• Journal of ILASS-Korea
• /
• v.5 no.2
• /
• pp.53-60
• /
• 2000

An aerodynamically progressed model, which is called APTAB model. has been proposed for more accurate prediction of the deformation and breakup of a spray. Especially, the effects of the droplet deformation on the droplet aerodynamic external force are considered in this model, which was neglected in TAB model. It is found that the predicted droplet deformation using APTAB model shows better agreement with experimental data than those of other models for the droplets in both bag-type and shear-type breakup regimes. A new breakup criterion has been proposed to predict more reasonable breakup quantities, such as breakup deformation length, time and so on; i.e., it is defined that the breakup occurs when the internal liquid phase pressure of the deformed droplet at the equator is greater than that of the pole. The proposed breakup criterion shows more physical relationship between the degree of droplet deformation at breakup and the corresponding breakup Weber number as compared with the results with TAB and DDB models. Therefore, it provides better predictions of the experimental data than TAB and DDB models for the droplet deformation and time in both bag-type and shear-type breakup regimes.

• Journal of ILASS-Korea
• /
• v.14 no.4
• /
• pp.171-177
• /
• 2009

This study proposes a new stratified charge system for low emission and ultra lean burn. In order to examine combustion characteristics of the new system, sparkplug with a hole at positive pole and a common CNG injector for injecting fuel were used in this study as injector-type spark plug. The new stratified charge system injects fuel of extremely small quantities and ignites mixture around sparkplug gap. Also, the system was fitted in a visualized constant volume chamber. Then, for analysis of the combustion characteristics, we examined combustion pressure, lean inflammable limit, and visualized combustion flame according to equivalence ratio by comparison with homogeneous charge (HC) method and the new stratified charge (SC) method. As results of this study, in the case of using this system, the propagation speed of initial flame was increased and total combustion period was reduced in the ultra lean burn in the same equivalence ratio. These phenomena occurred clearly under the conditions of lean equivalence ratio. Furthermore, the lean inflammable limit of mixture was extended by using the injector-type spark plug.

• Korean Journal of Plant Taxonomy
• /
• v.49 no.2
• /
• pp.101-106
• /
• 2019

A pollen morphological study was conducted using light and scanning electron microscopy involving six species belonging to the subtribe Neoguillauminiinae. Pollen samples from the six species are tricolporate, and the colpi are surrounded by broad margo, with the widest width in the equator, narrower toward the pole, and rounded at the end. Based on the pollen morphology, pollen of the species in the subtribe Neoguillauminiinae were divided into four types: the Neoguillauminia type (T1), the C. collinus type (T2), the C. casuarinoides type (T3) and the C. paucifolius type (T4). The generic divergence between Neoguillauminia and Calycopeplus was supported by the pollen characters of the size, amb and lumina shape. In particular, the traits of rounded shape in the outline of the polar view and circular lumina, which appear only in the pollen grains of N. cleopatra, support the recognition of Neoguillauminia as a monotypic genus. Calycopeplus oligandrus and C. paucifolius had the same reticulate pattern of pollen grains, supporting Forster's hypothesis that these two species are closely related. On the other hand, the close relationship between the morphologically similar C. collinus and C. casuarinoides was not supported by the pollen characters. Within the subtribe there are two equally parsimonious hypotheses regarding the evolution of exine characters. The first consists of two changes of microreticulate through parallel evolution from the primitive reticulate exine, and the second is that the microreticulate pattern is differentiated from the reticulate state and then reversed to reticulate pollen grains.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.2
• /
• pp.180-195
• /
• 1991

In this paper, we studied on new method of recognition using structural information to recognize character pattern in orginal shape of Hangeul. First, for the purpose of knowing location of character in input image. it processed Making block. Second, after we investigated. whether vertical vowel exited or not in character image accordingly the center of gravity of Hangeul. each character was classified into Type of Hangeul by searching location and length for horizontal vowel and short pole. Last, we processed it by means of template matching which calculate Uclid's distance on each Jaso in accordance to type classified. This paper made an experiment on 2350 characters and obtained 98.3% classifing rate and 95.2% recognizing rate.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.8
• /
• pp.654-659
• /
• 2008

This paper is to suggest a concept design of the permanent magnet type magnetic resonance imaging (MRI) device based on the parameter optimization method. Pulse currents in the gradient coils will introduce the effect of eddy currents in the ferromagnetic material, which will worsen the quality of imaging. In order to equalize the magnetic flux in the MRI device for good imaging, the eddy current effect in the ferromagnetic material must be taken into account. This study attempts to use the design of experiment (DOE) and the response surface method (RSM) for equalizing the magnetic flux of the permanent magnet type MRI device using that the magnetic flux can be calculated directly using a commercial finite element analysis package. As a result, optimal shapes of the pole and the yoke of the PM type MRI device can be obtained. The commercial package, ANSYS, is used for analyzing the magnetic field problem and obtaining the resultant magnetic flux.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.58-62
• /
• 1999

