• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.201-207
• /
• 2017

Objective of this research was to investigate the influence of pre-plant nitrogen levels in root media on plug seedling growth of radish cv. Soksungbommu. To achieve the research purpose, a root medium, the mixture of perlite, coir dust, and peatmoss (volume percentage of 30:35:35) was formulated and the N levels incorporated during mixing were controlled to 0, 100, 250, 500, 750, 1,000, and $1,500mg{\cdot}L^{-1}$. Then, the seeds were sown into 72-cell plug trays in which the root medium was packed. The measurements of growth and analysis of tissue and root media were conducted 2 and 4 weeks after sowing. Elevation of pre-plant N levels raised EC and turned down pH of root media. But, as seedling grew, the pH rose and EC get lowered in all treatments. The EC as well as $NH_4-N$ and $NO_3-N$ concentrations of root media declined gradually until week 2, but those declined sharply between weeks 2 to 4. The seedling growth 2 weeks after sowing showed quadratic response to pre-plant N levels with the highest growth in $250mg{\cdot}L^{-1}$ treatment and lagging growth in the treatments of lower or higher N levels than $250mg{\cdot}L^{-1}$. The seedling growth 4 weeks after sowing showed also quadratic response with the highest growth in $500mg{\cdot}L^{-1}$ treatment. The tissue N contents were get higher and those of K, Ca, and Mg were get lower as pre-plant N levels were elevated. Above results suggest that lower than $250mg{\cdot}L^{-1}$ in pre-plant N levels is optimistic for growth of plug seedling and avoidance of toxic injury in very young stage.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.134-142
• /
• 2019

This study was conducted to evaluate the growth characteristics of lettuce (Lactuca sativa L.) as affected by artificial light sources and different growing media in a closed-type plant production system (CPPS). The lettuce seeds were sown in the 128-cell plug tray filled with 5 different growing media such as urethane sponge (US), rock-wool (RW), Q-plug (QP), TP-S2 (TP) and PU-7B (PU). The germination rate of lettuce seeds was examined during 12 days after sowing. On the 13 days after sowing, the lettuce seedlings were transplanted in a CPPS with temperature $25{\pm}1^{\circ}C$ and nutrient solution (EC $2.0dS{\cdot}m^{-1}$, pH 6.5) using recirculating deep floating technique system. The light sources were set with FL (fluorescent lamps) and combined RB LEDs (red : blue = 7 : 3) with $150{\pm}10{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD and a photoperiod of 14/10 hours (light/dark). The initial germination rate of lettuce was the highest in TP. The final germination and mean daily germination were the significantly highest in RW, QP and TP. The plant height, leaf length, leaf width, leaf area, and fresh and dry weights of shoot were the greatest in QP irradiated with RB LED. The number of leaves, fresh and dry weights of root and SPAD were the greatest in QP and TP irradiated with RB LED. The root length was the longest in TP irradiated with RB LED. Therefore, these results indicate that RB LED was effective for the growth of lettuce and it was also found that the QP and TP were effective for the germination and growth of lettuce in a CPPS. In addition, we confirmed the applicability of the newly developed growing medium TP for the lettuce production in a CPPS.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.483-487
• /
• 2001

This study was carried out to investigate the role of attached leaflet on rooting and growth by one nodal cutting in tomato. As cutting sources 4 to 6 nodes could be obtained from one nursery seedling. Medium for cutting was a mixture with perlite plus peat moss (1 : 1, v/v), and each plug capacity was 30mL in the 72 cells-plug tray. Plant height and the number of leaves were significantly increased by attached leaflet cutting in 'Pepe' and 'Coco' cherry tomato. Dry weights of top and root were increased as much as 3 to 15 times in the cutting attached leaflet. Rooting percentage was 93.5% in one node cutting and 86% in the cutting with hypocotyl node part. At 20 to 24 days after nodal cutting, healthy nursery plant could be produced to transplant in field. The nursery plants by nodal cutting (NPNC) showed more fibrous roots and less tap roots than that of seedling. In terms of rooting pattern, NPNC rooted at the whole ground stem part, while rooting of seedling occurred at basal part of hypocotyl.

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.21-26
• /
• 2011

Differences among cultivars, conditions of nutrient solution, nursing materials, and soilless culture systems were investigated to select suitable cultivar and cultivation methods for stable production of summer spinach in the highlands. The 'Quinto' spinach showed the earliest growth and highest yield. For yield increase of summer spinach, optimal solution pH was 6.0, EC was $2.0dS{\cdot}m^{-1}$, and $NH_4-N$ ratio of nutrient solution was 30 percent Stand rate of spinach in nursing seedlings, at 200-cell-tray filled with mixed nursing soil (peat : perlite = 7 : 3), was higher than those grown in urethane sponge and rock-wool plug. Yield was also 18 to 24 percent higher than those in rock-wool plug and urethane sponge. Plant length and yield of spinach in mixed substrate (peat : perlite = 7 : 3) filled nutrient film technique (MSNFT) system were longer of 18 percent, and higher of 9 percent than those in deep flow technique (DFT) system, respectively. However, changes of root zone temperature, pH and EC showed similar pattern with DFT. Therefore, growing 'Quinto' cultivar at 6.0 of pH, $2.0dS{\cdot}m^{-1}$ of EC, 30 percent of $NH_4-N$ ratio, at 200-cell-tray filled with mixed nursing soil, and MSNFT cultivation system, was the best for production of summer spinach in the highlands.

