• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.3
• /
• pp.222-237
• /
• 2024

Objectives: This study aims to assess the current status of work environment measurement (WEM) for carcinogenic, mutagenic, reproductive toxic substances and to identify their high-risk industries for hazard surveillance and risk assessment. Methods: WEM Data from 37 specially managed CMR substances (2018-2022), the high-risk industries were identified by using estimated 95th percentile levels (X_0.95) of measurements compared with the occupational exposure limit (OEL). Results: The substances most frequently measured were nickel (insoluble), followed by sulfuric acid, lead, chromium (VI), formaldehyde, phenol, dimethylformamide and benzene. The industries with highest number of measurement samples for special management substances were plating of metals, followed by hospitals, general repair services of motor vehicles, building of ships, manufacture of synthetic resin and other plastic materials, manufacture of finished medicaments. Out of the 37 special management substances studied, 22 had a non-detection rate of over 90%. The rate of samples exceeding the OEL was less than 1% for all substances. The substance with the highest number of samples exceeding the OEL was trichloroethylene, which also had the highest average concentration compared to exposure limit. The substances with the highest percentage of industries which (X_0.95) exceeding OEL was formaldehyde followed by sulfuric acid, trichloroethylene, lead, I-bromopropane etc. Conclusions: This study identified high-risk industries of CMR sunstances, highlighting the need for prioritizing these industries in hazards surveillance and risk assessment.

• Korean Journal of Veterinary Research
• /
• v.29 no.3
• /
• pp.393-405
• /
• 1989

This study was carried out to treatment test for bovine mastitis by the determination of adenosine triphosphate (ATP) based on firefly bioluminescence. The results obtained are followed; 1. In the susceptibility test, cephalothin which looks the most effective were sensitive to Staphylococcus sp. (72.3%), Micrococcus sp. (84.2%), Streptococcus sp. (72.7%) and Gram positive bacilli (72.7%), Gram negative bacilli were sensitive to gentamicin (92.3%) and Yeast-like-fungi was the most sensitive to clotrimazole, and nystatin in order. 2. When the number of bacteria, such as Staphylococcus aureus, Candida tropicalis isolated from the mastitis milk were counted by conventional agar plating technique, and compared with the concentration of bacterial ATP, it gave a good linear relationship. The content of ATP per Staphylococcus aureus, cell was 3.1fM and Candida tropicalis showed the high level of A TP (90fM). 3. The ATP assay was applied to the determination of minimal inhibitory concentration (MIC) of various antibiotics. When Staphylococcus aureus was incubated in the presence of different concentration of tetracycline, erythromycin, kanamycin and streptomycin sulfate and the growth was monitored by the conventional agar plating technique and ATP assay, both methods shown the same results that they were 1mcg/ml, 2mcg/ml, 6.25mcg/ml and 8mcg/ml, respectively. 4. For the determination of susceptibility of sensitive and resistant Staphylococcus au reus isolated for the milk with mastitis to tetracycline, erythromycin kanamycin and streptomycin sulfate, the minimum time required for the test was determined by the assay of ATP every 30 minutes during incubation of 3 hours at $37^{\circ}C$. ATP concentration time curve calculated on both resistant and sensitive strains incubated 3 hours as the optimum time for the determination of susceptibilities of various antibiotics exemed. The ATP concentration of each test broth (antibiotic containing), expressed as a percentage of its own control brith (antibioticfree) indicated values of 30% to be indicative of each antibiotic sensitivity. Single time point ATP assay carried out on the various sensitive and resistant of Staphylococcus aureus to antibiotics examined after 3 hours at $37^{\circ}C$ correlated exactly with disc diffusion and MIC. 5. In the cure of intramammary treatment of bovine mastitis in lactating quarters, the cure rate of Staphylococcal mastitis showed to cephalexin (80%), cloxacillin and gentamicin (70%), ampicillin and oxytetracycline (60%), and Streptococcal mastitis showed to cephalexin (85%), penicillin (80%), cloxacillin and oxytetracycline (75%), and ampicillin (70%), but intramammary antimycotic drug (clotrimazol) were only a little effect about fungal mastitis.

