• Journal of Korean Dental Science
• /
• 제15권2호
• /
• pp.132-140
• /
• 2022

Purpose: Dental diagnostic records derived from study models are a popular method of obtaining reliable and vital information. Conventional plaster models are the most common method, however, they are being gradually replaced by digital impressions as technology advances. Moreover, three-dimensional dental models are becoming increasingly common in dental offices, and various methods are available for obtaining them. This study aimed to evaluate the accuracy of the measurement of dental digital models by comparing them with conventional plaster and to determine their clinical validity. Materials and Methods: The study was conducted on 16 patients' maxillary and mandibular dental models. Tooth size (TS), intercanine width (ICW), intermolar width (IMW), and Bolton analysis were taken by using a digital caliper on a plaster model obtained from each patient, while intraoral scans were manually measured using two digital analysis software. A one-way analysis of variance test was used to compare the dental measurements of the three methods. Result: No significant differences were reported between the TS, the ICW and IMW, and the Bolton analysis through the conventional and two digital groups. Conclusion: Measurements of TS, arch width, and Bolton analysis produced from digital models have shown acceptable clinical validity. No significant differences were observed between the three dental measurement techniques.

• 한국콘텐츠학회논문지
• /
• 제20권12호
• /
• pp.460-470
• /
• 2020

현대 생활에서 실내를 구성하는 벽면의 장식은 인테리어 장식에 의해 공간의 심리적인 상승효과로 전환되어 인간의 감성에 큰 영향을 미쳐왔다. 이번 논문에서 주요 관점은 일상생활에 밀접한 관계를 가지고 있는 실내 공간의 벽면에 60% 이상을 차지하고 있는 수입 타일을 일부 대체할 수 있는 새로운 장식 효과의 발견과 제품의 가능성을 연구하려고 한다. 이러한 해결 방법으로 2018년도에 개발된 색유리 플래스터 기법을 이용하여 포인트 타일을 제작하고 시뮬레이션을 이용하여 소비자의 구매 욕구를 충족시켜줄 수 있는 아트월 벽장식의 가능성을 모색한다. 타일에 적용된 문양들은 총 4가지의 패턴으로 귀얄, 방염, 면치기, 상감 문양을 활용하여 수입 타일의 천편일률적인 문양에서 벗어나고 우리의 감성에 맞는 전통적인 중간색의 발색 효과를 연구하였다. 그리고 벽장식의 공간 활용 방안 부분은 시뮬레이션을 통해서 욕실 주방, 거실과 나머지 빈 공간에 색유리 타일을 사용한 아트월과 아크릴 액자도 사용하였다. 이 연구를 바탕으로 새로운 시각의 도자기 포인트 타일이 모색되고 나아가 벽을 이용한 인테리어가 활성화되기를 바란다.

• 대한치과의사협회지
• /
• 제16권2호통권105호
• /
• pp.151-153
• /
• 1978

The author fabricated duplicate dentures by means of alginate-duplicated plaster dentures. The effect in duplicate dentures were the same as the original dentures in function as well as in shape, therefore, such technique was considered to be fully applicable in the clinic.

• 건축역사연구
• /
• 제23권4호
• /
• pp.47-56
• /
• 2014

Traditional wall is ground coat, twice plater, last plaster by such a process has made a wide variety of used materials and techniques are accordingly diverse. These traditional techniques handed down the traditional walls of the techniques, rather than coming to the lowered cut off at any moment from now when the technique is used, not knowing whether to be used. Repair and restore cultural property maintenance work, it is not only the outward form hiding inside it is a technique to keep the preservation of cultural assets can be called true. When viewed from the side walls of these conventional techniques to reveal changes in the traditional process by looking at the changes in technology with traditional techniques for cause shall be made in stock. This paper is from the late Joseon Japanese occupation of techniques ranging from traditional wall to reveal the change process to its current significance of cultural property repair method to be helped.

• 한국융합학회논문지
• /
• 제12권3호
• /
• pp.141-149
• /
• 2021

20세기 후반에 등장한 3D 프린터는 21세기에 들어와 4차 산업혁명의 핵심 분야로 자리매김하고 있다. 메이커 운동의 핵심 장비이자 21세기 새로운 가내수공업의 시발점인 3D 프린터는 여전히 낮은 출력 속도와 한정된 필라멘트 재료로 대량생산의 한계를 드러내고 있지만, 최근 도자 공예가들의 3D 프린터 사용은 기하급수적으로 늘고 있다. 하지만 과거 공예사에서 지난하게 반복되어 온 공예의 경전과 새로운 기술과의 불협화음을 타계하는 방법의 일환으로 본 연구는 3D 프린터를 이용하는 '석고 캐스팅' 기법에 주목했다. 이에 세계 도자 공예분야에서 활발히 석고 기법을 개발해 작가만의 디자인에 적용하고 있는 도예가 토니 한센, 위베 반 간스베크, 제이드 크롬프톤, 류희도의 캐스팅 기법을 분석한 후 효과적인 3D 모델링 방법과 3D 프린터를 이용하는 최적의 슬립 캐스팅 방법의 사례를 제시함으로써 3D 프린터와 공예의 융합을 위한 접점을 찾고자 했다.