We fabricated a new hairpin type HTS 2-pole microstrip Bandpass filter to operate at 5.8GHz. The fabrication method was pulsed laser deposition and YBCO films were deposited on ${\alpha}$-A1$_2O_3$ substrates with a CeO$_2$ thin layer as a buffer layer. We developed a new style hairpin type filter by using interdigitide innerpole. Compared to the saute size regular hairpin type filters, our filter had a lower center frequency, bandwidth and loss by an amount of 14.5%, 29.6%, 0.5488dB, respectively. The size of the filters were 13.7${\times}$3.3mm. We did simulations on the several types of band pass filters by using HFSS and serenade. We measured growth rate and Tc of YBCO films grown on CeO$_2$/ ${\alpha}$-A1$_2O_3$ substrates which were rotated while growing films.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.3
• /
• pp.131-137
• /
• 2000

2 phase 8 pole HB-type(flat-type) Linear Pulse Motor can be used as the high precision position actuator because of its many advantages (simple control circuit, high stiffness characteristics, etc). Also, using the microstep drive, its noise and vibration can be reduced considerably and positional resolution may be increased further. But, $20^{\circ}$tapered tooth shape to reduce the normal force have an much effect on the static thrust force characteristics. And, because of hybrid-type LPM, interaction between the permanent magnet and the excitation current have an effect on the various characteristics of LPM. Hence, in this paper, the effect of tooth shape on static thrust force characteristics was analyzed using the air gap permeance by finite element method. For analyzing the effect of unbalance between the m.m.f of permanent magnet and the m.m.f of excitation current, unbalanced m.m.f coefficient $\sigma$ were introduced with the permenace matrix and switching matrix.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1285-1293
• /
• 2018

This paper proposes a new type of consequent-pole permanent-magnet (CPPM) machine with stator axial magnetic ring that increases torque capability over a wide speed range and enhances efficiency for the built-in rare-earth permanent magnet synchronous machine used in new energy vehicles. The excitation winding of the CPPM hybrid excitation synchronous machine in the stator is replaced by ferrite magnetic ring to simplify the structure and manufacturing process of the machine. The basic structure and magnetic regulation principle of the proposed machine are introduced and compared with the traditional interior rare-earth permanent magnet synchronous machine and CPPM hybrid excitation synchronous machine. Finally, experimental results of a new type of CPPM synchronous motor prototype with axial magnetic ring are introduced in the paper.

• Archives of Plastic Surgery
• /
• v.39 no.6
• /
• pp.601-605
• /
• 2012

Background Cryptotia is a congenital ear deformity in which the upper pole appears buried beneath the mastoid skin. Cryptotia is a common auricular malformation among Asians. The aim of this paper is to examine the surgical techniques for and complications of 34 cryptotic patients. Methods Surgery was performed for 34 cryptotic deformities (January 2005 to January 2012). Twenty-two patients (64.7%) were classified as having type I cryptotia, and 12 patients (37.5%) type II cryptotia. Among the type I cryptotia patients, 8 patients had mild deformity and 14 severe deformity. Among the type II cryptotia patients, 10 patients had mild deformity and 2 severe deformity. Results The mild deformities were corrected via Z-plasty, V-Y plasty, full-thickness skin graft, and transposition flap, while the severe deformities were corrected via cartilage graft or Medporfor the spread of cartilage adhesion of antihelix. There were two cases of reinvagination in the autologous cartilage graft group. Implant exposure occurred with Medpor (two cases). There were two cases of hypertrophic scar on the previous surgical wound with Medpor. There were no complications in the 18 patients who had mild deformities. Conclusions The type I cryptotia patients had more severe deformities than the type II cryptotia patients. As most of the type II cryptotia patients had only mild deformities, their deformities were corrected without using autologous conchal cartilage graft or Medpor, except for two patients. Through more case analyses, researchers should make an effort to identify methods for recurrence and prevention of complication.

• Applied Microscopy
• /
• v.14 no.2
• /
• pp.52-65
• /
• 1984

The ultrastructure of the pars distalis of the adenohypophysis was studied in the female Korean native goat ($10{\sim}16kg$, B.W.) by electron microscopy. Six granular cells and one agranular cell were recognized according to the characteristic patterns of secretory granules and cell organelles. Type I cells were. large, round or oval and contained the largest granules of 290 to 490 nm in diameter, Their endoplasmic reticula were well developed and packed with parallel lamellae close to nuclear membrane. Type II cells were elongate or polygonal. They contained granules of 220 to 390 nm in diameter and well developed Golgi complex. Type III cells were round, oval or angular and contained granules of 150 to 300 nm in diameter. Their endoplasmic reticula were coarsely scattered among the granules and provided an intracellular compartment for segregation in groups. Type IV cells were oval or round and contained granules of 120 to 280 nm in diameter. Their endoplasmic reticula were arranged at one pole of cytoplasm. Type V cells were round or polygonal and contained small granules of 110 to 140 nm in diameter Their endoplasmic reticula were packed with regularly parallel lamellae. Type VI cells were stellate and irregular in shape and had cytoplasmic processes projecting between the neighboring cells. Their granules were less than 130 nm in diameter, the smallest among the cells of the pars distalis. Agranular cells had no granules or a few, if any. They were stellate or irregular in shape.