• Development and Reproduction
• /
• v.12 no.1
• /
• pp.51-56
• /
• 2008

To optimize the cell culture conditions of zebrafish embryonic cells, we compared the efficiency of three types of medium, DMEM, K-NAC and D-NAC. In this study, we showed that the cells grown in K-NAC have better plating efficiency than DMEM, especially in the case of low cell seeding density. However, cells grew slower in K-NAC than those in DMEM in confluent cultures. The effect of 0.1% zebrafish embryo extracts was minimal. The presence of 1% trout serum in culture medium significantly increased the growth rate of cells(p<0.05). No difference was found at $2{\sim}3{\times}10^5$ cell seeding density(p<0.05). At $4{\sim}5{\times}10^5$ cell seeding density, cells grew better in DMEM than K-NAC (p<0.1). The results suggest that supplementation of NAC and A2P in Keratinocyte SFM may improves plating efficiency when cells are plated at low population. No difference was found for cell growth in either medium with 5%, 10% or 15% FBS supplemented (p<0.05). Cells culture in D-NAC grew significantly better than those in DMEM(p<0.05). Our results clearly showed that the use of NAC and A2P in the culture medium has a positive effect on cell growth regardless of the amount of FBS added.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.153-158
• /
• 2002

The effects of leveler on the copper trench filling were investigated during damascene plating process. To investigate the trench filling effect with the addition of a leveler, a cross-section images of the electroplated trenches with the width of$0.37{\mu}m,\;and\;0.18{\mu}m$ were observed by field emission scanning electron microscope (FE-SEM). Polyethylene glycol(PEG), 3-mercapto-1-propanesulfonic acid and Janus Green B were used as a carrier, an accelerator and a leveler. $0.37{\mu}m$ trenches were superfilled without voids, but there was voids formation in $0.18{\mu}m$ trenches when the leveler was not added into the electrolyte. On the other hand $0.18{\mu}m$ trenches were superfilled without voids with the addition of the leveler due to the reduction growth rate of copper at protrusions and edges, which yield smooth final deposit surface. The leverer effect becomes more significant as the width of trenches becomes smaller when trenches are filed.

• Membrane Journal
• /
• v.28 no.4
• /
• pp.252-259
• /
• 2018

An acidic, real metal-plating wastewater was treated by a fluidized bed membrane reactor introduced with granular activated carbon (GAC) as fluidized media. With GAC fluidization, there was no increase in suction pressure with time at each flux set-point applied. At neutral solution pH, much less fouling rate was observed than acidic pH under GAC fluidization. Higher solution pH resulted in the increase in particle size in metal-finishing wastewater, thus producing a less dense cake structure on membrane. More than 95% of chemical oxygen demand was observed from the fluidized bed membrane reactor under GAC fluidization. Total suspended solid concentration in membrane permeate was near zero. At the raw wastewater pH, no removal of copper and chromium by the fluidized bed membrane reactor was observed. As the pH was increased to 7.0, removal efficiency of copper and chromium was increased considerably to 99 and 94%, respectively. Regardless of solution pH tested, more than 95% of cyanide was removed possibly due to the strong adsorption of organic-cyanide complex on GAC in fluidized bed membrane reactor.

• Journal of Surface Science and Engineering
• /
• v.39 no.4
• /
• pp.179-189
• /
• 2006

High velocity oxygen fuel(HVOF) thermal spray coating of WC-Co powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen and the brittleness of ceramics coating. WC-Co micron and nano powder were coated by HVOF thermal spraying method for the study of durability improvement of the high speed spindle. Coatings were planned by Taguchi program for the four spray parameters of spray distance, flow rates of hydrogen, oxygen and powder feed rate. Optimal coating process was obtained by the studies of coating properties such as porosity, surface roughness, micro hardness, and micro structure. WC-Co micron and nano powder were coated on the Inconel 718 substrate by the optimal coating process obtained in this study. The wear behaviors were studied by the sliding wear tester at room temperature and at an elevated temperature of $500^{\circ}C$ for the application to high speed spindle. Sliding wear test was carried out for four most promising hard coatings of chrome coating, ceramics coatings such as $A1_2O_3,\;Cr_2O_3$ and HVOF Co-alloy T800 for the comparison of their wear behaviors. HVOF WC-Co coating was better than other coatings showing highest micro hardness of 1400 Hv and comparable friction coefficients with others. HVOF WC-Co coating is a strong candidate for the replacement of the traditional hard chrome plating for the high speed spindle.

• Resources Recycling
• /
• v.26 no.4
• /
• pp.88-94
• /
• 2017

The recovery of gold in cyclone type electrolytic cell was conducted from solution for stripping gold of PCB by cyanide. The electrolytic recovery behaviors of gold was investigated by reaction time and addition of electrolytic sodium hypochlorite (NaOCl) and gold plating additive (KG-120). Because the electrolysis generated NaOCl reacted with the cyanide in the leachate by alkaline chlorination, more than 99% of the cyanide was removed at a $NaOCl(g)/CN^-(g)$ ratio of 1.0. When NaOCl was added during the recovery of the gold from cyanide leachate in the cyclone electrolytic cell, the recovery of gold was 98% at the ratio of $NaOCl(g)/CN^-(g)$ from 0.5 to 2.5 in 480 minutes and decreased rapidly over the ratio of 3.0. Gold was recovered more than 99% by adding 1.5 and 4.5%(v/v) of KG-120 with NaOCl in 480 minutes. In particular, when the concentration of KG-120 was 3.5 and 4.5%(v/v), more than 96% of gold was recovered within 240 minutes and the initial recovery rate was relatively faster. The optimum concentration of KG-120 is 3.5%(v/v) considering the economic feasibility and efficiency.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.4
• /
• pp.450-457
• /
• 2019

