• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.71-72
• /
• 2006

We investigated a simultaneous living anionic polymerization process of isoprene (I) and 4styrene-d_8$ (S) in $benzene-d_6$ as a solvent with sec-buthyllithium as an initiator into polyisoprene(PI)-block-poly($styrene-d_8$)(PS) and the polymerization-induced molecular self-assembling process. This process was observed in-situ by time-resolved small-angle neutron scattering (SANS) experiment. The SANS profiles measured exhibited three time regions, where (i) the selective growth of PI chains occurs; (ii) the living chain ends switch from isoprenyllithium to styryllithium, and (iii) the SANS exhibited the polymerization induced disorder-to-order transition and order-to-order transition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.251-255
• /
• 2003

This paper presents the design, fabrication, and calibration of a piezoelectric polymer-based sensorized microgripper. Electro discharge machining technology is employed to fabricate super-elastic alloy based micro gripper. It is tested to present improvement of mechanical performance. For integration of force sensor on the micro gripper, the sensor design based on the piezoelectric polymer PVDF film and fabrication process are presented. The calibration and performance test of force sensor integrated micro gripper are experimentally carried out. The force sensor integrated micro gripper is applied to perform fine alignment tasks of micro opto-electrical components. It successfully supplies force feedback to the operator through the haptic device and plays a main role in preventing damage of assembly parts by adjusting the teaching command.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.30-33
• /
• 2002

We have shown that it is possible to form a fibrilar network of fibronectin on a polyelectrolyte polymer film whose dimensions are similar to those reported on the extra cellular matrix. The fibronectin network was observed to form only when the charge density of the polymer was in excess of the natural charge density of the cell wall. Furthermore, the self-organized fibronectin layer was much thicker than the polymer film, indicating that long ranged interaction may playa key role in the assembly process. It is therefore important to understand the structure of the polymer layer/protein interface. Here we report on a neutron reflectivity study where we explore the structure of the polyelectrolyte layer, in this case sulfonated polystyrene (PSSx,), with varying degree of sulfonation (x<30%), as a function of sulfur content and counter ion concentration. These results are then correlated with systemic study of the adsorption and the multilayer formation of fibronectin as a function of incubation time for various sulfonation levels of $PSSx.^1$

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.145-149
• /
• 2005

Recently, polymer insulator and bushing that are used for high voltage application have some advantages such as light weight, small size, vandalism resistance, hydrophobicity and easy making process. The pole mount transformer installed in distribution system is acting direct role in supply of electric power and the electric power device should drive safely for long tenn. In this paper, the polymer bushing of pole transformer is designed adaptively to current assembly method, designed bushing is manufactured on basis of that result. The electric field of designed transformer is investigated by FEM program.

• Macromolecular Research
• /
• 제13권6호
• /
• pp.499-505
• /
• 2005

Ordered mesoporous materials with a hydrothermally-stable, protozeolitic framework were prepared by exploring the direct conversion of inorganic species based on co-surfactant templating systems. To confer hydrothermal stability on the mesoporous aterials, the organic-inorganic hybrids were heat-treated in strongly basic media. Co-surfactant templating systems of cetyltrimethylammonium bromide [$C_{16}H_{13}(CH_{3})_{3}$NBr, CTAB] with 1,3,5-trim­ethylbenzene (TMB) or a nonionic block copolymer of poly(ethylene oxide )-b-poly(propylene oxide )-b-poly(ethyl­ene oxide) ($EO_{20}PO_{70}EO_{20}$) were employed to improve the hydrothermal stability of the organic-inorganic self-assembly during the solid rearrangement process of the inorganic species. The mesoscopic ordering of the pore structure and geometry was identified by X-ray diffraction, small angle neutron scattering and electron microscopy.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1227-1228
• /
• 2006

The electrochemical properties of novel metal powders were investigated for the electrode materias of polymer electrolyte memebrane electrolysis. Two types of Pt black and $IrO_2$ powder electrodes were hot-pressed on the polymer electrolyte membrane to form membrane electrode assembly. The galvanodynamic polarization methode was used to characterize the electrochemical properties of both electrodes. From the experimental results, we concluded that the $IrO_2$ powder electrode exhibits better electrochemical performance than Pt black as cathode material for the electrolysis.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.22-23
• /
• 2011

As device dimensions shrink, it is increasingly important to develop fabrication methods that can create sub-15 nm features of regular or arbitrary geometry in a rapid, parallel, and efficient process. This talk will discuss approaches based on self-assembling hybrid polymers containing Si. The thin films of those materials systems can generate well-ordered periodic arrays of dots or lines. For achieving, long-range ordering, it is helpful to use lithographically-defined templates, which are in general much larger than the length-scale of self-assembled nanostructures. For example, the self-assembly of polymer nanostructures can easily be templated using an array of nanoscale topographical elements that act as guiding templates or surrogates for one of two microdomains. The solvent-vapor-induced tunability of pattern dimension and morphology will be discussed as well. Those material systems can excellently serve for high-precision self-assembly that can provide good resolution, reliability, and controllability and be considered as an option for a future nanomanufacturing technology.

• Macromolecular Research
• /
• 제16권6호
• /
• pp.524-531
• /
• 2008

The mitigation or elimination of methanol crossover for perfluorosulfonic acid fuel cell membranes has been investigated extensively for direct methanol fuel cell applications with the aim of increasing the electrochemical performance and enhancing the utilization rate of methanol. Self-assembly modifications by applying an oppositely charged polyelectrolyte to Nafion membranes were attempted in order to block or reduce methanol crossover while maintaining the other advantageous properties of Nafion membranes. It was reported that anionic polyallylamine hydrochloride (PAH) was the most efficient polyelectrolyte in reducing methanol crossover, and considerable cell performance was obtained even at a methanol feed concentration of 10 M.

• 폴리머
• /
• 제29권6호
• /
• pp.593-598
• /
• 2005

Layer-by-layer(LbL) 자기 조립법에 의한 poly(ethylene-alt-maleic anhydride)(PEMAh)/poly(4-vinyl pyridine)(P4VP) 다층막의 염료 흡착 거동 및 pH 변화에 의한 염료 방출 거동을 Rodamine 6G(R6G)를 지시제로 사용하여 조사하였다. UV-vis 분광 분석을 이용하여 (PEMAh/P4VP)n 다층막의 두께 및 R6G의 흡착 및 방출 거동을 조사하였다. 다층막에 흡착되는 R6G의 흡착량은 필름의 두께 증가에 따라 선형적으로 증가하였다. (PEMAhAh/P4VP)n 다층막의 투과성은 pH 조건에 민감한 거동을 보였으며, 방출액의 pH가 감소할수록 R6G 방출 속도와 방출량은 증가하였다. PEMAh/poly(ethyleneimine)(PEI) capping layer를 (PEMAh/P4VP)n 다층막에 추가로 적층함으로써 흡착된 R6G의 방출 속도를 조절할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제25권8호
• /
• pp.1257-1260
• /
• 2004