• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.5
• /
• pp.642-648
• /
• 2011

The purpose of this study was to determine the capsaicinoid and antioxidant compounds and to evaluate the biological activity of 40 different pepper (Capsicum annuum L.) breeding lines. Capsaicinoid and ascorbic acid content were measured with HPLC. Total polyphenolic and flavonoid contents and antioxidant activity were measured with spectrophotometric methods. The antiproliferative qualities of the samples against human breast tumor cells (MCF7) were assessed with a MTT assay. The nitric oxide content in the culture media was measured to evaluate the anti-inflammatory qualities of the samples using Raw264.7 macrophages. The capsaicinoid, ascorbic acid, polyphenolic and flavonoid content of the 40 pepper breeding lines were 0.1~204.2 mg/100 g (dry weight basis, DWB), 279.1~1695.5 mg/g (DWB), 2.6~10.2 mg/g (DWB), and 1.4~5.7 mg/g (DWB), respectively. The highest antioxidant, antiproliferative, and anti-inflammatory qualities were found in breeding line numbers 2500, 3201, and 3232, respectively. This study provides basic information useful to plant breeders and biotechnologists who are planning to breed pepper genotypes with high phytochemical content.

• Korean Journal of Environment and Ecology
• /
• v.27 no.5
• /
• pp.642-649
• /
• 2013

This study evaluated the efficacy of information and self-interpretive media that provide information on park environment using self-administered visitor survey to the Dadohaehaesang National Park, Korea. Excluding missing and unreliable responses, 205 valid responses were used for the analysis. Socioeconomic status and visiting behavior of the visitors to the Dadohaehaesang National Park were similar to those to other Korean national parks. Results showed that, of the self-interpretive media, 'Information board of park use and resources' were most frequently used (87.7%), followed by 'Interpretive label of woody plant,' and 'Bulletin boards for information and enlightenment.' 'Guided interpretation' was used less than 40% of the visitors. Visitors also highly rated the importance of the media (higher than 4.0 on average out of 5 point Liker scale question). The average performance rate was 3.82, suggesting that visitors were satisfied on the self-interpretive media. Visitors responded that 'Information board of park use and resources' and 'Bulletin boards for information and enlightenment' were not useful and, therefore, should be amended and managed to improve the self-interpretability of the media.

• Journal of the Korea Concrete Institute
• /
• v.28 no.6
• /
• pp.703-711
• /
• 2016

The present study is mainly aimed at securing adequate pores which are applicable to the aquatic environment and satisfying the required strength of porous concrete as a structure by substituting pumice for crushed stone which is usually used for the fabrication of porous concrete. Accordingly, in order to deduce the optimum mixing conditions applicable to the aquatic environment, we sought to evaluate the porosity, coefficient of permeability and compressive strength of porous concrete based on the target porosity and the mixing factors for pumice. By examining the porosity and coefficient of permeability of porous concrete and the physical properties of its compressive strength based on the target porosity and the mixing factors for pumice, it is judged that the optimum mixtures for porous concrete applicable to the aquatic environment which satisfy both the necessity of securing adequate pores and the required strength for porous concrete as a structure are PC I I-10-0, PC I I-10-5 and PC I I-10-10.

• Journal of the Korea Concrete Institute
• /
• v.28 no.6
• /
• pp.673-683
• /
• 2016

In recent years, frequent terror or military attack by explosion, impact, fire accidents have occurred. Particularly, World Trade Center collapse and US Department of Defense Pentagon attack on Sept. 11 of 2001. Also, nuclear power plant incident on Mar. 11 of 2011. These attacks and incidents were raised public concerns and anxiety of potential terrorist attacks on major infrastructures and structures. Therefore, the extreme loading researches were performed of prestressed concrete (PSC) member, which widely used for nuclear containment vessel and gas tank. In this paper, to evaluate the blast resistance capacity and its protective performance of bi-directional unbonded prestressed concrete member, blast tests were carried out on $1,400{\times}1,000{\times}300mm$ for reinforced concrete (RC), prestressed concrete without rebar (PSC), prestressed concrete with rebar (PSRC) specimens. The applied blast load was generated by the detonation of 55 lbs ANFO explosive charge at 1.0 m standoff distance. The data acquisitions not only included blast waves of incident pressure, reflected pressure, and impulse, but also included displacement, acceleration, and strains at steel, concrete, PS tendon. The results can be used as basic research references for related research areas, which include protective design and blast simulation under blast loading.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.5
• /
• pp.29-38
• /
• 2013

