• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.45-49
• /
• 2016

In the presence of poly(4-styrene sulfonate) (PSS) and excess amount of graphene oxide (GO), we conducted in-situ polymerization of 3,4-ethylenedioxythiophene (EDOT) without an oxidant. XPS and IR spectroscopies of the product (GO-P) showed that PEDOT/PSS was successfully synthesized by oxidative polymerization of EDOT and hybridized with GO. GO-P displayed a stable aqueous suspension, however, the high content (42%) of GO in GO-P diminished electrical conductivity down to $15S{\cdot}m^{-1}$. Annealing of GO-P films at $200^{\circ}C$ for 8 hr induced partial reduction of GO and finally enhanced electrical conductivity up to $212S{\cdot}m^{-1}$.

• Elastomers and Composites
• /
• v.52 no.4
• /
• pp.272-279
• /
• 2017

The heterocoagulation of latex is a simple and useful method to fabricate various polymer nanocomposites in which a precise control of the colloid stability is essential. In this work, a multi-layered graphenes (MLGs)/poly(styrene-co-butyl acrylate) (P(S-co-BA)) nanocomposite having an excellent dispersion of MLGs was prepared via the sudden heating heterocoagulation process. The P(S-co-BA) component was obtained by emulsion polymerization. This process can effectively shorten the process and particles growth steps. The colloid stability of these dispersions was controlled by factors such as ionic charge, temperature, and reaction times. The influence of these factors on heterocoagulation was evaluated and the properties of the nanocomposites were investigated. The conductivity of the MLGs/P(S-co-BA) nanocomposites increased from -11.53 to -5.70 S/cm for an increase in MLG content from 0.01 to 5 wt%. Moreover, percolation threshold was observed in the case of 0.01 wt% MLGs.

• Microbiology and Biotechnology Letters
• /
• v.20 no.4
• /
• pp.363-370
• /
• 1992

Microorganisms capable of accumulating poly-p-hydroxybutyric acid(PHB) were isolated from soil by enrichment culture technique. Among them, the strain designated as FL-027 had high PHB productivity and was identified as Alcaligenes. The optimal medium composition for cell growth was 8.0 $g/\ell$ of fructose and 3.0 $g/\ell$ of $(NH_4)_2S0_4$, equivalent to C/N ratio 5.04 at pH 7.0 and $30^{\circ}C$. To investigate the optimal conditions for the PHB accumulation, we divided the process into two stages; the first stage for the growth of the cell in nutrient-rich medium and the second stage for the PHB accumulation in nutrient-deficiency medium. The optimal conditions for PHB accumulation were 8.0 $g/\ell$ of fructose and 0.25 $g/\ell$ of $(NH_4)_2S0_4$, equivalent to C/N ratio 60 at pH 6.5 and $30^{\circ}C$. PHB accumulation was stimulated by deficiency of nutrients such as $NH_4^+$, $Ca^{2+}$, $SO_4^{2+}$ in medium. Among them. $NH_4^+$ deficiency was chosen because of its effectiveness. We found the inhibition of cell growth by fructose in batch culture. In order to keep the fructose concentration at an optimal level, intermittent feeding fed-batch culture was employed, and the cell concentration as high as 10.83 $g/\ell$ whose PHB content was responsible for 43% of the dry cell weight. The purified PHB was identified as homopolymer of 3-hydroxybutyric acid by using IR and $^1H-NMR$.

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.296-304
• /
• 1992

Porous polyurethane membrane was prepared by the phase inversion process with variable permeability in response to pH and solvent composition. Hydrophilic polymers were grafted on the surface of the symmetric porous membrane. Porous polyurethane membrane was obtained in DMSO/methanol. It was subsequently grafted with acrylamide on the surface with ceric ammonium nitrate(CAN) as a initiator, followed by the hydrolysis to obtain poly(acrylic acid-g-urethane) (PAA-g-PU) membrane. The change in permeability of vitamine $B_2$(riboflavin) was investigated through PAA-g-PU. For PAA-g-PU membrane, permeability increased with the decrease in pH, and with an increase in solvent content in sink solution.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.3
• /
• pp.167-171
• /
• 1995

A bacterial strain C-02 using methanol as a carbon source was isolated from Gumi Industrial Estate and selected based on its rapid growth and capability of poly-$\beta$-hydroxybutyrate accumulation. Characteristics of strain C-02 showed that it belongs to the Methylococcaceae family, Type II subgroup. Strain C-02 could incorporate valerate into the PHB chain to form 3-hydroxybutyrate and 3-hydroxyvalerate (P(3HB-co-3HV)). Among various nutrient limitation tests, the nitrogen limitation test resulted in the highest content of P(3HB-co-3HV) per dry cell weight, 50$%$. Under the nitrogen limited condition, the average molecular weight of P(3HB-co-3HV) obtained was determined to be approximately $2.8\times 10^5$ daltons.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.610-620
• /
• 2000

