• 한국건설관리학회논문집
• /
• 제21권3호
• /
• pp.20-27
• /
• 2020

플랜트 프로젝트의 성과 향상을 위해 EPC 업체들은 통합적 관점에서의 프로젝트 사업관리 방식 개발에 대해 지속적인 관심을 보이고 있다. 특히, Advanced Work Packaging (AWP)는 프로젝트 생애주기 관점에서 기존의 "작업체계" 개념을 통합하여 프로젝트 수행 방식을 일부 재조정하는 방식으로 사업성과 개선을 위한 방법으로 제시되고 있다. 그러나 아직까지 국내 EPC 업체들은 AWP 도입의 초기 단계로, AWP를 수행하기 위한 구체적인 연구가 부족한 실정이다. 이에 따라, 본 연구에서는 AWP 체계의 도입을 위해 EPC 기업에서 갖추어야 하는 조직역량 도출을 목표로 하였다. 문헌 고찰과 현직자 인터뷰를 통해 AWP 도입시 발생할 것으로 예측되는 주요 리스크를 도출하였으며, 맥킨지 7S 모델 체계에 맞추어 이를 방지하기 위한 29개의 조직역량 항목을 도출하였다. 이후 AWP 전문가 5인의 검증 과정에서 추가적으로 도출된 8개의 조직역량 항목을 반영하여 최종적으로 효과적인 AWP 도입을 위해 필요한 조직역량 37개를 도출할 수 있었다.

• 산업공학
• /
• 제11권2호
• /
• pp.177-190
• /
• 1998

The work-order performs an important role in make-to-order production. The development of work-order system in this production is more complex than work-order system in planing production. To construct work-order system, load of directors for work-order must be decreased, and production management between scheduling of master plan and current workshop conditions must be considered. In this study, we grasped troubles in present work-order system and flows of information for work order. Using these results are made database schemas and data flow diagrams for effective development of work-order system. And then, for successful establishment of work-order system and actual use of directors, we considered systematic and easy user-interface. For a case study, development procedures of work-order system are presented for plant factory.

• KSBB Journal
• /
• 제15권4호
• /
• pp.402-404
• /
• 2000

This work is method that uses a hydrolysis for increasing yield of paclitaxel in plant cell cultures. The best pH is 3.0 to obtain a maximum yield at fixed reaction temperature and time t pH 3.0 reaction temperature 80$^{\circ}C$ and reaction time 8 hr give the highest yield which is three time of control. This is very simple and efficient method to increase paclitaxel yield in plant cell cultures.

• 기술사
• /
• 제21권4호
• /
• pp.12-18
• /
• 1988

On the foundation work of Po-Ryong power plant #3 & #4. It was 30meters away from the running states of #1 & #2 plant site. In order to protect the #1 & #2 power plant facilities & factory structure. Allowable vibration was required below 0.07 gal. Therefore, it had to set up the anti-vibration trench to reduce the vibration reference and secondary. I applied the low gravity and low velocity explosives with M/S delay caps by cautious blasting pattern.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.48.6-48
• /
• 2002

in this paper, each methodology, e.g. normal single PID controller, direct synthesis method and inverse response compensator, will be compared to determine the best inverse response plant control method, by based on the appearance of the control performance and robustness from the simulation results. The flexibility of being able to maintain the system stability during the presence of plant model mismatch is one of the criteria to measure the robustness of overall control system. Once, plant has changed the condition, the model will need to be updated. Hence, the designed controller will not work properly. The caused of plant model mismatch is stayed by definition unknown but the most possib...

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.212-213
• /
• 2014

The purpose of this study is to suggest analysis model of RCB construction in nuclear power plant. For the objective, This study drew the risk factors of RCB construction from existing literature. The results of the study proposed analysis model made hierarchy in rebar, form, and concrete work. These will be baseline data for risk management in construction project of nuclear power plant.

