• 한국환경복원기술학회지
• /
• 제5권4호
• /
• pp.19-30
• /
• 2002

The stability of slope using root-pile like to the reinforcements is affected by the interaction behavior mechanism of soil-reinforcements. Through the studying on the interaction in joint of its, therefore, the control roles can be find out in installed slope. In study, the stress level ratio based on the insert angle of installed reinforcements in soil used to numerical analysis, which was results from the duty direct shear test in Lab. The maximum shear strain variation on the reinforcements was observed at insert angle, which was approximately similar to the calculated angle based on the equation proposed by the Jewell. The elasto-plastic joint model on the contact area of soil-reinforcements was presumed, the reinforced soil assumed non-linear elastic model and the reinforcements supposed elastic model, respectively. The finite element analysis of assumed models was performed. The shear strain variation of non-reinforced state obtained by the FEM analysis including elasto-plastic joint elements were shown the rationality of general limit equilibrium analysis for the slope failure mode on driving zone and resistance zone, which based on the stress level step according to failure ratio. Through the variation of shear strain for the variation of inserting angle of reinforcements, the different mechanism on the bending and the shear resistance of reinforcements was shown fair possibility.

• Archives of Plastic Surgery
• /
• 제45권1호
• /
• pp.58-61
• /
• 2018

Background Venous anastomosis is an important component of digital replantation, but is not always feasible, as some cases require external bleeding to treat venous congestion in the replanted tissue. In the present study, we evaluated the relationship between the number of vein anastomoses and the survival rate of Tamai zone I replantations. Methods A retrospective review was performed of all patients who underwent replantation of a fingertip amputation between 2014 and 2016. Patient charts were reviewed for demographic information, the mechanism of injury, the number of venous anastomoses, and the use of anticoagulation, external bleeding, and/or leeches. The cohort was divided into 3 groups depending on the number of venous anastomoses: no veins (group 1), a single vein (group 2), and 2 or more veins (group 3). Survival rates and external bleeding rates were analyzed across the groups. Results The review identified 143 fingertip replantations among 134 patients. The overall survival rate was 94% (135 of 143). Failures were due equally to venous complications (n=4, 50%) and to arterial complications (n=4, 50%). Our analysis did not identify any correlation between the number of veins anastomosed and the replant survival rate (P=0.689). However, a greater number of anastomoses was associated with a significantly lower frequency of external bleeding (P=0.017). Conclusions The number of venous anastomoses was not correlated with the survival rate. However, a greater number of venous anastomoses was associated with a decreased need for external bleeding, corresponding to a significant decrease in the need for postoperative monitoring and leech therapy.

• 대한미세수술학회:학술대회논문집
• /
• 대한미세수술학회 1992년도 제12차 학술대회
• /
• pp.75-76
• /
• 1992

• 한국강구조학회 논문집
• /
• 제10권4호통권37호
• /
• pp.629-639
• /
• 1998

본 연구에서는 반복재하 실물대 실험에 의해 철골 모멘트접합부(column-tree 형식)의 내진거동을 평가하였다. 시험체는 $H-600{\times}200$ (보) 및 $H-400{\times}400$ (기둥) 계열의 SS41 (SS400) 압연형강으로 제작되었으며 보에 대한 패널존의 상대강도를 실험의 주요변수로 고려하였다. 본 실험결과에 의할 때 패널존의 강도가 클수록 열등한 내진성능을 보였다. 시험체의 모멘트 접합부에서 접합부의 파괴 이전까지 발휘된 총소성회전각은 1.8 (% rad)에서 3 (% rad) 범위에 있었다. 시험체의 접합부는 보플랜지 열영향부의 파단 또는 기둥플랜지 두께방향의 뽑힘으로 인하여 파괴되었다. 비록 제한된 실험자료이긴 하나 본 연구의 결과는 보에만 항복을 유발하는 것 보다는 패널존의 항복도 허용하는 것이 접합부의 전체적 소성변형능력을 높이는데 유리할 것임을 시사한다. 이러한 실험결과를 역학적으로 설명할 수 있는 모델도 제시하고자 하였다.

• Archives of Plastic Surgery
• /
• 제38권5호
• /
• pp.590-593
• /
• 2011

Purpose: Surgical site infections (SSIs) are the third most frequently reported nosocomial infection. Of these SSIs, mostly were confined to the incision associated with underlying disease as diabetes, cigarette smoking, systemic steroid use, obesity, operating room environment, suture and surgical technique. This study has been planned to reduce the SSIs by using Vicryl $plus^{(R)}$ (Ethicon, USA) which contains triclosan, a broad-spectrum antibacterial agent, into the infected wound to evaluate whether or not Vicryl $plus^{(R)}$ (Ethicon, USA) is effective to nosocomial bacteria using a zone of inhibition assay. Methods: We did a comparison of Vicryl $plus^{(R)}$ suture (with triclosan) size 2-0, 5-0 with $Vicryl^{(R)}$ suture (without triclosan) size 4-0 each as treatment and control group, applied in Mueller-Hinton agar infected by following mircroorganisms: Methicillin-sensitive $Staphylococcus$ $aureus$ (MSSA), Methicillin-resistant $Staphylococcus$ $aureus$ (MRSA), Acinetobacter baumanii, $Escherichia$ $coli$, Enterobacter faecalis, Pseudomonas aeruginosa, Candida albicans. Cultures were made of the selected mircroorganisms, seeding the study strain in agar plates for 24 and 48-hour period in an oven at $37^{\circ}C$ followed by zone of inhibition assay. Results: Vicryl $plus^{(R)}$ group has demonstrated to create a zone of inhibition against MRSA, MSSA and $A.$ $baumanii$, but no effect on $E.$ $faecalis$, $P.$ $aeruginosa$, $C.$ $albicans$. Vicryl $plus^{(R)}$ suture size 2-0 also had antibactericidal effect while Vicryl $plus^{(R)}$ suture size 5-0 did not. $Vicryl^{(R)}$ group had no zones of inhibition showing colonization at all mircroorganisms. Conclusion: Our results seem to warrant the use of Vicryl $plus^{(R)}$ as absorbable buried suture when concerning SSIs as a prophylaxis against surgical nosocomial infection.

