• Journal of Energy Engineering
• /
• v.20 no.3
• /
• pp.171-177
• /
• 2011

PVA/GLA/$Al_2O_3{\cdot}3SiO_2$ composite membranes were prepared through the reaction polyvinyl alcohol (PVA) with glutaraldehyde (GLA) as a cross-linking agent and subsequently adding aluminum silicate ($Al_2O_3{\cdot}3SiO_2$) as an inorganic material. The water uptake decreased as the GDL contents increased due to cross-linking process of PVA with GDL, and the ion conductivity increased as the $Al_2O_3{\cdot}3SiO_2$ contents increased in PVA/GLA/$Al_2O_3{\cdot}3SiO_2$ composite membranes. The cross-linking structure of the polymers was confirmed using IR and the tendency of water uptake. The thermal analysis of the copolymers was carried out by TGA. TGA results showed that PVA/GLA composite membrane were more heat-resistant than PVA due to the cross-linking of PVA, and the heat stability of the composite membranes improved much more as the concentration of $Al_2O_3{\cdot}3SiO_2$ increased. Membranes prepared in this study seem to be have thermal stability and increase a tendency of the cation conductivity up to $60^{\circ}C$, but to be exhibit lower performance tendency at over $90^{\circ}C$. Therefore, it is necessary to do more aggressive effort to explore the possibility of application as an ion-conductive composite electrolyte.

• Membrane and Water Treatment
• /
• v.10 no.3
• /
• pp.245-250
• /
• 2019

Prussian blue (PB) is well known for its excellent $Cs^+$ ions adsorption capacity. Due to the high dispersibility of PB in aqueous phase, composite materials imbedding PB in supporting materials have been introduced as a solution. However, building PB particles inside porous supporting materials is still difficult, as PB particles are not fully formed and elute out to water. In this study, we suggest layer-by-layer (LBL) assembly to provide better immobilization of PB on supporting materials of poly vinyl alcohol sponge (PVA) and cellulose filter (CF). Three different PB attachment methods, ex-situ/in-situ/LBL assembly, were evaluated using PB leaching test as well as $Cs^+$ adsorption test. Changes of surface functionality and morphology during PB composite preparation protocols were monitored through Fourier transform infrared spectroscopy and scanning electron microscopy. The results indicate that LBL assembly led to better PB attachment on supporting materials, bringing less eluting PB particles in aqueous phase compared to other synthesis methodologies, such as ex-situ and in-situ synthesis. By enhancing the stability of the adsorbent, adsorption capacity of PVA-PB with LBL improved nine times and that of CF-PB improved over 20 times. Therefore, the results suggest that LBL assembly offers a better orientation for growing PB particles on porous supporting materials.

• Journal of the Korea Concrete Institute
• /
• v.16 no.3 s.81
• /
• pp.391-396
• /
• 2004

Plastic shrinkage crack occurs at the exposed surfaces of freshly placed concrete due to consolidation of the concrete mass and rapid evaporation of water from the surface. This so-called shrinkage crack is a major concern for concrete, especially for flat structures such as pavements, slabs for industrial factories and retaining walls. This study has been performed to obtain the plastic shrinkage and the permeability of hydrophilic poly vinyl alcohol(PVA) fiber reinforced mortar and concrete. Test results indicated that PVA fiber reinforced cement composite showed an ability to reduce the total crack area and the maximum crack width (as compared to plain and polypropylene fiber reinforced concrete). Also, according to the permeability test result, it was found that PVA fiber reinforced cement composite was more reducing than polypropylene fiber reinforced cement composite.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.1
• /
• pp.9-15
• /
• 2017