• 대한인간공학회지
• /
• 제36권5호
• /
• pp.559-568
• /
• 2017

Objective: The aim of this study is to investigate the effective managerial factors influencing dose reduction of the nozzle dam installation and removal tasks ranking within top 3 in viewpoint of average collective dose of nuclear power plant maintenance job. Background: International Commission on Radiation Protection (ICRP) recommended to reduce unnecessary dose and to minimize the necessary dose on the participants of maintenance job in radiation fields. Method: Seven sessions of nozzle dam installation and removal task logs yielded a multiple regression model with collective dose as a dependent variable and work time, number of participants, space doses before and after shield as independent variables. From the sessions in which a significant reduction in collective dose occurred, the effective managerial factors were elicited. Results: Work time was the most important factor contributing to collective dose reduction of nozzle dam installation and removal task. Introduction of new technology in nozzle dam design or maintenance job is the most important factor for work time reduction. Conclusion: With extended task logs and big data processing technique, the more accurate prediction model illustrating the relationship between collective dose reduction and effective managerial factors would be developed. Application: The effective managerial factors will be useful to reduce collective dose of decommissioning tasks as well as regular preventive maintenance tasks for a nuclear power plant.

• 환경영향평가
• /
• 제19권6호
• /
• pp.625-631
• /
• 2010

The objective of this work was to investigate how carbon sink and sequestration of vegetation and soil in the development project area can impact the land use plan, in addition to carbon emission capacity of the development project when we conduct environmental impact assessment. Especially, we did this work for a development project of solar power plant which would be constructed in forest area. Through this work, we found that 1) the amount of carbon sink and sequestration largely decreased due to reduction of the green area, 2) in terms of carbon sink and sequestration, conservation of natural green area is better than construction of newly vegetated area, 3) biochar application into soil can become an alternative for increase of carbon sink, and 4) even though a solar power production does hugely reduce carbon emissions and offset the carbon sink and sequestration capacity from the forest, it is necessary to consider the public value of the forest(reduction of heat island, habitat etc.) in siting for development area.

• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.33-44
• /
• 2015

Domestic plant construction sites have a tendency to become bigger, more various and complicated. Moreover frequency of industrial incident is increasing due to short project period, coexistence work condition and using heavy construction equipment. Installing safety facilities and safety training contribute to prevent incident. But mostly incident happens due to workers' unsafe action and wrong work method. Technically, it is very difficult for us to closely manage workers preventing incident. Therefore, the role of foreman who ordinarily works together with his workers is considered more important. Specific execution plan was drawn through industrial incident statistics from Ministry of Labor and questionnaire survey to interest parties(supervisor, safety staff and foreman). If foreman has raised sense of belonging and responsibility by conducting practical safety training for his workers, manages job site and receives proper compensation for these roles, it will be expected that it fully influences incident decrease.

• The Plant Pathology Journal
• /
• 제28권4호
• /
• pp.423-427
• /
• 2012

Pseudomonas syringae pv. actinidiae strains, the causal agents of bacterial canker on kiwifruit, were isolated from Korea and Italy in 2011. Among 87 isolates, a total of six representative strains, three from Korea and three from Italy, were identified on the basis of biochemical and physiological tests. Identities were confirmed by PCR using P. syringae pv. actinidiae-specific primers PsaF1/R2, which amplified a 280-bp DNA fragment. The strains isolated from Korea in this study displayed BOX-PCR patterns similar to those isolated from Italy but different from those isolated previously in Korea or the pathotype P. syringae pv. actinidiae strain. The effector hopA1 and hopH1 genes, which are known to be present in strains isolated recently from France and Italy, were also present in P. syringae pv. actinidiae strains, SYS1, SYS2 and SYS4, isolated from Korea in this work. However, no amplicons of the expected size were obtained from strains previously isolated from Korea and Japan. In addition, the Korean strains isolated in this work belonged to haplotype I for the cts gene identical to those strains isolated from recent outbreaks in Italy. These results suggest that P. syringae pv. actinidiae strains isolated from Korea and examined in this work are a new type of strain similar to those found from recent outbreaks in Italy. This is the first report on the occurrence of cts haplotype I strains of P. syringae pv. actinidiae affecting kiwifruit plants in Korea.