• Archives of Plastic Surgery
• /
• 제49권5호
• /
• pp.596-603
• /
• 2022

Background We suggested an easy and effective harvesting technique to avoid injury to tissues adjacent to the latissimus dorsi (LD). Methods Between 2007 and 2017, breast reconstruction was performed with an LD flap using the "bottom-up" technique. Medical records were retrospectively reviewed. Data on postoperative complications, results, and follow-up were obtained. Nine cadaveric dissections were performed to assess positional relationships between LD and adjacent muscles based on the ribs where relevant muscles and LD attach. Overall, 78 LD flaps were harvested without complications. Results Average age was 45.4 years. The mean operation time was 260minutes. There were no abnormalities or injuries in the adjacent fascia and muscles during the flap harvest. Drains were removed at an average of 21.9 days postoperatively. In all cadavers, there was conjoined fascia between the thoracolumbar and LD fasciae. The average level of the merging point between the LD and external oblique muscle (EOM) was 8.9 to 11.1 ribs. The average level of the overlapping point between the LD and serratus posterior inferior (SPI) was 9.5 to 11.1 ribs. Conclusions There are three dangerous zones during LD flap harvesting. The first zone is where the conjoined fascia encompasses the LD and thoracolumbar fasciae. The second zone is where the LD merges with the EOM and the serratus anterior. The third zone is the lower part where the LD merges with the SPI and EOM. The "bottom-up" technique enables a more meticulous and atraumatic operation by beginner flap surgeons.

• 소성∙가공
• /
• 제7권2호
• /
• pp.177-185
• /
• 1998

The kinematically admissible veolcity field is developed for the shapes of dead metal zone and the curving velocity distribution in the eccentric plane dies extrusion. The shape of dead metal zone is defined as the boundary surface with the maximum friction constant between the deformable zone and the rigid zone. The curving phenomenon in the eccentric lane dies is caused by the eccentricity of plane dies. The axial velocity distribution in the plane dies is divided in to the uniform velocity and the deviated velocity. The deviated velocity is linearly changed with the distance from the center of cross-section of the workpiece. The results show that the curvature of products and the shapes of the dead metal one are determined by the minimization of the plastic work and that the curvature of the extruded products increase with the eccentricity.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.499-504
• /
• 2002

The microstructural change associated with the hardness profile in friction stir welded, age-hardenable 6005 Al alloy had been evaluated. Frictional heat and plastic flow during friction stir welding created the fine recrystallized grain (Stir Zone, SZ), the elongated and recovered grain (Thermo-Mechanical Affected Zone, TMAZ) in the weld zone. Heat affected zone (HAZ), which could be only identified by hardness test because there is no difference in the grain structure compared with that of the base metal, was formed beside the weld zone. A softened region had been formed near the weld zone during friction stir welding process. The softened region was characterized by the dissolution and coarsening of the strengthening precipitate during the friction stir welding. The sound joints of 6005 Al alloys were successfully formed under a wide range of the friction stir welding conditions.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.250-253
• /
• 1998

The kinematically admissible velocity field is developed for the shapes of dead metal zone and the curving velocity distribution in the eccentric plane dies extrusion. The shape of dead metal zone is defined as the boundary surface with the maximum friction constant between the deformable zone and the rigid zone. The curving phenomenon in the eccentric plane dies is caused by the eccentricity of plane dies. The axial velocity distribution in the plane dies is divided in to the uniform velocity and the deviated velocity. The deviated velocity is linearly changed with the distance from the center of cross-section of the workpiece. The results show that the curvature of products and the shapes of the dead metal zone are determined by the minimization of the plastic work and that the curvature of the extruded products increases with the eccentricity.

• 한국전산구조공학회논문집
• /
• 제15권2호
• /
• pp.315-327
• /
• 2002

본 연구의 목적은 패널영역을 고려한 2차 탄소성힌지해석을 이용한 평면 강뼈대구조물의 이산화 최적설계알고리즘을 개발하는데 있다. 강뼈대구조물의 일반적인 해석은 구조물의 거동에서 패널영역 변형의 효과를 고려하지 않는다. 최적설계의 목적함수는 강뼈대구조물의 중량을 함수로 취하였으며, 제약조건식은 하중저항계수법(AISC-LRFD1994)시방규정을 근거로 하였다. 강뼈대구조물의 해석에서 현실적인 모델 사용의 중요성을 입증하기 위해 접합부 모델에서 패널영역을 고려하지 않은 수치해석과의 비교로부터 이 모델의 타당성이 판명되어진다. 개발된 알고리즘은 범용 프로그램인 SAP2000의 치적설계결과와 비교하여 본 연구에서 개발된 최적화 알고리즘의 타당성을 입증하였다. 이 연구의 결과는 일반적인 강뼈대구조물의 설계방법보다 패널영역의 거동을 고려한 최적설계 알고리즘이 더 경제적인 설계라는 것을 나타내었다.