• Macromolecular Research
• /
• v.16 no.2
• /
• pp.113-119
• /
• 2008

A series of amphiphilic dendrons n-18 (n: generation number, 18: octadecyl chain) based on an aliphatic polyether denderitic core and octadecyl peripheries were synthesized using a convergent dendron synthesis consisting of a Williamson etherification and hydroboration/oxidation reactions. This study investigated their thermal and self-assembling behavior in the solid state using differential scanning calorimetry (DSC), Fourier transform infrared (FT-IR) absorption spectroscopy, and small angle X-ray scattering (SAXS). DSC indicated that the melting transition and the corresponding heat of the fusion of the octadecyl chain decreased with each generation. FT-IR showed that the hydroxyl focal groups were hydrogen-bonded with one another in the solid state. DSC and FT-IR indicated microphase-separation between the hydrophilic dendritic cores and hydrophobic octadecyl peripheries. SAXS data analysis in the solid state suggested that the lower-generation dendrons 1-18 and 2-18 self-assemble into lamellar structures based upon a bilayered packing of octadecyl peripheries. In contrast, the analyzed data of higher-generation dendron 3-18 is consistent with 2-D oblique columnar structures, which presumably consist of elliptical cross sections. The data obtained could be rationalized by microphase-separation between the hydrophilic dendritic core and hydrophobic octadecyl peripheries, and the degree of interfacial curvature associated with dendron generation.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.321-328
• /
• 2018

Wet polyurethane resin was synthesized by using polytrimethylene ether glycol prepared from 1,3-propanediol produced by fermentation from corn sugar as bio polyol and polyether-polyol(PTMG). Physical properties and cell characteristics by wet coagulation were investigated using the synthesized wet polyurethane resin. The tensile strength of wet polyurethane resin decreased with increasing content of bio polyol as copolymer polyol, but it tended to increase elongation at break and tear strength. As a result of thermal characteristic analysis, it was found that the glass transition temperature was slightly increased as the content of bio polyol increased. As a result of comparing the cell characteristics by the wet coagulation method, it was found that the shape of the cell was good when the ether polyol and the bio polyol were used alone.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.2
• /
• pp.210-217
• /
• 2022

Chemical warfare agents(CWA) such as nerve agents and vesicating agents show lethality by skin contamination. Skin protection, therefore, is one of the top priorities to deal with the growing threat from CWA. In an attempt to develop the most effective topical skin protectant(TSP), candidate substances including PFPE(perfluorinated polyether), PTFE(polytetrafluoroethylene), glycerin, and polysaccharides were evaluated in forms of various formulations against nerve agent simulant DMMP(dimethylmethyl phosphonate) penetration. The protective efficacy of the formulation against DMMP penetration was estimated as the onset time of color change of the KM9 chemical agent detection paper. Based on this study, it was found that several PFPE- and glycerin-based formulations exhibit remarkably superior efficacy as a protective cream. This protective cream is expected to be used as TSP for military application after further research.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.338-345
• /
• 2015

Poly(phenylene oxide) (PPO) and polyether imide (PEI) were sulfonated and aminated to create sulfonated poly(phenylene oxide) (SPPO) and aminated polyether imide (APEI), respectively. Characterization of the SPPO and APEI were performed via measurements of FTIR, thermogravimetry (TGA), swelling degree, ion exchange capacity (IEC), and ion conductivity. Next, the surfaces of these membranes were modified by surface fluorination at room temperature. The surface fluorinated SPPO and APEI membranes underwent characterization again for the mentioned measurements to determine any differences. The 3 types of bi-polar membranes were prepared by varying the IEC of the APEI at a fixed SPPO IEC value, which were applied to the low and high NaCl concentration of feed solution at the different current density, respectively. The hypochlorite concentration derived from the surface fluorinated membranes was dependent on the IEC of the APEI and ranged from 491 to 692 ppm at $80mA/m^2$. At low current density of $5mA/m^2$, the hypochlorite concentrations ranged from 18 to 28 ppm for the 4 hrs surface fluorinated membranes and their durability increased greatly.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1549-1550
• /
• 2013

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.29-32
• /
• 1998

Segmented block copolyetheresters defined as copolymers having sequences of alternating polyester hard blocks and polyether soft blocks create labile physical cross-links upon crystallization of hard polyester blocks Since the nature of the physical interlocking is a crystallite formed exclusively from the crystallizable hard segment, the basic understanding of interrelationship between crystallization condition and phase morphology is very important for the property control of the segmented block copolyetheresters. (omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.232-235
• /
• 1998

ion conducting polymers have been extensively investigated because of their potential application as an electrolyte in solid state batteries [1]. Among the polymer electrolytes, solid polymer electrolytes (SPEs) composed of ion conducting polymer and alkali metal salt have many advantages such as high ionic conductivity, high energy density and light weight. This made them suitable replacement for liquid electrolytes. (omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.33-36
• /
• 1998

Segmented block copolyetheresters defined as copolymers having sequences of alternating polyester hard blocks and polyether soft blocks create labile physical cross-links upon crystallization of hard polyester blocks Since the nature of the physical interlocking is a crystallite formed exclusively from the crystallizable hard segment, the hard segment content (HSC) and hard segment length (HSL) will play an important role in determining the properties such as mechanical property and dynamic mechanical property. (omitted)

• Journal of the Korean Chemical Society
• /
• v.6 no.1
• /
• pp.19-24
• /
• 1962

In the emulsion polymerization of vinyl acetate with Triton-X(Alkyl-aryl-polyether alcohol) and polyvinyl alcohol as emulsifier, some relations between the conditions of polymerization and the polymerization rate, polymerization degree and stability of the emulsion are studied and discussed.

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 1997.06a
• /
• pp.159-169
• /
• 1997

ABA-type(or AB) block copolymers composed of poly(${\gamma}$-alkyl L-glutamate) (PALG)[or poly(L-leucine)] as the A component and polyether[or poly (N-isopropy1 acrylamide) as the B component were synthesized by polymerization of (${\gamma}$-alkyl L-glutamate N-carboxyanhydride initiated by primary amined located at both(or one) ends of the polymer chains. Structural studies of the block copolymers were performed in the solution and solid state. Also, artificial skin, drug delivery system of the block copolymers and cell attachment onto the copolymer were carried out for biomedical applications.