• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.276-286
• /
• 2013

This study was performed to investigate the contents characteristics of hazardous oil wastes and wastes of liquid fuels from different industrial process. In order to establish a hazardous waste list, samples of various industrial discharge have been analyzed for 16 non-regulated inorganic hazardous substances (i.e., Cu, Pb, Cd, CN, Hg, As, T-Cr, $Cr^{6+}$, Sb, Ni, F, V, Ba, Zn, Be, Se). In more detail, hazardous waste samples including waste hydraulic oils, waste engine, gear and lubricating oils, waste insulating and heat transmission oils, bilge oils, oil/water separator contents processing were collected from 37 workplaces and analyzed. We observed that the most of the inorganic substances exceeded the proposed criteria in many samples. Especially the concentration of Sb in heat transmission oil, bilge oil and gear & lubricating oils were ranged from 6 to 419 mg/kg whereas the proposed criteria is 50 mg/kg. The assessment result of hazardous waste in Korea according to the EWC showed that the out of 24 processes, 16 belongs to absolute entry and 8 belongs to mirror entry. In conclusion, we expect the outcome of this study to align the classification system of hazardous waste management in South Korea with international legislations, and consequently contribute to reduce environmental pollution as well as health risks by toxic wastes.

• Environmental Analysis Health and Toxicology
• /
• v.14 no.4
• /
• pp.189-201
• /
• 1999

Lead (Pb) is ubiquitous in the urban environment and is a well-known toxic element. It may cause adverse health effects on hematopoietic system, peripheral and central nervous systems, kidney functions, and others. In recent decades, lead concentration in blood has been widely used one of indicators for lead exposure and risk evaluation. In this study, we determined the blood-lead levels in general populations of Korea, and investigated the relationship among blood-lead levels, sociobehavioral factors, and lead concentrations in the contacted environments such as ambient air, drinking water, and foods. The study subjects consisted of volunteers who had lived in the residential or industrial area in Korea. Information about gender, age, living area, occupation, smoking, heat system, and dietary habits, etc was collected using a self-reported questionnaires. The lead concentrations of environments were collected by literature search to the study area. Participated subjects in industrial area were 726 and their blood-lead levels were 8.58 $\mu\textrm{g}$/dl for males and 6.26 $\mu\textrm{g}$/dl for female in average. The other subjects in residential area were 317 and their blood-lead levels were 4.58 $\mu\textrm{g}$/dl for males and 3.49 $\mu\textrm{g}$/dl for female in average. The distribution of blood-lead level in the industrial subjects was well fitted to the log -normal distribution and that in the residential subjects was well fitted to the normal distribution. Blood-lead levels in both area were affected by gender, smoking habit, age and residence duration except age in industrial area and residence duration in residential area. It was identified that 30% of blood-lead level was contributed from the inhalation of ambient air in the industrial area, and 8.4% of blood-lead level was from that in the residential area. from this study, it would be suggested for the health risk assessment and management of lead pollution concerns in urban, industrial and rural areas.

• Environmental Analysis Health and Toxicology
• /
• v.28
• /
• pp.7.1-7.9
• /
• 2013

Objectives We investigated the particle mass size distribution and chemical properties of air pollution particulate matter (PM) in the urban area and its capacity to induce cytotoxicity in human bronchial epithelial (BEAS-2B) cells. Methods To characterize the mass size distributions and chemical concentrations associated with urban PM, PM samples were collected by a 10-stage Micro-Orifice Uniform Deposit Impactor close to nearby traffic in an urban area from December 2007 to December 2009. PM samples for in vitro cytotoxicity testing were collected by a mini-volume air sampler with $PM_{10}$ and $PM_{2.5}$ inlets. Results The PM size distributions were bi-modal, peaking at 0.18 to 0.32 and 1.8 to $3.2{\mu}m$. The mass concentrations of the metals in fine particles (0.1 to $1.8{\mu}m$) accounted for 45.6 to 80.4% of the mass concentrations of metals in $PM_{10}$. The mass proportions of fine particles of the pollutants related to traffic emission, lead (80.4%), cadmium (69.0%), and chromium (63.8%) were higher than those of other metals. Iron was the dominant transition metal in the particles, accounting for 64.3% of the $PM_{10}$ mass in all the samples. We observed PM concentration-dependent cytotoxic effects on BEAS-2B cells. Conclusions We found that exposure to $PM_{2.5}$ and $PM_{10}$ from a nearby traffic area induced significant increases in protein expression of inflammatory cytokines (IL-6 and IL-8). The cell death rate and release of cytokines in response to the $PM_{2.5}$ treatment were higher than those with $PM_{10}$. The combined results support the hypothesis that ultrafine particles from vehicular sources can induce inflammatory responses related to environmental respiratory injury.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.8
• /
• pp.459-467
• /
• 2016