• 산업경영시스템학회지
• /
• 제18권36호
• /
• pp.41-47
• /
• 1995

This study present a systematic and more economical anthropometric technique to acquire 3-D anthropometric data by the use of moire interferometry, image processing and computer vision techniques. An experiment was performed to measure in anthopometric variables (head and face), such as head length, head breath, length of ear to top of head, contained face areas, etc. We took fourty-five subjects with wide range of ages(18 years to 33 years old). The face area was calculated based on contour information. The results were then compared with plaster bandage methods. It turned out that the proposed method had 90.85% consistancy.

• Restorative Dentistry and Endodontics
• /
• 제46권4호
• /
• pp.50.1-50.8
• /
• 2021

Although several techniques have been proposed to remove fiber-reinforced composite (FRC) post, no safe and efficient technique has been established. Recently, a guided endodontics technique has been introduced in cases of pulp canal obliteration. This study describes 2 cases of FRC post removal from maxillary anterior teeth using this guided endodontics technique with a dental operating microscope. Optically scanned data set from plaster cast model was superimposed with the data set of cone-beam computed tomography. By implant planning software, the path of a guide drill was selected. Based on them, a customized stent was fabricated and utilized to remove the FRC post. Employing guided endodontics, the FRC post was removed quickly and safely with minimizing the loss of the remaining tooth structure. The guided endodontics was a useful option for FRC post removal.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제50권2호
• /
• pp.116-120
• /
• 2024

External nasal splints are commonly used for immobilization following nasal fracture reduction or rhinoplasty procedures. The literature documents the use of various materials like thermoplastic materials, aluminum, Orthoplast, fiberglass, plaster of Paris, and polyvinyl siloxane. These materials are bulky, time-consuming, expensive, and cumbersome to use, and have been associated with complications including contact dermatitis and epidermolysis. Furthermore, they cannot be retained if the situation warrants prolonged stabilization and immobilization. We introduce a new technique using readily available scalp vein catheter flanges as an external nasal stent. The technique is easy to master, inexpensive, and limits edema and ecchymosis, while stabilizing the reconstructed nasal skeleton in position during the healing period.

• 대한치과보철학회지
• /
• 제32권3호
• /
• pp.445-454
• /
• 1994

Osseointegrated implant prostheses are to provide normal function without compromising the unique interaction between the tissue and the implant. The essential requirement for the osseointegrated implant prostheses is passive fit of abutment. Therefore, the impression must be accurate and reproduciable since the resultant master cast precisely duplicates the clinical condition. The purpose of this study was to compare the accuracy of the master casts obtained from five impression techniques. Group 1 : To take impression with indirect technique and Impregum F. Group 2 : To take impression with unsplinted direct technique and Impregum F. Group 3 : To take impression with splinted direct technique and Impregum F. Group 4 : To take impression with unsplinted direct technique and Xanthano. Group 5 : To take impression with splinted dierct technique and Xanthano. The results were as follow : 1. In taking impression of Impregum F, there was no significant difference between to use of indirect technique and unsplinted direct technique.(p<0.05) 2. Unsplinted direct technique with Impregum F is less accurate than splinted direct technique with Impregum F or Xanthano and unsplinted direct technique with Xanthano.(p<0.05). 3. There was no significant difference between splinted direct technique with Impregum F and unsplinted direct technique with Xanthano.(p<0.05) 4. Splinted direct technique reproduce more accurate than unsplinted direct technique.(p<0.05) 5. Impression plaster produced less distortion than polyether.(p<0.05) As a result, splinted direct technique with Xanthano was the most accurate technique. As a result, splinted direct technique with Xanthano was the most accurate technique in this study. In addition to dimensinal changes in the materials used, positional errors were also attributed to the mechanical components used in the transfer porocess. Although the errors measured were relatively small, this study demonstrates the potential for distortions with the transfer technique used. Further study is indicated that ?the technique will be able to reproduce the intraoral relationship of implant fixtures reliably and predictably.

• Computers and Concrete
• /
• 제12권1호
• /
• pp.79-90
• /
• 2013

In this study, dynamic characteristics such as natural frequencies, mode shapes and damping ratios of RC frame is determined for different construction stages using Operational Modal Analyses method under ambient vibration. Full scaled, one bay and one story RC frames are selected as an application for different construction stages such as plane, brick in-filled and brick in-filled with plaster. The RC frame is vibrated by natural excitations with small impact effects and the response signals are measured using sensitive accelerometers during ambient vibration tests. Measurement time-frequency span and effective mode number are determined by considering similar studies in literature. Sensitive seismic accelerometers are used to collect signals obtained from the experimental tests. To obtain experimental dynamic characteristics, output-only system identification technique is employed namely; Enhanced Frequency Domain Decomposition technique in the frequency domain. It is demonstrated that the ambient vibration measurements are enough to identify the most significant modes of RC frames.