• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.258-258
• /
• 2006

Electrospun fibers of poly(vinyl alcohol) (PVA) were successfully prepared and applied as drug carriers for transdermal drug delivery system. Sodium Salicylate (SS) was the model drug and it was incorporated in the PVA fibers by adding 20 % of SS in a PVA solution prior to electrospinning. Electrospinning of SS-containing PVA solution resulted in the formation of beaded fibers. In order to control the rate of SS release and decrease water solubility of PVA, the SS-loaded electrospun PVA mat was cross-linked by either glutaraldehyde or glyoxal vapor. The morphology, thermal behavior, swelling behavior, release characteristic, kinetics of drug release and also toxicity of the cross-linked sample were investigated.

• Food Science and Biotechnology
• /
• v.16 no.6
• /
• pp.954-957
• /
• 2007

Gelation mechanism of xanthan-carob mixture (X/C) was investigated based on thermorheological behavior. Three X/C ratios (1:3, 1:1, and 3:1) were studied. Small amplitude oscillatory shear tests were performed to measure linear viscoelastic behavior during gelation. Temperature sweep ($-1^{\circ}C/min$) experiments were conducted. Using a non-isothermal kinetic model, activation energy (Ea) during gelation was calculated. At 1% total concentration, the Ea for xanthan fraction (${\phi}_x$)=0.25, 0.5, and 0.75 were 178, 159, and 123 kJ/mol, respectively. However, a discontinuity was observed in the activation energy plots. Based on this, two gelation mechanisms were presumed-association of xanthan and carob molecules and aggregation of polymer strands. The association process is the primary mechanism to form 3-D networks in the initial stage of gelation and the aggregation of polymer strands played a major role in the later stage.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.10a
• /
• pp.171-177
• /
• 1995

Fracture mechanics does work for concrete, provided that one uses a proper, nonlinear form of fracture mechanics in which a finite nonlinear zone at fracture front is being considered. The fracture process zone is a region ahead of a traction-free crack, and the development of model of fracture process zone is most important to describe fracture phenomena in concrete. This paper is about fracture behavior of concrete cylinder under lateral pressure. Concrete cylinders were made of high strength normal connote, steel fiber reinforced concrete and steel fiber reinforced polymer-impregnated concrete and concrete and the fracture behavior such as cracking propagation and ultimate load are observed. The fracture process zone is modelled by a Dugdale-Barenblatt type model with linear tension-softening curve and are implemented to the boundary element technique for the fracture analyses of the cylinders. The experimental results are compared with analysis results and tension-softening curves for the steel fiber reinforced concrete and steel fiber reinforced polymer-impregnated concrete are obtained by back analyses.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.91-99
• /
• 2017

The purpose of this paper is to evaluate the flexural performance of reinforced concrete (RC) beams repaired with polymer mortar. The repaired and non-repaired 13th beams which was fabricated by considering repair position, repair depth, and curing age of polymer mortar as test variables were tested under three point loading. All specimens repaired in compressive and tensile zone did not fail due to interfacial failure between polymer mortar and concrete but failed when the strain of repaired mortar exceeded the ultimate tensile strain of polymer mortar. Maximum load of specimens repaired in compressive zone was similar to that of non-repaired specimen, reference specimen. Additionally, their ductility index was higher than that of reference specimen. On the other hand, specimens repaired in tensile zone failed very brittlely and have a lower ductility index than reference specimen. Nonlinear analysis by using OpenSees was performed to predict the behavior of RC beam repaired with polymer mortar. Two dimension frame element was used to simplify an analysis model and fiber model was applied to consider the material non-linearity. It was confirmed from the analysis results that nonlinear analysis properly predicts the behavior of specimens repaired in compressive zone and overestimates the behavior of specimens repaired in tensile zone.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.682-689
• /
• 2000

The information related to the interaction energy between repeat units is essential for the production of useful polymer blends via molecular structure design. Based on the interaction energies obtained here, a method for the fabrication of miscible blend was suggested. An investigation related to the equilibrium phase behavior of polymer blends of various polycarbonates with various polymethacrylates was performed and then based on the obtained interaction information miscible polymer blends were produced by controling molecular structure of polymer. Binary interaction energies between repeat units were calculated from the lower critical solution temperature-type phase boundary using an equation of state combined with binary interaction model.

