• Membrane Journal
• /
• v.18 no.3
• /
• pp.206-213
• /
• 2008

Poly(vinylidene fluoride) (PVDF) membrane surfaces were modified using surface modifying macromolecules (SMMs). The Zonyl BA-L as SMM was used and the various PVDF membranes containing 0 to 2 wt% SMM were prepared. The resulting membranes were characterized through SEM, contact angle measurements and pervaporation separation of water-ethanol system. SMM layers were created in the surface regions of PVDF membranes by SEM images and the contact angles were increased more than untreated PVDF membranes. The pervaporation was carried out at 50, 60 and $70^{\circ}C$, and the PVDF membranes containing 1 and 2 wt% SMM were used for 10, 20, 50 wt% water in the binary water/ethanol mixtures and pure water. PVDF/2 wt% Zrlnyl BA-L membrane showed the permeability 5.3 $g/m^2hr$ and separation factor 287 at $50^{\circ}C$ for water : ethanol = 10 : 50 solution.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.3
• /
• pp.577-592
• /
• 2023

In this study, nanofiber-based textile sensors were developed for motion detection and monitoring. Poly(vinylidene fluoride) (PVDF) nanofibers containing zinc oxide (ZnO) nanoparticles and silver nanowires (AgNW) were fabricated using electrospinning. PVDF was chosen as a piezoelectric polymer, zinc oxide as a piezoelectric ceramic, and AgNW as a metal to improve electric conductivity. The PVDF/ZnO/AgNW nanocomposite fibers were used to develop a textile sensor, which was then incorporated into an elbow band to develop a wearable smart band. Changes in the output voltage and peak-to-peak voltage (V_p-p) generated by the joint's flexion and extension were investigated using a dummy elbow. The β-phase crystallinity of pure PVDF nanofibers was 58% when analyzed using Fourier transform infrared spectroscopy; however, the β-phase crystallinity increased to 70% in PVDF nanofibers containing ZnO and to 78% in PVDF nanocomposite fibers containing both ZnO and AgNW. The textile sensor's output voltage values varied with joint-bending angle; upon increasing the joint angle from 45° to 90° to 150°, the V_p-p value increased from 0.321 V_p-p to 0.542 V_p-p to 0.660 V_p-p respectively. This suggests that the textile sensor can be used to detect and monitor body movements.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.109-112
• /
• 1996

The purpose of this study is to research and develop solid polymer electrolyte(SPE) for all-stolid-state lithium battery. We investigated conductivity, electrochemical properites and impedence spectroscopy of poly(ethylene oxide)[PEO]/poly(vinylidene fluoride)[PVOF] blend electrolytes and charge/discharge cycling of LiCoO$_2$/SPE/Li cell. By adding PVDF and plasticizer to PEO-LICIO$_4$electrolyte, its condustivity was higher than that of PEO-LiCIO$_4$electrolyte. Also PEO$_4$PVDF$_4$LiClO$_4$PC$_{5}$EC$_{5}$ remains stable up to 4.4V vs Li/Li. The discharge capacity of the LiCoO$_2$composite cathode was 92mAh/g based on LiCoO$_2$.EX>.

• Membrane and Water Treatment
• /
• v.10 no.4
• /
• pp.251-257
• /
• 2019

Fabricating hydrophobic porous membrane is important for exploring the applications of membrane distillation (MD). In the present paper, poly(vinylidene fluoride) (PVDF) hollow fiber membrane was modified by coating polydimethylsiloxane (PDMS) on its surface. The effects of PDMS concentration, cross-linking temperature and cross-linking time on the performance of the composite membranes in a vacuum membrane distillation (VMD) process were investigated. It was found that the hydrophobicity and the VMD performance of the PVDF hollow fiber membrane were obviously improved by coating PDMS. The optimal PDMS concentration, cross-linking temperature and cross-linking time were 0.5 wt%, $80^{\circ}C$, and 9 hr, respectively.