To identify applicability for packaging material of polyvinyl alcohol (PVA)/boric acid (BA) coating solution with highly-enhanced water vapor and oxygen barrier properties, the PET/PVA-BA/OPP multi-layer films were prepared through comma coating and lamination process. The oxygen and water vapor permeabilities, and tensile strength of as-prepared multi-layer films were investigated before and after pressure cooker test (PCT). Although oxygen and water vapor permeabilites, and mechanical properties of PET/PVA-BA/OPP multi-layer films was decreased after PCT, their properties were highly enhanced as increase of BA contents in PVA matrix. This is strongly related with enhanced cross-linking density in PVA-BA layer. In storage test of seasoned-laver, the PET/PVA-BA/OPP multi-layer films were comparatively effective to suppress the increase in peroxide value originating from oxidation of seasoned-laver. Comparing the commercially available PP/Al-metallized PP for seasoned-laver packaging, however, PET/PVA-BA/OPP multi-layer films did not show any advantage in water activity. This is due to higher water vapor permeation properties of as-prepared multi-layer films. Therefore, further studies are required to enhance the water vapor permeation in PET/PVA-BA/OPP multi-layer films.

• Membrane Journal
• /
• v.9 no.3
• /
• pp.157-162
• /
• 1999

In the crosslining reaction of poly(vinyl alcohoJ)(PVA) with sulfur-succinic acid which had been established in our previous work, reaction temperature, 15$0^{\circ}C$, was so high to collapse the pore struc¬tures in support membrane for the preparation of composite membrane. Therefore, the efforts have been focused on lowering of the reaction temperature to 100$^{\circ}$C by using a catalysis, HC!. The newly established crosslinking reaction was characterized through the analysis of the chemical and thermal properties. From these results, the optimum conditions for the membrane preparation couId be drawn as followings : (i) reac¬tion temperature, 100 $^{\circ}C$,(ii) reaction time, 90 min, (iii) the concentration of the catalysis (HCD, 1.5%. Com¬posite membranes were fabricated by coating a casting solution containing PYA, sulfur-succinic acid and HCl on a support membrane followed by crosslinking it at 10$0^{\circ}C$. The resulting membranes were applied to the pervaporation separation of methyl-tert-butyl ether(MTBE)/methanol (MeOH) mixtures at 30, 40, and 5O$^{\circ}C$. The flux of 5.09 g/$m^2$hr at 5O$^{\circ}C$ and the highest separation factor of 1622 were obtained, respectively.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.496-503
• /
• 1992

An ISFET urea sensor was fabricated by immobilizing the urease using photosensitive polymer, poly(vinyl alcohol)-SbQ on the H$^+$ sensing $Si_3$$N_4$ thin film of pH-ISFET. The sensor could determine the urea concentration in the range of 1∼50 mg/dl with fast response and good repeatability. For its application to clinical analysis, the interferences of the various materials which cause inhibition in urease catalytic reactions in blood was investigated. The results of the urea measurements in blood plasma using the ISFET urea sensor were compared with these of conventional spectrophotometric method.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.246-250
• /
• 2008

Colloidal stability of the biodegradable nanoparticle was characterized by measuring the variation of particle size with time using photon correlation spectroscopy. Three kinds of polymers, namely, poly(D,L-lactide-co-glycolide)(PLGA), PLGA/poly(L-lactide) blends, and PLGA/poly(L-lactide)-g-poly(ethylene glycol) blends were used as matrix material for nanoparticle preparation. Nanoparticles were prepared with or without using poly(vinyl alcohol)(PVA) as suspension stabilizer to evaluate the condition of preparation. Nanoparticles from the blend of amphiphilic graft copolymer with short poly(ethylene glycol) chain and PLGA maintained suspension for 1 day when protein stock solution was introduced. This is somewhat improvement in colloidal stability against protein adsorption compared with that of nanoparticles without PEG moiety. Suspension stabilizer, PVA, had a significant effect on the colloidal stability against freezing and protein adsorption which led to coagulation of nanoparticles. It is important to consider effect of suspension stabilizer as well as materials used to prepare nanoparticle on the colloidal stability.

