• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.555-555
• /
• 2012

The thermal stability of poly(sodium 4-styrenesulfonate) intercalated graphite oxide has been investigated using a differential scanning calorimeter. The poly(sodium 4-styrenesulfonate) intercalated graphite oxide composite shows a prominent exothermic reaction near $207^{\circ}C$ and an endothermic reaction near $453^{\circ}C$. Graphite oxide is responsible for the exothermic reaction while the endothermic reaction is caused by the poly(sodium 4-styrenesulfonate) used in the synthesis of poly(sodium 4-styrenesulfonate) intercalated graphite oxide. The onset temperature of the exothermic reaction of poly(sodium 4-styrenesulfonate) intercalated graphite oxide decreased by $92^{\circ}C$ in comparison with that of graphite oxide, indicating the addition of poly(sodium 4-styrenesulfonate) in the composite has diminished the thermal stability of graphite oxide.

• Journal of the Korean Chemical Society
• /
• v.39 no.8
• /
• pp.604-610
• /
• 1995

The interaction between 3,3'-dipropyl oxacarbocyanine and poly(styrenesulfonate) has been studied by means of absorption and fluorescence spectroscopic methods. The results was interpreted by stacking model. The kinetic studies of the interaction between 3,3'-dipropyl oxacarbocyanine and poly(styrenesulfonate) were carried out by the absorption and fluorescence spectroscopic stopped-flow methods. The observed relaxation effect in DPC-PSS system was described quantitatively by assuming two relaxation processes. The dependence of rate of reaction on the salt concentration of the solution was also studied. The results are consistent with the two-step mechanism.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.7
• /
• pp.497-502
• /
• 2004

Both ultrasonic velocity at 3 MHz and absorption coefficient in the frequency range of 0.2-2 MHz were measured for poly (sodium 4-styrenesulfonate) aqueous solution over the concentration range of 5 to 25 % by weight. Pulse echo overlap method was employed to measure the ultrasonic velocity over the temperature range of 10-90 ℃ and the high-a ultrasonic resonator method was used for the absorption coefficient measurement at 20 ℃. The velocity exhibited a maximum value at approximately 55. 59, 63. 67, and 71 ℃ in 25, 20. 15, 10. and 5 wt% solutions, respectively. The velocity increased with poly (sodium 4-styrenesulfonate) concentration at a given temperature. The concentrations dependences of the relaxation frequency and amplitude showed that the relaxation around 200 kHz is related to the structural fluctuations of polymer molecules, such as the segmental motions of the polymer chains and that around 1 MHz resulted from the proton transfer reaction of the oxygen sites of SO₃. Both the absorption and the shear viscosity increase with the Polymer concentration. but decrease with temperature.

• Journal of the Korean Chemical Society
• /
• v.42 no.3
• /
• pp.328-330
• /
• 1998

• Journal of the Korean Chemical Society
• /
• v.41 no.3
• /
• pp.170-173
• /
• 1997

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.55-62
• /
• 2011

• Journal of the Korean Electrochemical Society
• /
• v.19 no.4
• /
• pp.129-133
• /
• 2016

In this study, a polymer-carbon composite material is prepared for environmental-friendly organic anode. On poly(styrenesulfonate)(PSS)-carbon composite anode, the carbon is coated by PSS as a core-shell structure and the PSS-carbon composite anode has $524mAh\;g^{-1}$ theoretical capacity with <0.6V voltage. Moreover, the PSS-carbon composite anode shows $519.6mAh\;g^{-1}$, $461.2mAh\;g^{-1}$, $411.8mAh\;g^{-1}$ and $315.9mAh\;g^{-1}$ discharge capacities at 0.1, 0.5, 1 and 10 C, respectively, and stable cycle performance up to 30 cycles. The PSS-carbon composite anode, containing polystyrene and sulfonate functional groups, is suitable for high electrochemical properties organic rechargeable battery.

• Korean Journal of Materials Research
• /
• v.18 no.9
• /
• pp.503-506
• /
• 2008

The effect of silver nanoparticles (NPs) incorporation on the electronic properties of poly (3, 4-ethylenedioxythiphene) : poly(styrenesulfonate) (PEDOT : PSS) films was investigated. The surface of silver NPs was stabilized with trisodium citrate to control the size of silver NPs and prevent their aggregation. We obtained ca. 5 nm sized silver NPs and dispersed NPs in PEDOT : PSS solution. Sheet resistance, surface morphology, bonding state, and work function values of the PEDOT : PSS films were modified by silver NPs incorporation as well as annealing temperature. Sodium in silver NPs solution could lead to a decrease of work function of PEDOT : PSS; however, large content of silver NPs have an effect on the increase in work function, resulting from charge localization on the silver NPs and a decrease in the number of charge-trapping-related defects by chemical bond formation.

• Macromolecular Research
• /
• v.12 no.6
• /
• pp.559-563
• /
• 2004

Both the ultrasonic velocity at 3 MHz and the absorption coefficient in the frequency range from 0.2 to 2 MHz were measured for aqueous solutions of poly(sodium 4-styrenesulfonate) over the concentration range from 5 to $25\%$ (by weight). The pulse echo overlap method was employed to measure the ultrasonic velocity over the temperature range from 10 to $90^{\circ}C;$ the high-Q ultrasonic resonator method was used for the measurement of the absorption coefficient at $20^{\circ}C.$ The velocities exhibited their maximum values at ca. 55, 59, 63, 67, and $71^{\circ}C.$ for the 25, 20, 15, 10, and $5\%$ solutions, respectively. The velocity increased with respect to the poly(sodium 4-styrene-sulfonate) concentration at a given temperature. A study of the concentration dependence of the both the relaxation frequency and amplitude indicated that the relaxation at ca. 200 kHz is related to structural fluctuations of the polymer molecules, such as the segmental motions of the polymer chains and that the relaxation at ca. 1 MHz resulted from the proton transfer reactions of the oxygen sites of $SO_3.$ Both the absorption and the shear viscosity increase upon increasing the polymer concentration, but they decrease upon increasing the temperature.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.137.2-137.2
• /
• 2011

Poly (sodium 4-styrenesulfonate) (PSS) is ionomer based on polystyrene that is electrical conductivity and isoviscosity. LiFePO4 has been a promising electrode material however its poor conductivity limits practical application. To enhance the electronic conductivity of LiFePO4, in this study we prepared LiFePO4- PSS composite by the hydrothermal method. LiFePO4 was heated at $170^{\circ}C$ for 12h and then different wt% PSS (0%, 2.91%, 4.75%, 7.36%, 10%) are added to LiFePO4 and milled at 300rpm for 10h. And then the obtained powders were subsequently heated at $500^{\circ}C$ for 1h under argon flow. The cathode electrode were made from mixtures of LiFePO4-PSS: SP-270- PVDF in a weighting ratio 75%: 25%:5%. The electrochemical properties of LiFePO4- PSS/Li batteries were analyzed by cyclic voltammetry and charge/discharge tests. LiFePO4-C/Li battery with 4.75 wt% PSS displays discharge capacity of 128 mAh g-1 at room temperature that is considerably higher than pure LiFePO4/Li battery ( 113.48 mAhg-1).