The G-class cement is commonly used in practice for geothermal well cementing in order to protect a steel casing that is designed to transport hot water/steam from deep subsurface to ground surface during operating a geothermal power plant. In order to maintain optimal performance of geothermal wells, physical properties of the cementing material should be satisfactory. In this paper, relevant factors (i.e., groutability, uniaxial compression strength, thermal conductivity and free fluid content) of the G-class cement were experimentally examined with consideration of various water-cement (w/c) ratios. Important findings through the experiments herein are as follows. (1) Groutability of the G-class cement increases by adding a small dose of retarder. (2) There would be a structural defect caused when the w/c ratio is kept higher in order to secure groutability. (3) Thermal conductivity of the G-class cement is small enough to prevent heat loss from hot steam or water to the outer ground formation during generating electricity. (4) The G-class cement does not form free water channel in cementing a geothermal well. (5) The Phenolphthalein indicator is applicable to the distinction of the G-class cement from the drilling mud.

• Korean Journal of Environment and Ecology
• /
• v.12 no.1
• /
• pp.78-90
• /
• 1998

An objective of this study was to provide database for the planting disign of buffer green space. Types, planting structure, and effect of vuffer green space were investigated in five housing complexes of newtown of metropolitan area, Korea. Buffer green space in the study sites were constructed as mounding, slope, and plate. The number of species was found 20 tree and sub-tree species(10 evergreen and 20 deciduous species ) and 13 shrub species. These species were planted in one-storyed planting structure and there was no difference with ornamental species in the urban parks. Effect of sound proof by the buffer green space was recognized but sound level in four types among the seven types was observed above standard sound level for housing complex(65dB). Effect of sound proof was especially most effective in the mounding type. It was found that planting density and index of plant crown volume were mot satisfied to the function of buffer green space because of lower density and crown volume than natural vegetation per unit. Based on these results, this study suggested that buffer green space is desirable to be developed in the mounding type over two meters height with multi-layer planting model. In addition, there is needed to consider vegetation structure of natural forest around the developing site.

• Korean Journal of Environment and Ecology
• /
• v.29 no.1
• /
• pp.14-20
• /
• 2015

We created species richness maps of mammals, birds and plants using "Nnational Ecosystem Survey" data and identified correlations between species richness maps of each taxa. We examine the distribution of species richness of each taxa and calculated conservation priority rank through plotting species-area curves using an additive benefit function in Zonation. The conclusions of this study are as follows. First, plant showed high species richness in Gangwon province and Baekdudaegan, and mammals showed high species richness at eastern slope of Baekdudaegan in Gangwon province unusually and the species richness of mammals distributed equally except Gyeonggi and Chungnam province. However, birds showed high species richness in the west costal because the area is the major route of winter migratory birds. Second, correlation of each taxa's distribution is not significant. Correlation between mammals and birds is positive but correlations between birds and others are negative. Because mammals inhabit in forest but birds mostly live in coastal wetlands and rivers. Therefore, bird's habitats are not shared with other habitats. Third, the probability of mammals occurrence is very low under 25% in species-area curve, others increase proportionally to area. Birds increase dramatically richness at 10% because bird's habitat is concentrated in coastal wetlands and rivers. Plants increased gently species richness due to large forest in Gangwon province. We can calculate the predicted number of species in curves and plan various conservation strategies using the marginal number of species. Finally, high priority ranks for conservation distributed mainly in Gangwon province and Baekdudaegan. When we compared with priority map and terrestrial national parks, the parks were evaluated as high priority ranks. However, the rank of parks away from Baekdudaegan was low. This study has the meaning of selecting conservation priority area using National Ecosystem Survey. In spite of the omission of survey data in national parks and Baekdudaegan, the results were good. Therefore, the priority rank method using species distribution models is useful to selecting protected areas and improving conservation plans. However, it is needed to select protected areas considering various evaluation factors, such as rarity, connectivity, representativeness, focal species and so on because there is a limit to select protected area only using species richness.

