• Korean Journal of Optics and Photonics
• /
• v.27 no.4
• /
• pp.143-150
• /
• 2016

The thickness of each layer in a multilayered system is determined by a Fourier-transform method using spectroscopic reflectance measurements. To verify this method, we first generate theoretical reflectance spectra for three layers, and these are fast-Fourier-transformed using our own Matlab program. Each peak of the Fourier-transformed delta function denotes the optical thickness of each layer, and these are transformed to physical thicknesses. The relative thickness error of the theoretical model is less than 1.0% while a layer's optical thickness is greater than 730 nm. A PI-(thin $SiO_2$)-PImultilayeredstructure produced by the bar-coating method was analyzed, and the thickness errors compared to SEM measurements. Even though this Fourier-transform method requires knowing the film order and the refractive index of each layer prior to analysis, it is a fast and nondestructive method for the analysis of multilayered structures.

• Journal of Mechanical Science and Technology
• /
• v.20 no.4
• /
• pp.505-512
• /
• 2006

This paper presents an integrated multifunctional sensor based on MEMS technology, which can be used or embedded in mobile devices for environmental monitoring. An absolute pressure sensor, a temperature sensor and a humidity sensor are integrated in one silicon chip of which the size is $5mm\times5mm$. The pressure sensor uses a bulk-micromachined diaphragm structure with the piezoresistors. For temperature sensing, a silicon temperature sensor based on the spreading-resistance principle is designed and fabricated. The humidity sensor is a capacitive humidity sensor which has the polyimide film and interdigitated capacitance electrodes. The different piezoresistive orientation is used for the pressure and temperature sensor to avoid the interference between sensors. Each sensor shows good sensor characteristics except for the humidity sensor. However, the linearity and hysteresis of the humidity sensor can be improved by selecting the proper polymer materials and structures.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1812-1814
• /
• 1999

The effects of polarity of the polymer on transcription-aligned twisted nematic (TN)-liquid crystal display (LCD) on various the polyimide (PI) surfaces were investigated. The monodomain alignment of nematic (N)LC is obtained in cells fabricated by transcription alignment method on PI surface with medium polarity. The LC alignment using transcription alignment method is attributed to polarity of the polymer. The threshold voltage of transcription-aligned TN-LCD decreases with increasing the polarity of the polymer on three kinds of the PI surfaces. The threshold voltage of transcription-aligned TN-LCD on PI surface with high polarity is almost the same compared to rubbing-aligned TN-LCD. The response time of transcription-aligned TN-LCD decreases with the increasing the polarity of the polymer on all PI surfaces. The decay time of transcription-aligned TN-LCD is slow compared with the rubbing-aligned TN-LCD.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.04a
• /
• pp.42-43
• /
• 1996

고분자 분미막을 이용한 분리기술은 기존의 분리기술에 비하여 에너지의 절약과 높은 분리효율 등의 장점이 있어 거의 모든 산업에 이용되고 있다. 분리막의 용도가 다양화됨에 따라서 내열성, 내약품성, 내유기용매성을 갖는 막소재의 개발이 필요하게 되었다. polyimide(PI)게의 고분자는 물리, 화학적 성능이 우수하고 내열성과 내유기용매성 등이 우수한 열가소성수지로서 film, sheet, tubular형으로 만들 수 있어 한외여과막이나 역삼투막, 기체분리막 등에 이용되고 있다. 그러나 투과속도를 높디고, fouling을 줄이기 위해서는 화학적 개질을 통해 친수성을 높이는 방법이 필요하다. 본 실험에서는 내열성과 내유기용매성이 우수한 polyetherimide계 고분자를 chlorosulfonic acid(CSA)를 이용하여 술폰화시킴으로써, 극성기의 도입에 의해 친수성이 향상된 sulfonated polyetherimide(SPEI)를 합성하였다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2781-2786
• /
• 2013

We examined the effect of electrode fingers and gaps of coplanar interdigitated electrode (IDE) structures to characterize the ammonium salt-containing polyelectrolyte film of resistance-based humidity sensors. IDEs designed for this purpose were flexible gold electrodes deposited on a polyimide substrate using a printing process because the geometry presents a potential for tunable sensitivity over other electrode designs. The basic design of the sensors consisted of IDEs with a different number of electrode fingers such as 3, 4, and 5 and gap sizes of 310, 360, 410, and $460{\mu}m$. Details of the AC complex impedance characteristics such as the Nyquist plot, Bode plot, and activation energy based on electrode construction were investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1125-1131
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on the two kinds of polyimide (PI) surfaces using thin plastic substrates. The NLC pretilt angles generated on thin plastic substrates are higher than that on the glass substrate. We study that AFM (atomic force microscope) image of rubbed PI surface with polymer film has formed the micro-groove. Also, EO characteristics of the TN-LCD with a rubbed PI surface based on polymer are almost the same as that of the TN-LCD with a rubbed PI surface based on glass.

• Journal of Welding and Joining
• /
• v.25 no.2
• /
• pp.76-81
• /
• 2007

Solder bumps have been used to interconnect the chip and substrate, and the size of the solder bump decreases below $100{\mu}m$ to accommodate higher packaging density. In order to fabricate solder bumps, a mold to chip transfer process is suggested in this work. Since the thin stainless steel mold is not wet by the solder, the molten solder is forced to fill the mold cavities with ultrasonic vibration. The solders within the mold cavities are transferred to the Cu pads on the polyimide film through reflow soldering.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1087-1090
• /
• 2005

In precision machinery systems for medical and chemical applications, micropumps with a low pulsation have been demanded and investigated for accurate delivery of a small amount of liquid. This study proposes sheet type check valves instead of ball type check valves for PZT pumps and performs some tests on dynamics characteristics of check valves having different design parameter with variable frequency. The selected materials of check valves is NBR, PP film, Polyimide and Stainless steel(SUS304). In the experiment, dynamic characteristics of stainless steel thin plate have better performance than others.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.2
• /
• pp.224-231
• /
• 2009

Techniques measuring Maxwell displacement current (MDC) and LB films surface measuring technique have been applied to the study of monolayers of polyamic acid containing azobenzene. MDCs was generated from monolayers on the water surface by monolayer compression and expansion. It was generated when the area per molecule was about $103{\AA}^2\;and\;78{\AA}^2$ just before the initial rise of the surface pressure during the 1st and 2nd mixed monolayer compressions cycle, respectively. It was the maximum of MDCs appeared at the molecular area just before the initial rise of surface pressure in compression cycles, and we have found that the increase of aggregations causes the noticeable increase of the surface roughness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.120-122
• /
• 1997

In this paper, the viewing angle characteristics of amorphous (a) - twisted nematic (TN) - liquid crystal display (LCD) on poly(viny)cirmamate (PVC) alignment surfaces were investigated. It was found that the threshold voltage is increased with increasing the polymerization on PVC surfaces. We suggest that the threshold voltage is affected to the surface anchoring strength with increasing the polymerization of the alignment film. Also, we obtained that the viewing angle of a-TN-LCD is increased with increasing the polymerization on PVC surfaces. Finally, we considered that the viewing angle of a-TN-LCD on PVC surfaces is large compared to TN-LCD on rubbed polyimide (Pl) surface.