In order to assess the pollution status and distribution characteristics of PM and PM-bound species, PM10 samples were collected using mini-volume air sampler at the subway cabin in Daejeon city. Measurements of about 24 elements including toxic metals (e.g., As, Cr, Mn, V, Zn) in PM10 were made by instrumental neutron activation analysis and X-ray fluorescence. The average PM10 concentration was $59.3{\pm}14.5{\mu}g/m^3$ in the subway cabin with a range of 42.2 to $97.4{\mu}g/m^3$, while the associated elemental concentrations were varied in the range of $10^{-3}$ to $10^5ng/m^3$. It was found that the concentration of Fe ($12.5{\mu}g/m^3$) was substantially higher than any other element. The Fe concentration was apportioned by about 20% of the PM10 concentration. The results of factor analysis indicate that there are no more than six sources in the cabin (e.g., brake-nonferrous metal particle, resuspended rail dust, fuel combustion, vehicle exhaust, black carbon, Cr-related).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.839-846
• /
• 2016

Since oil leakage is one of the most common nonpoint pollution sources that contaminate soil in Korea, the capacity of soil microbial community for degrading petroleum hydrocarbons should be considered to assess the functional value of soil resource. However, conventional methods (e.g., microcosm experiments) to assess the remediation capacity of soil microbial community are costly and time-consuming to cover large area. The present study suggests a new approach to assess the toluene remediation capacity of soil microbial community using a microbial diversity index, which is a simpler detection method than measuring degradation rate. The results showed that Shannon index of microbial community were correlated with specific degradation rate ($V_{max}$), a degradation factor. Subsequently, a correlation equation was generated and applied to Michaelis-Menten kinetics. These results will be useful to conveniently assess the remediation capacity of soil microbial community and can be widely applied to diverse engineering fields including environment-friendly construction engineering fields.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3289-3293
• /
• 2014

Femtosecond laser ablation (fs LA) was used in this study to identify pollution by heavy metals and the distribution of elemental nutrients at different rice milling ratios. Polished rice (degrees of milling of 3, 5, 7, 9, and 11) was collected from major Korean supermarkets and one sample thereof was selected. An internal quality control experiment was conducted using a rice flour certified reference material from the Korea Research Institute of Standards and Science (KRISS CRM) for the evaluation of the efficacy. To assess the effectiveness of the analysis method, the reliability was validated using a food analysis performance assessment scheme (FAPAS), with chili powder serving as an external quality control. The results of the analysis of the inorganic elements Ti, Ca, Al, Fe and Mn in white and brown rice with degrees of milling of 3, 5, 7, 9 and 11 using ICP-MS, ICP-OES and AAS revealed contents of 0.40, 49.2, 2.43, 5.36 and 10.3 mg/kg in white rice and 0.59, 78.0, 7.52, 11.0 and 18.5 mg/kg in brown rice, respectively. Among the elements, there were remarkable differences in the measured contents. By comparing the contents of the elements at different degrees of milling, Ti, Co, As, Ca, Al, Cu, Fe, and Mn were determined to be distributed on the surface of the rice grains, whereas the contents of Cd and Pb increased toward the center of the rice grains, and Si was evenly distributed. After the quantitative analysis of rice samples polished to different degrees of milling, Ca and Al, which were contained in large amounts, and Si were analyzed with specificity by fs LA. The results show that Ca and Al were distributed in the rice husk (protective covering of rice) and Si was distributed in all parts of the rice.

• Journal of the Korea Concrete Institute
• /
• v.25 no.1
• /
• pp.115-123
• /
• 2013

The steel industry, a representative industry that significantly consumes raw materials and energy, produces steel as well as a large amount of by-product steel slag through the production process. The vast habitat foundation of marine life has been destroyed due to recent reckless marine development and environment pollution, resulting in intensification of the decline of marine resources, and a solution to this issue is imperative. In order to propose a method to recycle large amounts of by-product slag into a material that can serve as an alternative to natural aggregate, the engineering properties and applicability for each mixing factor of environment friendly porous concrete as a material for the composition of marine ranches were evaluated in this study. The test results for percentage of voids per mixing ratio revealed that the margin of error for all conditions was within 2.5%. The compressive strength test results showed that the most outstanding environmental friendly porous concrete can be manufactured when mixing 30% slag aggregate and 10% specially treated granular fertilizer for the optimum volume fraction. As concrete for marine applications, the best seawater resistance was obtained with mixing conditions for high compression strength. An assessment of the ability to provide a marine life habitat foundation of environmentally friendly porous concrete showed that a greater percentage of voids facilitated implantation and inhabitation of marine life, and the mixing of specially treated granular fertilizer led to active initial implantation and activation of inhabitation. The evaluation of harmfulness to marine life depending on the mixture of slag aggregate and specially treated granular fertilizer revealed that the stability of fish is secured.