• Journal of Bio-Environment Control
• /
• v.12 no.3
• /
• pp.139-146
• /
• 2003

This study was conducted to investigate the effects on the over-growth inhibition of fruit vegetables (tomato, cucumber, and hot pepper) seedling by the treatment of triazole-typechemicals and to select the most effective chemicals for the over-growth inhibition, and to investigate suitabla concentration treatment and times of the newly selected chemical. The triazole-type chemicals inhibited stem height more, the more the concentration is increased in any crops. The diniconazole showed the highest dwarfing ration, and the tebuconazole and hexaconazole are also good for dwarfing ratio. The diniconazole decreased the plant height of cucumber, tomato, and hot pepper as the concentration is increased. In cucumber, thc dwarfing ratio was 30% in the 5 mg${\cdot}L^{-1}$ treatment, and was 60% in thc l00 mg${\cdot}L^{-1}$ treatment. In tomato and hot pepper, the dwarfing ratio was 30% in the 25 mg${\cdot}L^{-1}$ treatment in any times. In diniconazole treatment, the cucumber and tomato should have 5 mg${\cdot}L^{-1}$ at the lst growth stage and the hot pepper should have 5 mg${\cdot}L^{-1}$ at the 2nd growth stage to obtain good seedlings.

• Korean Journal of Plant Resources
• /
• v.27 no.2
• /
• pp.174-182
• /
• 2014

This study was carried out to investigated the effects of soil type and light condition on seedling quality of rare and endemic plants Orostachys iwarenge and Orostachys iwarenge for. magnus. The best seedling quality of O. iwarenge and O. iwarenge for. magnus seedling were shown in Klasmann soil at non-shading or LED (Red+Blue) condition, 50% shading or LED (Red+Blue) condition, respectively. Survival of O. iwarenge seedling was not influenced by the period of experiment but survival of O. iwarenge for. magnus seedling in sandy soil conditions decreased significantly. Results of correlation analysis of seedling quality and survival rate, indicated that O. iwarenge showed a correlation of 0.8 or more at plant height, leaf length and fresh weight. O. iwarenge for. magnus showed a correlation of 0.8 or more at plant height, leaf width and leaf length. Especially, seedling survival of O. iwarenge and O. iwarenge for. magnus showed a correlation of 0.8 or more at first seedling survival and second seedling survival. It was important to manage the early seedling stages of O. iwarenge and O. iwarenge for. magnus. Therefore, seedlings with plant height (over 2.5~4 cm) and root length (over 3~5 cm) were grown vigorously at 35 days after the seedling was transplanted in mid-April in Klasmann soil of 72 plug cell tray at LED (Red+Blue) conditions.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.204-204
• /
• 2017

In recent years the growth rates of world agricultural production and crop yields have slowed because of rapid urbanization but the agriculture mechanization implies the use of various power sources and improved farm tools and equipment to enhance the efficiency of utilization of various crop input. Therefore the current study was conducted to investigate the growth characteristics of seedlings treated with plant growth regulators for the production of seeds suitable for mechanical formulations of soybeans and red beans. The seeds of Uram bean and Arary red bean were sown in 128 well plug tray as the testing varieties. Three growth inhibitors such as 0.05% hexaconazole, prohexadion-calcium, and 0.1% diniconazole were treated and fifteen representative plants were collected from each treatment at 2, 5, 7, 13, 16, 17, 19, and 20 days interval after treatment. The collected plants were examined for the growth atributes such as plant height, root length, leaf area and chlorophyll. The growth promoter was treated at the 13th day after treatment with growth inhibitor and treated with 0.1% concentration of Pomina ($GA_{4+7}$ 1.8% + 6-benzylaminopurine 1.8%) and Nonaji (gibberellic acid 2% + $GA_{4+7}$ 2%). Initially the growth data was recorded to examine the effect of growth inhibitor, while after treatment with growth promoters, the growth attributes were recorded at 4th and 7th day. As a result of measuring the growth parameter of soybean, the inhibitory effect was shown in the aerobic treatment at the ground level at the 7th day after treatment. At the 4th day of growth promoting agents treatment, the stimulation effect of non - treated plants was greater than that of formalin treatments. As a result of measuring the growth attributes of red bean, In the latter part of the growth, at the 4th day after the growth promoter treatment. This study was able to confirm the effective growth regulators and treatment periods for each crop, and it was possible to control the growth of seedlings. Based on these results, it can be expected that the basis of seedling production technology of crops which is necessary for sowing and transplantation mechanization of agriculturle field can be established.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.26 no.1
• /
• pp.22-29
• /
• 2024