• Macromolecular Research
• /
• v.11 no.1
• /
• pp.9-13
• /
• 2003

Poly (vinylidene fluoride) (PVDF) samples were implanted by using high energy (MeV)F$^{2+}$ and Cl$^{2+}$ ions. We observed that AC dielectric constant of the ion-implanted PVDF samples decreased from 10.5 to 2.5 at 1 kHz as the ion dosage increased from 10$^{11}$ to 3 $\times$ 10$^{14}$ ions/$\textrm{cm}^2$. From differential scanning calorimetry experiments, we observed that PVDF samples become more disordered state through the ion implantation. The decrease of the number of bonding of C-H and C-F and the increase of unsaturated bonding were observed from X-ray photoelectron spectroscopy experiments. The emission of HF and H$_2$ molecules during the ion implantation was detected by residual gas analyzer spectrum. Based upon the results, we analyzed that the low AC dielectric constant of the MeV ion-implanted PVDF samples originated from the reduction of polarization due to the structural change of the CF$_2$ molecules in the MeV ion-implanted PVDF samples.les.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.380-382
• /
• 1989

Dielectric breakdown strength (Eb) of thin Poly(Vinylidene Fluoride ; PVDF) film is studied in the temperature range between 4.2 K and 400 K. The results of this study can be summerized as follows. 1) Temperature dependence of dielectric breakdown strength (Eb) can be devided into high and low temperature regions. The critical temperature (Tc) at which two regions are devided depends on applied voltage. 2) Dielectric breakdown strength (Eb) by pulse voltage is higher than that by DC voltage. Especially this difference is remarkable at low temperature.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.7-8
• /
• 2003

Since PVDF/poly(1,4-butylene adipate) blend shows much lower LCST curve compared with PVDF/PMMA blend, the PVDF/PBA blend can be a good candidate for investigating the effect of the electric field on the phase separation and dissolution behavior of an electro-active polymer and electro-inactive polymer blend. (omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.319-320
• /
• 2003

압전성과 초전성을 나타내는 고분자인 poly(vinylidene fluoride)(PVDF)는 poly(methyl methacrylate), poly(vinyl acetate), 및 Poly(vinyl methyl ketone)(PVMK) 등과 블렌딩하면 혼화성(miscibility)이 있다. 이들 블렌드물들을 용융온도 이상으로 승온시키면 낮은 온도에서는 균일상으로 존재하지만, 온도가 계속 증가하면 상분리되어 LCST(lower critical solution temperature)를 나타낸다[1]. 이러한 승온에 의한 상분리 거동에서 외부전장을 가하면 전기활성 고분자인 PVDF에 영향을 주어 상분리 거동이 변화될 것으로 예산된다. (중략)

• Membrane Journal
• /
• v.23 no.5
• /
• pp.360-366
• /
• 2013

The Poly (vinylidene fluoride) and poly (acrylonitrile) (PAN) hollow fiber composite membranes coated with poly (vinyl alcohol) (PVA) and poly (acrylic acid) (PAA) as the crosslinkig agent are prepared. The resulting membranes were characterized for aqueous 90 wt% ethanol solution by pervaporation techniques in terms of the permeability and separation factor. In general, as both the crsslinking reaction temperature and the crosslinking agent concentration increase, the permeability decrease while the separation factor tends to increase. And also the permeability increased and the separation factor decreased as the feed temperature increased. Typically, the permeability $502g/m^2hr$ at the feed temperature $70^{\circ}C$ was obtained for PVDF hollow fiber membrane prepared with the crosslinking agent PAA 3 wt% at the reaction temperature $60^{\circ}C$ whereas the separation factor 218 was shown for the membrane reacted with PAA 11 wt% and at $100^{\circ}C$ for the feed temperature $50^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1190-1192
• /
• 1995

Poly(vinylidene fluoride)(PVDF) is one of the most studied polymers in the latest date. The interest in PVDF lies in its remarkable piezoelectric and pyroelectric properties. Also, PVDF has at least four known crystalline structures(; they are referred to as the ${\alpha},\;{\beta},\;{\gamma}\;and\;{\alpha}_p$ phase or forms II, I, III and $IV_p$). In this study, the manufactured PVDF thin film through vapor deposition method had form II(; the glass at $70^{\circ}C$). This thin film was investigated by x-ray diffraction(XRD), Fourier Transform Infrared(FT-IR) spectroscopy and Differential Thermal Analysis(DTA). XRD and FT-IR indicate crystallization forms from the glass at $70^{\circ}C$ into form II.