• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.1152-1166
• /
• 2023

The bubbly flow of air or steam in subcooled water are investigated here in several test cases, characterized by different pipe sizes, bubble dimensions and flow rates, by means of CFD using a Eulerian-Eulerian approach. The performance of models that differ for the turbulence closure in the continuous phase, as well as for the description of the lift force on the dispersed phase, are compared in detail. When air is considered, the space of the experimental parameters leading to a reasonable performance for the selected models are identified and discussed, while the issues left in the modelling of the concurrent condensation are highlighted for the cases where steam is used.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.1
• /
• pp.1-4
• /
• 2002

A simple method for real-time monitoring the molecular orientation in a polymeric film was suggested. This method was examined in the polarization holograms by two recording beams on a poly(malonic ester) containing disperse red 1. The spatial distributions of the photo-induced alignment were measured and analyzed at various polarization states of two recording beams. As the result, the directions of molecular alignments could be identified easily by our method.

• Textile Coloration and Finishing
• /
• v.14 no.5
• /
• pp.268-276
• /
• 2002

Poly(trimethylene terephthalate)(PTT) and Poly(ethylene terephthalate)(PET) fibers were annealed at various temperatures ranging from $100^\circ{C}$ to $230^\circ{C}$ for 10 min under tension and tension free. Dyeing rates and absorption isotherms of both fibers were obtained with C.I. Disperse Red 60 at 100, 120 and $130^\circ{C}$ in water system. Also X-ray diffraction pattern, moisture regain and water absorption were investigated. The dyeing rate of PTT fiber is faster than PET fiber, and dyeing of PTT fiber begin at lower temperature compared to PET fiber. The absorption isotherms from both fibers with disperse dye we nearly linear up to the saturation dye uptake, which increase with dyeing temperature. Equilibrium dye uptake of PTT fiber annealed under tension above $180^\circ{C}$ was remarkably decreased because of a changes in the fine structure of fiber. The intensities of X-ray diffraction peaks of both annealed fibers were increased with increasing in annealed temperature. The reflections observed at $2\theta$=$15.8^\circ$, $24^\circ$ and $25.2^\circ$ were assigned reflection of crystal at the planes of (010), $(1\bar02,\;\bar112),\;and\;(\bar13,\; \bar113)$ respectively, and the peak became sharp with heat setting temperature.

• Textile Coloration and Finishing
• /
• v.13 no.3
• /
• pp.197-202
• /
• 2001

The mechanical properties and dyeability of Poly(trimethylene terephthalate)(PTT) were investigated and compared to PET. Glass transition temperature of PTT was lower than that of PET, because amorphous region of PTT is mote flexible. n has smaller molecular and specific stress and larger strain than those of PET, due to the difference of molecular structure. Dyeing transition temperature of PTT was lower by $20^\circ{C}$ than that of PET. Because PTT has flexible chain and zigzag structure, dyeing Fate of PTT is faster than PET and dyeing of PTT is begun at lower temperature. As the hydrophobicity of disperse dyes increased, the ratio of equilibrium dye uptake on PTT to that on PET was increased.

• Journal of the Korean Magnetic Resonance Society
• /
• v.9 no.2
• /
• pp.155-162
• /
• 2005

The interaction of poly(ethylene glycol)(PEG) with cationic dodecyl trimethyl ammonium bromide (DTAB)micelle was studied with electron spin resonance (ESR) by determining line widths of the ESR spectra and coupling constant of nitrogen($A_N$). The degree of ESR line shape change such as line widths and coupling constant indicated that PEG mixes well with DTAB micelle due to a great hydrophobic interaction with surfactant alkyl chains. This suggests that the PEG can be used as non-ionic surfactant to disperse the exposed oil in the ocean.

• Textile Coloration and Finishing
• /
• v.7 no.3
• /
• pp.11-14
• /
• 1995

Effect of low temperature oxygen plasma treatment on the weight loss of poly (ethylene terephthalate) fiber heat-treated at various temperatures was studied using two kinds of plasma apparatus. Investigation was done on the basis of the increased crystallinity up to about 160 $^{\circ}C$, above this temperature weight loss increased significantly with the increased crystallinity in spite of crystallinity increased according to the increased heat-set temperature. The weight loss showed a minimum at about 160 $^{\circ}C$ just like in dyeing of poly(ethylene terephthalate) fiber with disperse dye.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.465-466
• /
• 1999

섬유층 여과기(fibrous filter)는 일반적으로 공기여과기(air filter) 라고 불리는 여과기로 fiber의 직경, filter의 두께, 공극률, 하전 여부에 따라 그 용도가 다양하다. 전하를 가진 섬유로 제조한 정전 필터는 장시간 사용시에 일반 섬유층 필터에 비해 작은 압력강하와 높은 집진 효율을 나타내기 때문에 성능과 수명이 증가한다.(중략)

• Journal of Powder Materials
• /
• v.11 no.3
• /
• pp.217-223
• /
• 2004

Submicron nickel powders were prepared from aqueous solution under hydrothermal condition. The experimental conditions including the types of protective agents, concentration of the solution and the pH were studied in detail. Starting concentration of nickel ion is a dominant factor affecting particle size. It was shown that the subsequent addition of Poly Vinyl Pyrrolidone(PVP) and Sodium Dodecyle Sulfate(SDS) can help to disperse the nickel powder. X-ray diffraction and SEM were employed to characterize the products.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.29-32
• /
• 2003

Multi -walled carbon nanotube(MWNT)/poly(methyl methacrylate) composites were fabricate d through film casting. Manufacturing process was established using a ultrasonic cleaner and a homogenizer. Acetone was used as a solvent to melt PMMA and mix with MWNT. The ultrasonic cleaner performed an important role in producing MWNT/MMA nanocomposites. Ultrasonic energy was utilized to disperse MWNT in acetone. Also, melting PMMA in acetone and mixing MWNT and PMMA were achieved using the homogenizer. It was confirmed that the nanohlbes were well dispersed in PMMA according to SEM images.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.63-74
• /
• 1997

Polyurethane microcapsules were synthesized by interfacial polymerization in an aqueous poly(ethylene glycol) dispersion with ethylenediamine as chain extender of toluene diisocyanate in perfume oil using poly(vinyl alcohol) as the stabilizing agent. The effect of chemical structure on the average particle size and distributions, morphologies, and thermal properties to design microcapsules for the sustained release system was investigated. It came to be known that polyurethane microcapsules with ethylene diamine as chain extender had a rounder, more permeable and controlled release membranes. And the release test of polyurethane microcapsules with different soft segment content was done to certify the effect of long methylene chain. According to the higher molecular weight of polyether polyol, the release rate of microencapsulated disperse dye molecular was faster.