• Korean journal of applied entomology
• /
• v.46 no.3
• /
• pp.415-423
• /
• 2007

For the development of integrated pest management system by harmonizing biological and chemical control, some experiments were carried out to select low toxic pesticides and to evaluate residual toxicity to natural enemies. Leaf dipping method and body dipping method were set up for evaluating toxicity to minute pirate bug, Orius strigicollis adult. We had tested 52 kinds of pesticides (33 insecticides, 19 fungicides) commonly used to control greenhouse insects, mites, and disease pests to natural enemies at the recommended concentration. Fourteen insecticides by body dipping method, 12 insecticides by leaf dipping method and 19 fungicides were selected as low toxic pesticides to O. strigicollis adult. After insecticide spraying at recommending dose on the sweet pepper plant, we examined residual effect of insecticides by introducing natural enemies on different days. Safety interval for introduction of O. strigicollis adult was established according to residual toxicity of pesticides. Safety insecticides at one day after treatment were pyraclofos, methomyl, thiodicarb, esfenvalerate bifenthrin, alpha-cypermethrin, etofenprox, fenvalerate, imidacloprid, acetamiprid, abamectin, emamectin benzoate, spinosad, indoxacarb. However, residual toxicity of nee-nicotinoids last up to 21 days to O. strigicollis adults.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.3
• /
• pp.77-84
• /
• 2013

In this paper, we focus the changing role of universities of University-Industry Collaboration (UIC) for enriching the regional business ecosystem network. For this research, we analyze 'Regional Innovation System(RIS)' - a specific UIC program- which provides a marketing service for firms, especially, SMEs with a specific problem by a group of consultants including CEOs, professors, and heads of regional public or private service providers. Then we have analyzed using network analysis how the business network was changed from RIS. Moreover, we will interview the participants in the important position of the network and investigate the reason for bringing a change in the network structure by using this program. This study illustrates that various types of network are formed between university and SMEs. Furthermore, the networks surrounding SMEs are extended to the other people connected to them. This means that the business network of SMEs had been diversified via the facilitation of university. This study throws new highlights on the new role for the university as a network promoter in addition to the partner as a technology-provider in the regional business ecosystem. Moreover, the network analysis between before-and-after can be used for the evaluation of the effectiveness of the various UIC programs.

• Plant Journal
• /
• v.10 no.2
• /
• pp.48-59
• /
• 2014

Coupons which have same figure as weld joint of the forged steel valves and 1 inch nominal weld thickness were manufactured using ASTM A182 F92 material. After welding with GTAW method, the welded specimens have been post-weld heat treated at $705^{\circ}C$, $735^{\circ}C$, $750^{\circ}C$, $765^{\circ}C$, $795^{\circ}C$ and $825^{\circ}C$ for 1 hour per 1 inch nominal weld thickness each (Group 1) to evaluate characteristics of welds based on various holding temperature. Indeed, 3 welded specimens were post-weld heat treated for 30 minutes, 1 hour and 2 hour (Group 2) at $735^{\circ}C$ to evaluate characteristics of welds based on various holding time. Hardness values were measured at the weld metal, heat affected zone and base metal to observe hardness change depending on the condition. As a result of the evaluation, appropriate holding temperature for PWHT is proved as $750^{\circ}C$ and $765^{\circ}C$ for 1hour per 1 inch nominal weld thickness. Indeed, holding for 1 hour per 1 inch nominal weld thickness was insufficient for PWHT effect when the holding temperature was at $735^{\circ}C$. The microstructure of post-weld heat treated weld metal was determined as tempered-martensite structure.