• Korean Journal of Medicinal Crop Science
• /
• v.18 no.2
• /
• pp.65-69
• /
• 2010

As cool-season plant, Panax ginseng C. A. Meyer is planted under shade-installation with tall front and low rear. However, at different planting positions, distinct differences come out because ginseng grows at the same position within 3~5 years and the growth circumstance changes a lot by the shade-installation. So, in this study, changes of temperature, photosynthesis and chlorophyll fluorescence with varieties of shading material and planting position were investigated. Light transmittances by polyethylene shade net and silver-coated shading plate as planting materials were measured according to different planting positions. Photosynthetic rate and chlorophyll fluorescence were measured by LI-6400-40 (Li-Cor). According to different planting positions, light intensity was higher in silver-coated shading plate than in polyethylene shade net, and higher at front than rear. Also, photosynthetic rate showed the same tendency, which had a positive correlation to light intensity. But this treatment caused a lower Fo compared with polyethylene shade net because of the stress by light and temperature. Also, Fv/Fm and ETR were higher in silver-coated shading plate. Fo was similar at front and rear according to silver-coated shading plate and ETR was higher at front.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.761-767
• /
• 1993

A precision planting system using computer controlled technology for mulching cultivation was developed and tested . The system consisting of a micro-computer, several optical fiber sensors and control actuators realized the mechanization of the precision planting operation. The film hole positions, existences of a seed on shutter were detected and the planting speed was measured. The shutter opening mechanism and a seed metering device driven by a stepping motor were controlled, automatically . The planting timing of the shutter opening mechanism were analyzed from a video camera motion analysis, theoretically. The results showed a sufficient accuracy of a seed planted into the center a film hole with a variety of planting speeded. The gravity point positions in film hole of seeds planted by the system just were within the area of +-5mm of the hole center when the hole diameter was 40mm.

• Journal of Biosystems Engineering
• /
• v.34 no.3
• /
• pp.140-146
• /
• 2009

The garlic, along with the red pepper, is one of the major seasoning vegetables in Korea. Garlic clove planting is one of the most laborious operations. Labor cost is the main source of high production cost of the garlic. Because of the geometrical uniqueness and irregularity of garlic cloves, mechanization of garlic clove planting is very difficult. To overcome price competition against the imported garlic, however, there has been a need of development of a clove metering device and a planting device for the garlic clove planter. Computer simulation, laboratory tests and field tests were conducted to develop a garlic clove planter. This research was conducted to drop garlic cloves into a soil holes through a drum bucket metering system and a rotary type planting system. Followings are the major achievements from this study. 1. The metering device consisted of a drum, a guide, a bucket and a bucket cover. Opening positions of the metering hopper were evaluated at different positions and trajectories of planting hoppers. The simulation showed that the optimum positions of hopper was -15${\sim}$0 mm in the x direction. 2. When the planter was tested under different soil textures and water contents, the best performances were obtained in a upland field with 29.1% water content and a paddy field with 18.3% water content where single clove metering and missing rate were 88.4% and 1.3%, and 90.7% and 2.0%, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.94-98
• /
• 1982

To understand the growth pattern of ginseng plant under shading, the vertical distribution of leaf area, leaf area index (LAI) and specific leaf weight (SLW) and changes in light intensity as affected by planting position were investigated in 3 to 5 years old ginseng plant populations. Light intensity was vertically lowest at about 10cm above the ground and became low at the rear planting position in 3-year-old population. When culturing bed (96cm in width) were divided into three parts at intervals of 32cm from front to rear, the leaf area in 3-year-old population was largest in middle 1/3 part of planting bed. Light intensity affected the SLW positively, but LAI showed no distinct difference among planting positions. The light environment of 4-year-old population was worse than that of 3-year-old population and leaf area and LAI differed greatly among planting positions. In 5-year-old population, leaf dry weight and leaf area of furrow part (that is, the amount of leaves protruded from the plants which were planted in 1st, 2nd or 3rd lines into the furrow) increased. The dry weights of leaves and stem increased considerably as plant became aged, and were distributed mainly in upper layer.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.3
• /
• pp.155-163
• /
• 2022

The tillering potential of panicle number type (PNT) rice greatly varies with planting density. Moreover, grain filling and ripening differ depending on the panicle position, which may further affect rice grain quality. The present study evaluated the grain quality of PNT rice sparsely planted to reduce production costs. The physicochemical characteristics of starch from the grains of PNT type rice 'Ilpum' planted at different densities (37, 50, 60, and 80 plants/3.3 m²) and at different positions of panicles (upper or lower on the culm) were determined. Overall, as the planting density decreased, the number of panicles increased but the starch content decreased, which further reduced the 1,000-grain weight. In particular, at the lowest density (37 plants/3.3 m²), protein content increased but particle size, enthalpy, and relative crystallinity decreased. The effects were more pronounced at lower than at upper panicle positions. These findings indicate that tillering potential differs with planting density, ultimately affecting the palatability of rice grains. Based on these findings, we propose restricting rice transplantation to a planting density of ≤37 plants/3.3 m² to achieve the best quality of grains at lower costs and with less labor.