• Korean Journal of Environmental Biology
• /
• v.37 no.2
• /
• pp.204-216
• /
• 2019

To evaluate the biological integrity of aquatic ecosystems, we developed Korean multimetric diatom index (KMDI) using metrics that many researchers have been previously described, and compared to single-metric diatom index such as trophic diatom index (TDI) and diatom assemblage index to organic pollution (DAIpo). For the biological and environmental data, we investigated the epilithic diatoms, water quality and the land-use for 923 sites in Korean streams between 2013-2017, and estuaries between 2010-2017, respectively. Five appropriate metrics were selected according to the following steps; 1) extraction of 300 potential metrics (biological, chemical, physical, and geographical) based on previous references, of these, 2) 46 samples having high separation power were selected, 3) the selected metrics were each tested for variability, redundancy, and sensitivity to the environments, finally 4) construction of multi-metric diatom index comprising single type metrics such as TDI, DAIpo, % motile diatoms, % Achnanthes / (Achnanthes+Navicula), and % number of Gomphonema species. The biological integrity of the 233 sites from the Geum River basin were independently investigated using KMDI. Collectively, the new KMDI showed high sensitivity and explanatory power for environmental factors such as land-use, biochemical oxygen demand, total nitrogen, and electric conductivity. However, it had slightly higher biological integrity for the same sites as compared to single type diatom metrics. Finally, more data accumulation from all over Korea and the development of acceptable diatom metrics were required.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5B
• /
• pp.273-285
• /
• 2012

Current TMDL based on the 'Polluter Pays Principle' in Republic of Korea is individually operated by each local government for the designed allocated pollution load of unit watershed and unit district. However, unlike the motion of the air contaminants, the polluted contaminants in a river move from upstream to downstream, and a river can affect to districts more than two. In addition, a decision making on the construction of a sewage treatment facilities follows the concept of 'economy of scale'. These reasons support the collaboration among local governments in order to reduce the costs in improving water quality. This study suggested a method to reduce water quality management cost by redistributing reduction load considering cost-effectiveness for an entire watershed. The assessment on the suggested method is conducted in Youngsan river watershed. Without variation in total load, reduction load assigned for unit watershed and unit district is retributed in the region where pollutant source is concentrated, and then water quality and cost reduction improved from the redistribution of reduction load is analyzed. The results show that the cost saved by the suggested method is KRW 124 billion for scenario-1 and 172 billion for scenario-2 considering total cost of KRW 788 billion for the existing plan. We expect that the suggested method is a good example to reduce water quality management cost in local governments for TMDL.

• Korean Journal of Community Nutrition
• /
• v.13 no.1
• /
• pp.80-90
• /
• 2008

Atopic dennatitis (AD) is one of the major public health problem. It has been reported that the prevalence of AD in children and adults are 10-20% and 1-3%, respectively. Westernization of food habits, urbanization, and environmental pollution are contributing factors toward the recent rise in prevalence. Excessive dietary restriction leads to chronic malnutrition in atopic dermatitis patients. The purpose of this study was to investigate the effects of medical nutrition therapy (MNT) on quality of diet and blood immune parameters in atopic dermatitis patients. The 19 atopic dermatitis patients (7 men and 12 women) admitted to K University Medical Center were studied. During the 12 weeks of intervention, the subjects were given MNT by a dietitian for 30-45 minutes every other week. MNT was comprised with general dietary therapy, intake of balanced meals, emphasis on n-3 fatty acid contents in foods, and food allergies. Anthropometric and dietary assessment and blood analysis were taken at baseline and after 12 weeks of MNT. After 12 weeks of MNT, the subjects' dietary qualities, including dietary diversity score (DDS), meal balance score (MBS) and dietary variety score (DVS) were significantly increased (p < 0.05). According to significantly increased intake of EPA and DHA, dietary n-6/n-3 fatty acid ratio decreased to the recommended level for the atopic dermatitis patients (p < 0.05). These changes of dietary fatty acid consumption were reflected erythrocyte fatty acid composition. After 12 weeks of MNT, serum levels of IgE and IL-4 levels were significantly decreased, however, the levers of INF-$\{gamma}$, WBC, lymphocyte and TLC were not changed. As a conclusion, the individualized MNT improved the quality of diet in atopic dermatitis patients thereby influenced RBC fatty acid composition and IgE and IL-4 levels.