• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.193-194
• /
• 2018

In this study, various materials such as epoxy material, urethane material, cement material, and acrylic material are used to solve the water leakage occurring in underground structures. However, in the reality that the durability is insufficient and the effect is insufficient, it is aimed to improve the repairing effect by using acrylics. As a second study, it is confirmed that leachate can be used as a repair material by considering long time under water stability, elongation range test, fatigue resistance test, tube stability test, damage recovery performance ana temperature stability considering leakage environment for polyacrylate. In addition, this material is applied to Expansion Joint to perform leakage repair, and to verify the effect of repairing leakage by monitoring and visual observation of concrete humidification.

• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.317-322
• /
• 2015

PURPOSE. The aim was to evaluate the effect of curing mode and different dentin surface pretreatment on microtensile bond strength (${\mu}TBS$) of self-adhesive resin cements. MATERIALS AND METHODS. Thirty-six extracted human permanent molars were sectioned horizontally exposing flat dentin surface. The teeth were divided into 12 groups (3 teeth/group) according to the dentin surface pretreatment methods (control, 18% EDTA, 10% Polyacrylic acid) and curing mode (self-curing vs. light-curing) of cement. After pretreatment, composite resin blocks were cemented with the following: (a) G-CEM LinkAce; (b) RelyX U200, followed by either self-curing or light-curing. After storage, the teeth were sectioned and ${\mu}TBS$ test was performed using a microtensile testing machine. The data was statistically analyzed using one-way ANOVA, Student T-test and Scheffe's post-hoc test at P<.05 level. RESULTS. For G-CEM LinkAce cement groups, polyacrylic acid pretreatment showed the highest ${\mu}TBS$ in the self-cured group. In the light-cured group, no significant improvements were observed according to the dentin surface pretreatment. There were no significant differences between curing modes. Both dentin surface pretreatment methods helped to increase the ${\mu}TBS$ of RelyX U200 resin cement significantly and degree of pretreatment effect was similar. No significant differences were found regarding curing modes except control groups. In the comparisons of two self-adhesive resin cements, all groups within the same pretreatment and curing mode were significantly different excluding self-cured control groups. CONCLUSION. Selecting RelyX U200 used in this study and application of dentin surface pretreatment with EDTA and polyacrylic acid might be recommended to enhance the bond strength of cement to dentin.

• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.8-20
• /
• 2006

This research was conducted to determine the plant growth and nutrient contents of potted chrysanthemum 'Lima Honey' as influenced by application rate of dolomite in three root media, peatmoss+vermiculite (1:1, v/v), peatmoss+composted rice hall (1:1, v/v), and peatmoss+composted pine bark (1:1, v/v). All root media contained polyacrylic acid sodium salt (PASS) at a rate of $4.5g L^{-1}$. In crop growth at 40 and 80 days after transplanting, elevated application rates of dolomite up to $6.0g L^{-1}$ in three root media increased fresh and dry weights per plant. But the treatment of $9.0g L^{-1}$ had less fresh and dry weights than those of $6.0g L^{-1}$. Tissue phosphorus content decreased and those of Ca and Mg increased by the elevated application rates of dolomite. Elevated application rates of dolomite in three root media resulted in the increase of pH, EC, and the concentrations of K, Ca, and Mg at 43 days after transplanting. Those at 80 days after transplanting were also increased, but the differences among treatments were less significant as compared to those at 43 days after transplanting. From the results of dry weight in potted chrysanthemum 'Lima Honey', the proper application rate of dolomite to three root media containing PASS at a rate of $4.5g L^{-1}$ were $6.0g L^{-1}$.

• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.35-46
• /
• 2006

Objective of this research was to determine the effect of application rate of a slow release fertilizer (SRF) in three root media, peatmoss+vermiculite (1:1, v/v; PV), peatmoss+composted rice hall (1:1, v/v; PR), and peatmoss+composted pine bark (1:1, v/v; PB), on growth and nutrient contents of potted chrysanthemum 'Lima Honey'. All media contained polyacrylic acid sodium salt at a rate of $4.5g L^{-1}$. The fresh and dry weights at 43 days after transplanting did not show statistical differences among treatments in each root media. Elevated application rate of SRF increased fresh and dry weights at 80 days after transplanting in PV and PB media, but not in PR medium. Elevated application rates of SRF resulted in the increase of tissue phosphorus content and decrease of tissue Ca, Na, and Zn contents at both 43 and 80 days after transplanting. Elevated application rates of SRF resulted in the decrease of pH and increase of EC and concentrations of ${NO_3}^-$ and ${P_2O_5}^{3-}$, K, Ca, and Mg in the soil solution of PV and PR media. The trends of those in PR media were also similar except ${NO_3}^-$. The differences among treatments in EC at 80 days after transplanting were less significant as compared to those at 43 days after transplanting in three media.

• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.21-34
• /
• 2006

This research was conducted to determine the plant growth and nutrient contents of potted chrysanthemum 'Lima Honey' as influenced by application rate of fused superphosphate (FSSP) in three root media, peatmoss+vermiculite (1:1, v/v; PV), peatmoss+composted rice hall (1:1, v/v; PR), and peatmoss+composted pine bark (1:1, v/v; PB). All root media contained polyacrylic acid sodium salt at a rate of $4.5g L^{-1}$. The treatment of $1.4g L^{-1}$ in PV and those of $0.7g L^{-1}$ in PR and PB had the greatest fresh and dry weights in each root medium at both 43 and 80 days after transplanting. Elevated application rates of FSPP increased tissue contents of N, P, and K at both 43 and 80 days after transplanting in PV medium. However, the differences in tissue contents of N, P and K in PR medium were less significant among treatments of FSPP. The pre-planting FSPP also less affected the tissue contents of nutrients at 80 days after transplanting as compared to those at 43 days after transplanting. Elevated application rates of FSPP in PV medium increased EC and the concentrations of $NO_3,\;P_2O_5$, K, Ca, and Mg in soil solution of root media at 43 days after transplanting. The EC in PV medium at 80 days after transplanting was higher than that at 43 days after transplanting. The EC in all root media at 80 days after transplanting was not different among treatments of FSPP.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.95-103
• /
• 1992

The purpose of this study was to evaluate the effect of the dentin pretreatment on the marginal leakage of a glassionomer cement. 1n this study, 60 molars with sound and healthy crown portion were used. The dentin surface of these teeth were exposed and polished with 600 grit silicon carbide paper. Square - shaped cavities were prepared on the flattened dentin surfaces and these were divided into 4 groups according to the dentin pretreatment procedures. Group I : Dentin pretreatment with distilled water as a control group. Group II : Dentin pretreatment with 5% sodium hypochlorite solution. Group III : Dentin pretreatment with Ketac conditioner. Group IV : Dentin pretreatment with 40% polyacrylic acid. The degrees of dye penetration in the cavity walls were assessed using a stereoscope at ${\times}40$ magnification according to the maximum dye penetration. The results were analyzed by using Mann - Whitney U test. The results were as follows : 1. All groups showed varying depth of dye penetration. 2. Distilled water group showed the most severe marginal leakage when compared with the other groups(P<0.05). 3. 40% polyacrylic acid group showed the least amount of marginal leakage compared with the other groups (P<0.05). 4. There were significant differences between Goup I(distilled water) and Group IV (40% polyacrylic acid)(P<0.05), but there were no significant differences among Group I(distilled water), Group II(sodium hypochlorite), Group III(Ketac conditioner) (P>0.05).

• 한국세라믹학회지
• /
• 제39권11호
• /
• pp.1097-1102
• /
• 2002

$Ca(NO_3)_2{\cdot}4H_2O$와 $(NH_4)_2HPO_4$를 사용하여 습식침전법으로 수산화아파타이트(HAp) 분말을 합성하고, 합성된 HAp와 폴리아크릴산(PAA)을 혼합하여 균질의 복합체 4종을 제조하였다. 합성 HAp는 ICP 분석으로 Ca/P비를 정량하였고, HAp/PAA 복합체는 TGA로 열적 성질을 조사하였다. pH 11 및 $60{\circ}C$에서 합성된 HAp의 결정성이 가장 우수하였고, Ca/P비는 1.35~1.49의 범위로 정량되어 Ca 결손의 HAp를 얻었다. HAp/PAA 복합체에서 PAA의 양이 증가함에 따라 비표면적이 증가하였다. 또한 HA/PAa 균질복합체의 $800{\circ}C$에서 무게감량은 3.5~9.6%의 범위로 감소하여 바인더인 PAA가 분해되는 것을 알 수 있었다. HAp/PAA 복합체의 FT-IR 분석결과, HAp의 $Ca^{2+}$ 이온과 PAA의 카르복실기 사이에서 이온결합이 형성되는 사실을 확인할 수 있었다.