• Journal of Ginseng Research
• /
• v.6 no.1
• /
• pp.67-74
• /
• 1982

To clarify the morphological characteristics of Korean ginseng cultivated, the shapes and frequencies of Inflorescence, flowering bud, fruit, and leaf were investigated. The shapes of inflorescence, flowering bud and fruit, and leaf were divided into 6, 3, and 7 groups, respectively. The frequencies of these shapes were not significantly different according to the planting positions.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.217-223
• /
• 2008

In this study, a garlic clove planter which is capable of planting holes in soil and planting a clove at the same time was designed and tested for film mulched beds. Planting characteristics of the planter were measured through field experiment. Some characteristics were analyzed with multibody dynamic simulation software. Simulation was performed on opening time of the planting hopper. Measured characteristics were position, angle, and reposition amount of garlic in sowing hole. Experiment results showed that the planted position of garlic in planting was 23.0 mm from the hole wall. The reposition amount of garlic was varied with its position and angle when the planted garlic was pressed by an angled compaction wheel. In case of type II position, the position movement of garlic was larger than type I. Average position movement of type II was 11.5 mm at $20^{\circ}$ of compaction wheel angle. These data suggest that cutting diameter of film opening must be larger than 33 mm to provide enough space for garlic sprouting. Also, simulation results showed that the maximum opening time of the planting hopper was 0.26 second.

• Korean Journal of Medicinal Crop Science
• /
• v.18 no.1
• /
• pp.51-55
• /
• 2010

This study was conducted to investigate the effect of planting position on the growth characteristics, yield and ginsenoside content in Panax ginseng C.A. Meyer at different growth stages. Referring to shoot growth characteristics, stem length, stem diameter and leave area were higher at front than rear, increasing as the proceeding of growth stages. But a lower chlorophyll contents was caused at front compared to rear and decreased as the proceeding of growth stages contrarily. According to root characteristics, root length and main body length were higher at front, with a positive correlation to growth stages, which was also shown on fresh root weight and dry root weight with the maximum in August. Meanwhile, the effect of planting position on ginsenoside content could also be definite by the highest content at front showing high light intensity, increasing as the proceeding of growth stages as well.

• IE interfaces
• /
• v.18 no.3
• /
• pp.288-296
• /
• 2005

Many jobs and activities in our daily lives require squatting postures. The fore part includes housekeepers, farmers, and welders and the latter includes a wide variety of activities such as housekeeping; planting, cultivating and harvesting various agricultural products; grinding, welding, etc. It is speculated that prolonged squatting postures without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is conducted to examine the proper height of stools according to the position of the working materials and to develop wearable stools for workers with squatting posture. Forty male and female subjects participated in the experiment to find the proper height of stools according to the position of the working materials. Subjects were asked to squat and work with 3 different working positions: floor level; ankle level; shank level of 3 different stool height conditions: 10cm height; 15cm height; and 20cm height. After 5 minutes of maintaining a squatting work posture while sitting on the different height stools, Likert summated rating method as well as pairwise ranking test was applied to evaluate the user preferences for provided stools under the conditions of different working positions. The results of statistical analysis show that the subjects preferred 10cm height stool for floor level, 15cm height stool for ankle level, 20cm height stool for knee level. We thus strongly recommend to use appropriate height stools in accordance with the different working positions. Moreover, a prototype wearable stool was designed such that workers with squatting posture do not need to move the stool while they are moving about. The purpose of developing wearable stool was to decrease the physical stress and hence promote worker's health who work with squatting posture.

• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1339-1347
• /
• 2014

This study were performed on roadside buffer green in Songpa-dong, Songpa-gu, Seoul in order to analyze the anion concentration according to the type of composition of roadside buffer green. Buffer green separating the physical structure of the measurement points and measurement locations were separated by roadside, green interior, the other side of the road. planting density and deposit of trees per each buffer green was measured in the order of mounding type> slope type> the plain type. If the measured temperature of the location-specific weather elements roadside> inside> the other side of the road in order of measurement and the temperature is lowered farther away from the road. If the relative humidity of the road on the other side> inside> the roadside in order to measure and this is the opposite of the temperature tendency. According to physical structure reduction of the temperature on the other side of the road and roadside in order of mounding type> the plain type> slope type was measured. As a result of measuring a anion therefore concentration of the anion inside of melt is in order of mounding type> the plain type> slope type, tended to match the melt characteristics. According to measured positions anion concentration is in the order of the other side of the road> inside> the roadside was measured. As a result of correlation analysis, in the case of measurement location-specific weather and anions the temperature is positive correlation, relative humidity is negative correlation and that's results of previous studies were supported.