufacturing process technology has a shorter manufacturing time and is more economical. The developed RFID tag antenna forming technique involves pressing the $25{\mu}m$ square wire directly on the thin sheet insulation sheet of maximum thickness $200{\mu}m$, using a 60 kHz ultrasonic tool horn.

• Advances in environmental research
• /
• 제3권4호
• /
• pp.367-377
• /
• 2014

In this study, we investigated a life cycle assessment (LCA) of six roof-waterproofing systems [asphalt (C1), synthetic polymer-based sheet (C2), improved asphalt (C3), liquid applied membrane (C4), Metal sheet with asphalt sheet (N1), and liquid applied membrane with asphalt sheet (N2)]for reinforced concrete building using an architectural model. To acquire accurate and realistic LCA results, minimum units of material compositions for life cycle inventory and real data for compositions of waterproofing materials were used. Considering only materials and energy demands for waterproofing systems per square meter, higher greenhouse gas (GHG) emissions could be generated in the order of C1 > N2 > C4 > N1 > C2 > C3 during construction phase. However, the order was changed to C1 > C4 > C3 > N2 > N1 > C2, when the actual architecture model was applied to the roof based on each specifications. When an entire life cycle including construction, maintenance, and deconstruction were considered, the amount of GHG emission was in the order of C4 > C1 > C3 > N2 > C2 > N1. Consequently, N1 was the most environmental-friendly waterproofing system producing the lowest GHG emission. GHG emissions from maintenance phase accounted for 71.4%~78.3% among whole life cycle.

• 펄프종이기술
• /
• 제30권1호
• /
• pp.59-70
• /
• 1998

A steady-state molecular diffusion experiment was conducted to evaluate the water vapor proof properties of paper Handsheets prepared from unbleached Itraft pulps(UKP) and old newspapers(ONP) and four different types of polymer-laminated white duplex board were tested under appropriate standard conditions. The diffusivity was determined on the basis of the Fickean first law. Results obtained from this study can be summarized as follows ; 1. The diffusivity data for handsheets showed about $10^{-5}cm^2/min$. whereas polymer-laminated paperboards had remarkably improved water-vapor resistance with about $10^3 to 10^4$ times lower diffusivity : 2. Sheet basis weight, wet-swelling and sizing degree had little influence on the diffusivity of paper; 3 Linear relationship existed between sheet density and diffusivity, and, 4. Highly sfgnificant linear relationship could be observed between diffusivity and Darcy s gas permeability. Results indicate that diffusivity, an intrinsic property of paper, can provide a valuable information for precise evaluation and improved quality control of water-vapor proof properties of paper.

• 한국환경과학회지
• /
• 제14권1호
• /
• pp.97-103
• /
• 2005

Because of the toxicity of hexavelant chromium ion, treatments of metallic surface with chromate compounds to retard corrosion are undesirable for safety control in industrial uses and protection of environment. In this study, we investigated several compounds such as inorganic, organic, and polymer materials in order to sub­stitute the chromate conversion treatment on steel sheet. The corrosion property was investigated in a salt spray tester with 3.5 $wt.{\%}\;NaCI\;at\;35^{\circ}C.$ The results showed that the zirconium/silane/polymer triple coatings on the galvanized steel exhibited a significant retardation of corrosion. Although the multicoating system needs a com­plexed processing, we can confirm a possibility of development of a chromate-free chemical conversion treat­ment for galvanized steel sheet.