Objective : Anterior cervical discectomy and fusion (ACDF) is commonly used surgical procedure for cervical degenerative disease. Among the various intervertebral spacers, the use of allografts is increasing due to its advantages such as no harvest site complications and low rate of subsidence. Although subsidence is a rare complication, graft collapse is often observed in the follow-up period. Graft collapse is defined as a significant graft height loss without subsidence, which can lead to clinical deterioration due to foraminal re-stenosis or segmental kyphosis. However, studies about the collapse of allografts are very limited. In this study, we evaluated risk factors associated with graft collapse. Methods : We retrospectively reviewed 33 patients who underwent two level ACDF with anterior plating using allogenous bone graft from January 2013 to June 2017. Various factors related to cervical sagittal alignment were measured preoperatively (PRE), postoperatively (POST), and last follow-up. The collapse was defined as the ratio of decrement from POST disc height to follow-up disc height. We also defined significant collapses as disc heights that were decreased by 30% or more after surgery. The intraoperative distraction was defined as the ratio of increment from PRE disc height to POST disc height. Results : The subsidence rate was 4.5% and graft collapse rate was 28.8%. The pseudarthrosis rate was 16.7% and there was no association between pseudarthrosis and graft collapse. Among the collapse-related risk factors, pre-operative segmental angle (p=0.047) and intra-operative distraction (p=0.003) were significantly related to allograft collapse. The cut-off value of intraoperative distraction ${\geq}37.3%$ was significantly associated with collapse (p=0.009; odds ratio, 4.622; 95% confidence interval, 1.470-14.531). The average time of events were as follows: collapse, $5.8{\pm}5.7months$; subsidence, $0.99{\pm}0.50months$; and instrument failure, $9.13{\pm}0.50months$. Conclusion : We experienced a higher frequency rate of collapse than subsidence in ACDF using an allograft. Of the various preoperative factors, intra-operative distraction was the most predictable factor of the allograft collapse. This was especially true when the intraoperative distraction was more than 37%, in which case the occurrence of graft collapse increased 4.6 times. We also found that instrument failure occurs only after the allograft collapse.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.4
• /
• pp.385-391
• /
• 2016

Objective : The purpose of this study was to evaluate long-term follow-up radiologic/clinical outcomes of patients who underwent anterior cervical discectomy and inter-body fusion (ACDF) with stand-alone cages (SAC) in a single academic institution. Methods : Total 99 patients who underwent ACDF with SAC between February 2004 and December 2012 were evaluated retrospectively. A total of 131 segments were enrolled in this study. Basic demographic information, radiographic [segmental subsidence rate, fusion rate, C2-7 global angle, and segmental angle changes)/clinical outcomes (by Odom's criteria and visual analog score (VAS)] and complications were evaluated to determine the long-term outcomes. Results : The majority were males (55 vs. 44) with average age of 53.2. Mean follow-up period was 62.9 months. The segmental subsidence rate was 53.4% and fusion rate was 73.3%. In the subsidence group, anterior intervertebral height (AIH) had more tendency of subsiding than middle or posterior intervertebral height (p=0.01). The segmental angle led kyphotic change related to the subsidence of the AIH. Adjacent segmental disease was occurred in 18 (18.2%) patients. Total 6 (6%) reoperations were performed at the index level. There was no statistical significance between clinical and radiological outcomes. But, overall long-term clinical outcome by Odom's criteria was unsatisfactory (64.64%). The neck and arm VAS score were increased by over time. Conclusion : Long-term outcomes of ACDF with SAC group were acceptable but not satisfactory. For optimal decision making, more additional comparative long-term outcome data is needed between ACDF with SAC and ACDF with plating.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.4
• /
• pp.425-430
• /
• 1983

Rice (Oryza sativa L.) anthers collected from different genotypes were cultured to investigate the priority to increase callus production rate among several factors affecting on callus formation. Rice varieties, F$_1$ hybrids and F$_2$ plants differed greatly in their abilities to produce callus from anthers, and it was confirmed that the culturability of rice anther was a heritable characteristic. Cold shock treatment before plating anthers promoted callus formation rate, but combined effect with genotype having high culturability was more significant. The response to sucrose concentration in culture medium in callus induction rate was different between rice genotypes, but combined effect with genotype was not significant. Single supplement of NAA to R$_2$ medium increased callus production rate remarkably only in rice genotype having high culturability. Conclusively selection of genotypes is most important to increase callus initiation frequency from rice anthers.