• Geomechanics and Engineering
• /
• v.10 no.1
• /
• pp.95-107
• /
• 2016

Deep soil mixing with cement and cement-lime mixtures has been widely used for decades to improve the strength of soils. In this study, small-scale laboratory model tests of polymer columns in soft clayey soil were conducted to evaluate the feasibility of using various polymeric compounds as binders in deep soil mixing. Floating and end bearing polymer columns were used to examine the load-settlement relationship of improved soft clayey soils for various area replacement ratios. The results indicate that polymer columns show good promise for use in deep mixing applications.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.6
• /
• pp.72-76
• /
• 2003

This paper deals with the stress singularity developed in a polymer layer that is coated to a concrete surface, due to temperature change. The boundary element method is employed to investigate the behavior of interface stresses. The polymeric layer is assumed to be a linear viscoelastic material, and is thermorheologically simple. The order of the singularity is obtained, numerically, for a given viscoelastic model. Numerical results exhibit the relaxation of interface stresses, and large gradients are observed in the vicinity of the free surface. Results show that the stress singularity factor is relaxed with time, while the order of the singularity increases with time for the viscoelastic model.

• Tribology and Lubricants
• /
• v.11 no.4
• /
• pp.53-57
• /
• 1995

The contact pressure behavior is examined by means of a finite element analysis. The oil film between the piston ring and cylinder liner is analyzed on the basis that it behaves like a polymer material. The calculated results indicate that a shape of sloping edge with a straight line, which is designated as a Model III, shows a good performance on the contact pressure behavior for the increased speed. Obviously, the ring face profiles play an important role on the contact pressure between compression ring and oil film.

• Macromolecular Research
• /
• v.11 no.4
• /
• pp.283-290
• /
• 2003

Organic drugs including aspirin, omeprazole, and naproxen with three different levels of octanol/water partition coefficient were examined for their release behavior from the amphiphilic PCL-b-PEO-b-PCL (PCEC) matrix. Scanning electron micrograph (SEM) of PCEC illustrated a well defined two-phase morphology consisted of dispersed poly(ethylene oxide) (PEO) domain and continuous polycaprolactone (PCL) phase. Differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) experiments veri tied that three model drugs are dissolved as a molecular dispersion in PCEC matrix. The release of hydrophilic aspirin closely followed the water absorption profile of the matrix indicating that its major fraction is present in PEO domain. However, substantial amount of aspirin present in less hydrophilic region displayed discontinuous biphasic release pattern. In the case of omeprazole with intermediate hydrophobicity consistent release behavior was observed for a period of 24 hrs after the rapid liberation of ca. 10% of the drug presumably partitioned in PEO phase. It was ascribed to the fact that the progressive hydration of PCEC matrix gradually increased the chance of drug/water exposure to compensate the exhaustion of device. Naproxen with the highest octanol/water distribution coefficient among three model drugs exhibited a limited release of 35% for 24 hrs. Finally, hydroxypropyl methylcellulose phthalate (HPMCP)/PCEC blend matrix demonstrated an accelerated and quantitative release of hydrophobic naproxen by generating high porosity and thereby expanding polymer/water interface.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.115-128
• /
• 2010

Recently the use heat sink material grows where the polymer filled with thermal conductive fillers effectively dissipates heat generated from electronic components. Therefore the management of heat is directly related to the lifetime of electronic devices. For the purpose of improving thermal conductivity of composites, fillers with excellent thermaly conductive behavior are commonly used. Polymer composites filled with thermally conductive particles have advantages due to their processibility, cheap price, and durability to the corrosion. This paper aims to review the thermal interface materials and their model equations for predicting the thermal conductivity of polymer composites, and to introduce the commercial thermal conductive fillers and their applications.