• Korean Chemical Engineering Research
• /
• 제52권4호
• /
• pp.530-537
• /
• 2014

수분은 제품의 물리적 변화, 미생물 성장, 화학적 반응을 일으켜 품질을 저하시키는 주요 요인이 된다. 본 연구는 기능성 포장 필름으로 응용하기 위하여 수분을 흡착력이 우수한 폴리아크릴산 나트륨 염(polyacrylic acid partial sodium salt, PAPSS)을 선상저밀도폴리에틸렌(LLDPE) 고분자 수지에 함침된 수분 흡착 기능을 가진 복합 필름을 제조하였다. 제조한 수분 흡착 복합 필름은 PAPSS 물질 입자가 LLDPE 고분자 매트릭스에 잘 분포되어 있음을 확인하였다. 또한 PAPSS 첨가량이 증가됨에 따라 필름의 투명도가 저하되었다. 고분자에 첨가되는 PAPSS 물질의 증가는 복합 필름의 인장강도와 신장률 값이 감소됨을 확인할 수 있었으나 각각 0.5, 1, 그리고 2% PAPSS 필름들 간에는 큰 유의적 차이를 보이지 않았다. 반면 4% PAPSS 함침 필름은 다른 농도로 PAPSS 물질이 함침된 필름과 비교하여 인장강도 및 신장률 값의 급격한 감소를 나타냈다. PAPSS 함량의 증가는 필름의 산소 및 수분 투과도 값이 감소됨이 관찰되어 고분자에 PAPSS 첨가는 필름의 가스 차단의 개선을 나타냈다. PAPSS 함침 필름들은 상대적으로 높은 습도 환경 조건에서 우수한 수분 흡착율을 나타내는 것을 확인하였으며, 특히 4% PAPSS 함침 필름이 다른 PAPSS 농도 함침 필름들에 비하여 높은 수분 흡착율을 보였다. $25^{\circ}C$ 조건에서 필름 샘플의 수분 흡착 등온 곡선에 가장 적합하게 묘사되는 최적의 모델 방정식은 GAB 모델로 나타냈다. PAPSS 첨가는 고분자 필름의 결정화 및 녹는 온도 변화에 영향을 보였으나, 열중량 변화에는 큰 차이가 없이 안정된 열적 특성을 나타냈다.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.104-114
• /
• 1992

The purpose of this study was to evaluate the shear bond strength of glass ionomer cement(Ketacfil, ESPE, Co.) against dentin surface which had been treated with surface conditioning agents(distilled water, 5% sodium hypochlorite solution, Ketac - conditioner, 40% polyacrylic acid). In this study, 60 human molars with sound and healthy crown portion which were previously extracted for orthodontic or periodontal problem. The dentin surfaces of these teeth were exposed with wet trimmer and polished with 150 - grit and 600 - grit silicon carbide paper and the teeth were divided into four groups(15 teeth per group) according to the following surface conditioning methods. Group I : Surface treatment with distilled water as control group. Group II : Surface conditioning with 5% sodium hypochlorite solution. Group III : Surface conditioning with Ketac conditioner. Group IV : Surface conditioning with 40% polyacrylic acid. The shear bond strengths were measured by Autograph(Shimatzu Co. Japan). The result of the evaluations were then subjected to statistical analysis using one - way analysis of variance and Duncan test and the results were as follows : 1. The shear bond strength accrding to the dentin surface conditioning conditions was highest in Ketac conditioner group, with measurements of $44.44{\pm}0.74(kg/cm^2)$ and lowest in the distilled water group, with measurements of $28.84{\pm}0.88(kg/cm^2)$. 2. Statistically significant differences were found between surface conditioning with 5% sodium hypochlorite solution group or Ketac conditioner group and distilled water group(P<0.01). 3. Also, statistically significant difference was found between surface conditioning with distilled water group and 40% polyacrylic acid group(P<0.05). 4. Overall difference in statistical significance between the groups was not found (P<0.05). 5. Fractured dentin surface treated with conditioning solutions showed cohesive fracture. 6. Distilled water group and 5% sodium hypochlorite solution group removed the smear layer less effectively. 7. Conditioning dentin with Ketac conditioner and 40% polyacrylic acid resulted in the removal of a significant amount of the smear layer without removing the tubular plugs and dissolving the peritubular dentin.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1999년도 춘계학술발표강연 및 눈문개요집
• /
• pp.118-118
• /
• 1999