In this study, we summarized the definition of smart vegetable seedling production technology, analysis of smart seedling production system, a hardware and software configuration model for smart seedling production system, research and development trends in smart seedling production system, and proposed future research and development plans for smart seedling production technology. Smart vegetable seedling production is a data-based seedling production, management, and distribution system that utilizes 4th Industrial Revolution technology to improve seedling productivity and quality. The production of vegetable seedlings using smart seedling production technology can be efficiently managed by collecting, analyzing, and managing information on seedlings, environment, and tasks at each stage of production by linking with the smart seedling integrated management system. However, there is still a lack of standardization of seedling standards and quality for each vegetable crop to establish smart seeding production technology, as well as development of smart seedling production element technology, which requires national wide R&D support.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.461-470
• /
• 2019

This study was carried out to quantify the drought stress in grafted watermelon seedlings non-destructively by using chlorophyll fluorescence (CF) imaging technique rather than the visual judgment. Six-day old watermelon seedlings were grown under uniform irrigation for 3 days, and then given drought stress. Afterward, the sensor for the measurement of water content in plug tray cell unit was used to classify the drought-stress level into nine groups from D1 (53.0%, sufficient moisture state) to D9 (15.7%, extremely dry stress), and the 16 CF parameters were measured. In addition, re-irrigation was performed on the drought stressed seedlings(D5 - D9) to determine the growth and photosynthesis recovery level, which was not confirmed by visual judgment. The kinetic curve patterns of CF in three different drought stressed seedling groups were found to be different for the early detection of drought stress. All the 16 CF parameters decreased continuously with exposure to drought stress and drastically decreased from D5 (32.1%) where the visual judgment was possible. The fluorescence decline ratio (Rfd_Lss) started to decrease from the initial drought stress level (D5 - D6), and the Maximum PSII quantum yield (Fv/Fm) was significantly decreased in the later extreme drought stress range (D7 - D9) by re-irrigation recovery test. Thus, Rfd_Lss and Fv/Fm parameters were finally selected as potent indicators of growth and photosynthesis recovery in the initial and later stages of drought stress. Also, to the differences in the numerical values of the individual chlorophyll fluorescence parameters, the drought stress level was intuitively confirmed through the image. These results indicate that Rfd and Fv/Fm can be considered as potential CF parameters for the detection of low and extremely high drought stress, respectively. Furthermore, Fv/Fm can be considered as the best CF parameters for recovery at re-irrigation.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.128-128
• /
• 2017

현재 식물공장에서 사용되고 있는 이식장치는 핀을 이용하여 육묘트레이 위에서 플러그묘를 뽑아 육묘트레이 또는 포트로 옮겨 심는 방식을 채택하고 있다. 이러한 이식 방식은 셀과 셀 사이에 있는 다른 묘의 잎을 파지함으로써 묘를 2개 이상 취출하는 현상이라든지 핀에 의한 잎 손상 등이 우려되고 있어 이에 대한 개선책이 필요하다. 본 연구는 플러그묘의 이식작업 시 잎 손상을 줄이면서 기계 적응성을 향상시킬 수 있는 이식시스템을 개발하기 위해 진공흡인을 이용한 이식 메커니즘에 대해 검토하였다. 플러그묘 이식시스템은 육묘트레이 셀을 X-Y로 옮기는 묘 이송부, 육묘트레이의 셀 하단으로부터 진공을 발생시켜 묘를 떨어뜨리는 진공 흡인부, 낙하되는 묘를 감지하는 센서와 블로워 및 공압 실린더로 구성된 진공 발생부, 혈공된 포트를 진공 발생부의 유도관으로 옮기는 포트 이송부 등으로 설계 제작하였다. 이식 메커니즘은 육묘트레이 하단부로부터 플러그묘를 1개씩 진공흡인하는 방식을 채택하였고, 이를 위해 상하 모두 개방된 72공 육묘트레이($L538{\times}W280{\times}H45mm$)를 윗부분(Ø35mm) 보다 아랫부분(Ø37mm)의 셀이 넓은 형상으로 PP재질의 육묘트레이를 사출금형 제작하였다. 묘 이송부에 장착된 플러그묘는 X축 방향(12개 셀)으로 이식작업이 이루어지고, Y축(6개 셀)으로 이동된 후 다시 동일한 방향으로 연속 작업이 가능하도록 제어프로그램을 구성하였다. 이식 원리는 진공 흡인부에 플러그묘가 이송되면 진공 발생부의 흡착패드가 위로 전진하여 진공을 발생시켜 묘를 흡인하고, 유도관 내에 부착된 광화이버센서에 의해 묘를 감지하여 블로워와 공압실린더를 제어함으로써 이식 공정이 끝나게 된다. 로메인상추의 플러그묘를 대상으로 진공흡인 시험을 실시한 결과 묘 손상없이 이식작업이 가능한 것으로 확인되었다.