Vinyl acetate (VAc) was polymerized at 30, 40, and 5$0^{\circ}C$ using 2,2'-azobis (2,4-dimethylvaleronitrile) (ADMVN) and tertiary butyl alcohol (TBA) as the initiator and the solvent, respectively. High molecular weight (HMW) atactic poly(vinyl alcohol) (PVA) was prepared by saponifying the poly(vinyl acetate) (PVAc) synthesized. The effect of polymerization conditions were investigated in terms of conversion, degree of branching for acetyl group of PVAc, and molecular weight of both PVAc and PVA. The polymerization rate of VAc in TBA was proportional to the 0.49th power of ADMVN concentration in good accordance with the theoretical value of 0.5. HMW-PVA with high yield could be obtained successfully, probably due to lower polymerization temperature and decreased chain transfer reaction rate which was achieved by adopting ADMVN and TBA. PYAc having average degree of polymerization (P$_{n}$) of 10000~13000 was obtained at the conversion of 35~70%. Saponification of so prepared PVAc yielded PVA having P$_{n}$ of 2400~6100. The syndiotactic diad content increased with decreasing polymerization temperature and increasing VAc concentration due to a steric hindrance effect of TBA during polymerization.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1235-1242
• /
• 2019

In this study, prepolymer was synthesized through the reaction of isoporon diisocyanate (IPDI) and dimethylolbutanoic acid (DMBA) based on poly (tetramethylene ether) glycol (PTMG) for the synthesis of water-soluble polyurethane to be used as a leather surface coating applied with ethyl acetate and piperazine. Thereafter, the piperazine was chain-extended with 0.01 M, 0.03 M, 0.05 M, and 0.07 M in the water-dispersed resin, and the tensile strength, elongation, CV (cyclic voltammetry), and solvent resistance analysis were performed. Tensile strength of the prepared sample was measured at 5.422 kg_f/㎟ when the piperazine content was 0.07M, and elongation was measured as 587% when the piperazine was 0.01M. Solvent resistance analysis showed the same solvent resistance regardless of piperazine content, and the redox potential was changed according to piperazine content through CV measurement.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.202-214
• /
• 2015

Stimuli-responsive biomaterials that alter their function through sensing local molecular cues may enable technological advances in the fields of drug delivery, gene delivery, actuators, biosensors, and tissue engineering. In this research, pH-responsive hydrogel which is comprised of dimethylaminoethyl methacylate (DMAEMA) and 2-hydroxyethyl methacrylate (HEMA) was synthesized for the effective delivery of doxorubicin (Dox) to breast cancer cells. Cancer and tumor tissues show a lower extracellular pH than normal tissues. DMAEMA/HEMA hydrogels showed significant sensitivity by small pH changes and each formulation of hydrogels was examined by scanning electron microscopy, mechanical test, equilibrium mass swelling, controlled Dox release, and cytotoxicity. High swelling ratios and Dox release were obtained at low pH buffer condition, low cross-linker concentration, and high content of DMAEMA. Dox release was accelerated to 67.3% at pH 5.5 for 6-h incubation at $37^{\circ}C$, while it was limited to 13.8% at pH7.4 at the same time and temperature. Cell toxicity results to breast cancer cells indicate that pH-responsive DMAEMA/HEMA hydrogels may be used as an efficient matrix for anti-cancer drug delivery with various transporting manners. Also, pH-responsive DMAEMA/HEMA hydrogels may be useful in therapeutic treatment which is required a triggered release at low pH range such as gene delivery, ischemia, and diabetic ketoacidosis.

• Journal of Life Science
• /
• v.29 no.1
• /
• pp.76-83
• /
• 2019

In this study, the optimal growth and poly(3-hydroxybutyrate) (PHB) biosynthesis of Pseudomonas sp. EML2 were established using waste frying oil (WFO) as a cheap carbon source. The fatty acid composition of WFO and fresh frying oil (FFO) were analyzed by gas chromatography. The unsaturated and saturated fatty acid contents of the FFO were 82.6% and 14.9%, respectively. These contents changed in the WFO. The compositional change in the unsaturated fatty acid content in the WFO was due to a change in its chemical and physical properties resulting from heating, an oxidation reaction, and hydrolysis. The maximum dry cell weight (DCW) and PHB yield (g/l) of the isolated strain Pseudomonas sp. EML2 were confirmed under the following culture conditions: 30 g/l of WFO, 0.5 gl of $NH_4Cl$, pH 7, and $20^{\circ}C$. Based on this, the growth and PHB yield of Pseudomonas sp. EML2 were confirmed by 3 l jar fermentation. After the cells were cultured in 30 g/l of WFO for 96 h, the DCW, PHB content, and PHB yield of Pseudomonas sp. EML2 were 3.6 g/l, 73 wt%, and 2.6 g/l, respectively. Similar results were obtained using 30 g/l of FFO as a carbon source control. Using the FFO, the DCW, PHB content, and PHB yield were 3.4 g/l, 70 wt%, and 2.4 g/l, respectively. Pseudomonas sp. EML2 and WFO may be a new candidate and substrate, respectively, for industrial production of PHB.

• Membrane Journal
• /
• v.24 no.6
• /
• pp.417-422
• /
• 2014

The poly(ethylene oxide) (PEO)/Ag Nanoparticles (NPs)/7,7,8,8-Tetracyanoquinodimethane (TCNQ) membrane was fabricated to obtain highly permeable facilitated olefin transport nanocomposite membrane, compared with PEO/Ag NPs/p-Benzoquinone (p-BQ) membrane. Polymer matrix, PEO and silver nanoparticle precursor $AgBF_4$ were fixed at 1 : 0.4 mole ratio and electron acceptor TCNQ content was controlled variously. And the best olefin separation performance was obtained at 1/0.4/0.004 mole ratio, and long-term separation performance was measured at this ratio. As a result, mixed-gas permeance decreased from 23 to 6 GPU, and selectivity decreased from 6 to 2 (propylene/propane) after 32 hours.