• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.199-200
• /
• 2017

The Configuration Management(CM) of Nuclear Power Plant(NPP) is an activity that maintains consistency among the design requirement, facility configuration information and physical configuration. It is a systematic approach to performing various engineering tasks such as change management by identifying, documenting the characteristics of plant Structures, Systems and Component(SSC). The first activity that should be performed the configuration baseline setting at the start of project. The configuration baseline of the NPP construction phase is the status of the SSC of the plant at a specified process and time, and the actual configuration changes depending on the condition of plant. In this paper, I have studied the current status of configuration baseline used in the software industry and general plant industry, method of establishment for the configuration baseline which was first applied to the construction of NPP.

• 시스템엔지니어링학술지
• /
• 제17권1호
• /
• pp.107-113
• /
• 2021

Plant Configuration Management(CM) is an activity to maintain consistency of design requirements, physical configuration, facility configuration information throughout the life cycle of the plant by systematically managing changes that occur during the plant design and operation process. Conformity between information must be ensured not only in the design stage, but also in the case of design changes in the operation and maintenance stages, and thus a computer system capable of efficiently managing them is required. In particular, in consideration of an application to small and medium-sized domestic plants, a computer system that can support configuration management at a low cost is needed. Accordingly, in this study, a configuration management system has been developed to support the management of plant design information and change procedures in the operation stage of small and medium-sized plants. Here, a case for quantitatively evaluating the effectiveness of the developed system is described.

• Nuclear Engineering and Technology
• /
• 제39권2호
• /
• pp.123-128
• /
• 2007

In order to apply a static fault-tree (FT) method to a system or a plant whose configuration changes dynamically, condition gates and a post processing method are used to effectively accommodate these changes. An operator's performance change, which can be caused by these configuration changes, should also be considered to assess the risk to a plant in a more realistic manner. This study aims to develop an integrated framework to accommodate various configuration changes and their effect on an operator’s performance by using the FT model. We applied a condition-based human reliability assessment (CBHRA) method to consider various conditions endured by an operator. That is, we integrated the CBHRA method with the conventional post processing method for modeling the system configuration changes. The effect of the condition monitoring systems installed in a plant is also considered. In this study, we show an example application of the integrated framework to a probabilistic safety assessment for the shutdown phase of a nuclear power plant.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.231-232
• /
• 2016

Configuration Management (CM) is a process of identifying and documenting the characteristics of a Structures, Systems and Components (SSCs), and of ensuring that changes to these characteristics are properly assessed, approved, issued, implemented and verified. There are requirement management, change control, facility configuration information management for CM activities. In order to improve safety of Nuclear Power Plant(NPP), it is necessary to manage change item systematically. Existing CM concept is focused on the NPP in operation. On the other hand, NPP under construction is difficult to efficiently manage the change because of different change process from varoius stake-holders. This research considers method of consolidation change process for NPP to ensure that approved changes are accurately reflected in the design requirements, facility configuration information, and the physical configuration.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권4호
• /
• pp.358-364
• /
• 1999

The auxiliary transformers or start-up/stand-by transformer(s) are installed against the start-up and shut-down of generator and emergency status in fossil power plant. The on-site power supply configuration using these transformers must be determined, considering configuration requirements, site characteristics, reliability and availability severely because it is remarkably important for safety and ecfonomy of plant. The auxiliary or start-up/stand-by power supply configuration has been determined considering only safety requirements and construction cost until now in Korea. This paper presents general theorems for the reliability estimation and proposes 2-unit based 4 alternatives for the start-up power supply stystem of 500㎿ standardized fossil power plant. The reliability and unavailability of equipment, system and configuration are determined using minimal cut-set methodology. The optimized plan of 4 alternatives is determined based on this ultimate reliability and unavailability.

• 시스템엔지니어링학술지
• /
• 제14권2호
• /
• pp.8-15
• /
• 2018

In traditional Document Based Configuration Management(DBCM) environment, changes in a system's configurations are hard to be reflected to existing engineering documents. This nature of DBCM triggers unconformities of system configurations which could become great risks. Model-based Configuration Management(MBCM) has been introduced to solve the problem of DBCM by managing system's configurations through an unified model. Therefore, it is important to model engineering documents in a general modeling language, down to low-level information items to develop traceability and flexibility of a system's engineering information. So, in the research, to explore the possibility of Model-based Approach(MBA) in the field of configuration management, a development of a systems requirement document model using SysML based Views & Viewpoints concept has been studied.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.351-353
• /
• 2022

국내와 국외를 통틀어서 현재까지 원전사고가 수차례 있었고 이로 인한 크고 작은 피해가 있었다. 해외는 이러한 사고를 줄이기 위해서 형상관리라는 기술을 도입하여 원전 운영에 대한 안전성과 신뢰성을 향상 시켜왔다. 본 논문에서는 형상관리에 관한 기본적인 정보와 국외 원전의 형상관리 도입 성공사례들을 통해서 국내에 적용 가능한 기술적 부분을 확인하고 이를 국내 원전에 맞게 보완하여 새로이 적용할 수 있는지를 알아본다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권5호
• /
• pp.517-523
• /
• 1999

The Start-up transformers or on-site stand-by transformers are installed for the start-up and shut-down of generator and emergency status in unclear power plant. The on-site power supply configuration using these transformers must be detemined by considering configuration requirements, site characteristics, reliability and availability severely because it is remarkably important for safety and benefit of plant. The start-up or stand-by power supply configuration has been determined considering only safety requirements and construction cost up to now in Korea. I study various reliability estimating methods for the prediction of availability, and estimate the unavailability for the start-up power supply system of two 1,000㎿ unclear power plants. I also detemine the reliability and unavailability and unavailavility of equipment, system and configuration using FTA method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.87.5-87
• /
• 2001

In the past, we presented the tracking system with one sampling delay. In this paper, first we propose a tracking system with N-th sampling delay, in the case where an input-output pulse transfer function of a plant Z$\_$-N/. Secondly we propose a system configuration converting an input-output pulse transfer function of a plant into Z$\_$-N/ with the inverse system of the plant. Moreover, the proposed tracking system configuration is applied to an actual Ball and Beam system and good results are obtained.

• 한국건설관리학회논문집
• /
• 제19권6호
• /
• pp.34-45
• /
• 2018

원자력발전소는 총 사업비 약8.6조, 사업기간 10년 이상이 소요되는 대형 국가기반사업이며, 60년 이상 운영되는 국가경제 및 국민의 안전과 밀접한 시설이다. 따라서 설계, 건설, 운영 등 프로젝트 일련의 과정에서 정확하고 경제적 의사결정이 가능하도록 정확한 정보와 일관된 물리적 형상이 유지되어야 한다. 하지만 원전산업은 다른 산업에 비해 복잡하고 규제가 많아 일찌감치 형상관리의 중요성이 널리 인식되어왔지만, 목적과 주체가 명확하지 않아 체계적인 형상관리에 한계가 있었다. 따라서 본 논문은 많은 격실로 이루어진 APR1400을 설계요건과 형상정보를 반영한 실(Room)기반 데이터베이스 구축 방안을 제시하였다. 실 속성을 구분하는 4가지 요소를 선정하였으며, 이를 기반으로 한 데이터베이스를 활용하여 완성도 높고 체계적인 원자력발전소의 형상관리 체계 활용에 일조하고자 한다.