• Membrane Journal
• /
• v.8 no.4
• /
• pp.235-242
• /
• 1998

Pervaporation separation of methyl tert-butyl ether (MTBE) and methanol (MeOH) mixture, of which the former compound is well known as the octane booster was carried out. Poly(vinyl alcohol) (PVA) membranes crosslinked with poly(acrylic acid) which have been successfully applied on the water-alcohol mixtures were used in this study. The PVA/PAA ratio in the crosslinked membranes was 95/5, 90/10, 85/15, 80/20, and 75/25 by weight. The operating temperatures were 30, 40, and 50$\circ$C, and the compositions of MTBE and MeOH to be separated were 95/5, 90/10, and 80/20 (MTBE/MeOH) solutions. PVA/PAA=85/15 membrane showed the separation factor $\alpha_{MeOH/MTBE}$=4000 and the permeation rate of 10.1 g/m$^2$hr for MTBE/MeOH=80/20 solution at 50$\circ$. When the same membrane was used, the separation factor and permeation rate for MTBE/MeOH=90/10 solution at 40$\circ$C were $\alpha_{MeOH/MTBE}$=6000 and 8.5 g/m$^2$hr, respectively. Also, the hydrophilic/hydrophobic balance of the membranes would take an important role in the relationships between the membranes and separation performances in terms of the flux and the separation factor.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.11
• /
• pp.1297-1308
• /
• 2011

This research investigates the application of ZnO (zinc oxide) nanoparticles and $TiO_2$ (titanium dioxide) nanoparticles to polypropylene nonwoven fabrics via an electrospinning technique for the development of textile materials that can decompose harmful gases. To fabricate uniform ZnO nanocomposite fibers, two types of ZnO nanoparticles were applied. Colloidal $TiO_2$ nanoparticles were chosen to fabricate $TiO_2$ nano- composite fibers. ZnO/poly(vinyl alcohol) (PVA) and $TiO_2$/PVA nanocomposite fibers were electrospun under a variety of conditions that include various feed rates, electric voltages, and capillary diameters. The morphology of electrospun nanocomposite fibers was examined with a field-emission scanning electron micro- scope and a transmission electron microscope. Decomposition efficiency of gaseous materials (formaldehyde, ammonia, toluene, benzene, nitrogen dioxide, sulfur dioxide) by nanocomposite fiber webs with 3wt% nano-particles (ZnO or $TiO_2$) and 7$g/m^2$ web area density was assessed. This study shows that ZnO nanoparticles in colloid were more suitable for fabricating nanocomposite fibers in which nanoparticles are evenly dispersed than in powder. A heat treatment was applied to water-soluble PVA nanofiber webs in order to stabilize the electrospun nanocomposite fibrous structure against dissolution in water. ZnO/PVA and $TiO_2$/PVA nanofiber webs exhibited a range of degradation efficiency for different types of gases. For nitrogen dioxide, the degradation efficiency was 92.2% for ZnO nanocomposite fiber web and 87% for $TiO_2$ nanocomposite fiber web after 20 hours of UV light irradiation. The results indicate that ZnO/PVA and $TiO_2$/PVA nano- composite fiber webs have possible uses in functional textiles that can decompose harmful gases.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.4027-4034
• /
• 2011

$CaCO_3$ crystalline structures having novel assemblies were in situ fabricated as analogs of naturally occurring proteins and polysaccharides for biomineralization. The calcite crystal was mineralized in a poly(vinyl alcohol)-$Ca^{2+}$ complex film immersed in a $Na_2CO_3$ solution containing poly(aspartic acid). The morphology and size of the $CaCO_3$ crystals were tuned by varying the concentration of poly(aspartic acid). The mechanisms of their nucleation orientation and formation were investigated experimentally and through molecular dynamics (MD) simulations in order to obtain a better understanding of the interactions between the polymers and the crystal at the molecular level. Both the MD results and experimental results indicate that the interaction between PVA and calcite mainly depends on the concentration of the polymer. The novel approach proposed herein for the fabrication of inorganic crystalline assembly structures can be used to fabricate precise crystalline structures.