• Journal of the Korean Geophysical Society
• /
• v.2 no.4
• /
• pp.235-240
• /
• 1999

From the seismic network data of the Korea Institute of Geology, Mining & Materials during 1995-1996, we derived a composite fault-plane solution of the microearthquakes occurred in the Yangsan fault area. The composite fault-plane solution of nine events shows the orientation of fault 15 ± 3°in strike, 60 ± 8°in dip and 140°in rake or 128 ± 3°in strike, 56 ± 8°in dip and 37°in rake. The compressional axis of the stress field trends ENE to WSW, and this field suggests strike-slip motion with thrust component. The result is consistent with the 1996 Yeong-weol event and the stress field in and around the Korean Peninsula, previously reported.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.513-526
• /
• 2005

The objectives of this study are to perform extensive analysis on internal mass motion for a wider parameter space and to provide suitable design criteria for a broader applicability for the class of spinning space vehicles. In order to examine the stability criterion determined by a perturbation method, some numerical simulations will be performed and compared at various parameter points. In this paper, Ince-Strutt diagram for determination of stable-unstable regions of the internal mass motion of the spinning thrusting space vehicle in terms of design parameters will be obtained by an analytical method. Also, phase trajectories of the motion will be obtained for various parameter values and their characteristics are compared.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.495-500
• /
• 2003

The vibration of a flexible cantilever tube with nonlinear constraints when it is subjected to flow internally with fluids is examined by experiment and theoretical analysis. These kind of studies have often been performed that finds the existence of chaotic motion. In this paper, the important parameters of the system leading to such a chaotic motion such as Young's modulus and coefficient of viscoelasticity in tube material are discussed. The parameters are investigated by means of a system identification so that comparisons are made between numerical analysis using the parameters of a handbook and the experimental results. The chaotic region led by several period-doubling bifurcations beyond the Hopf bifurcation is also re-established with phase portraits and bifurcation diagram so that one can define optimal parameters for system design.

• Advances in nano research
• /
• v.12 no.3
• /
• pp.263-279
• /
• 2022

In this research, the physical education training quality was investigated using the entropy model to compute variance associated with a random value (a strong tool). The entropy and undefined estimation principles are used to extract the greatest entropy of information dependent on the index system. In the study of tennis motion tracking from a dynamic viewpoint, such stages are utilized to improve the perception of the players' achievement (Lv et al. 2020). Six female tennis players served on the right side (50 cm from the T point). The initial flat serve from T point was the movement under consideration, and the entropy was utilized to weigh all indications. As a result, a multi-index measurement vector is stabilized, followed by the confidence level to determine the structural plane establishment range. As a result, the use of the unascertained measuring technique of information entropy showed an excellent approach to assessing athlete performance more accurately than traditional ways, enabling coaches and athletes to enhance their movements successfully.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.184.1-184.1
• /
• 2010

Floating wind turbines have been suggested as a feasible solution for going further offshore into deeper waters. However, floating platforms cause additional unsteady motions induced by wind and wave conditions, so that it is difficult to predict annual energy output of wind turbines by using conventional power prediction method. That is because sectional inflow condition on a rotor plane is varied by unsteady motion of floating platforms. Therefore, aerodynamic simulation using Vortex Lattice Method(VLM) were used to investigate the influence of motion on the aerodynamic performance of a floating offshore wind turbine. Simulation with individual motion of offshore platform were compared to the case of onshore platform and carried out according to the wave height and the wave angular frequency.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.4
• /
• pp.8-15
• /
• 2003

When a typoon sets into harbour, a moored ship shows erratic motions and even mooring line failure may occur. such troubles may be caused by harbour resonance phenomena, resulting in large motion amplitudes at low frequency, which is close ti the natural frequency of th moored ship. The nonlinear motions of a ship moored to quay are simulated under external forces due to wave, current including mooring forces in time domain. The forces due to waves are obtained from source and dipole distribution method in the frequency domain. The current forces are calculated by using slow motion maneuvering equation in the horizontal plane. The wind forces are calculated from the empirical formula of ABS and the mooring forces of ropes and fenders are modeled as linear spring.

• Journal of Institute of Convergence Technology
• /
• v.3 no.1
• /
• pp.1-8
• /
• 2013

High-precision surface actuator, in which in-plane motion is realized by not two-dimensional actuator superposing linear actuators but integrated planar actuator, has been developed to cope with the severe target performance like precise motion with large envelope. It is very difficult to accomplish the performance with the traditional actuating principle. So, various methods have been tried to break through the problem. This paper discusses some meaningful trials performed in the Nano Measurement and Precision Motion Control Lab. of Korea National University of Transportation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.288-291
• /
• 2003

This paper presents an extended Twyman-Green interferometry that enables simultaneous and real-time measurement of 5-DOF motion errors of the translational moving stage. This method uses a null balancing technique in which two plane mirrors are used as target mirrors to generate an interferometric fringe utilizing the optical principles of Twyman-Green interferometry. Fringe is detected by 2D photodiode array for high-speed measurement. Errors are then independently suppressed by activation of piezoelectric actuators through real-time feedback control while the machine axis is moving. Experimental results demonstrate that a machine axis can be controlled with motion errors about 10 nm in linear displacement, 0.15 arcsec in angular displacement

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.62.1-62.1
• /
• 2011

The wind can be stronger and steadier further from shore, but water depth is also deeper. Then bottom-mounted towers are not feasible, and floating turbines are more competitive. There are additional motions in an offshore floating wind turbine, which results in a more complex aerodynamics operating environment for the turbine rotor. Many aerodynamic analysis methods rely on blade element momentum theory to investigate aerodynamic load, which are not valid in vortex ring state that occurs in floating wind turbine operations. So, vortex lattice method, which is more physical, was used in this analysis. Floating platform's prescribed positions were calculated in the time domain by using floating system RAO and waves that are simulated using JONSWAP spectrum. The average value of in-plane aerodynamic force increase, but the value of out-of-plane force decrease. The maximum variation aerodynamic force abruptly increases in severe sea state. Especially, as the pitch motion of the barge platform is large, this motion should be avoided to decrease the aerodynamic load variation.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.265-272
• /
• 2009

K. H. KIM, J. H. CHO, and S. C. LEE, The Effect of Taping on Lower Extremity during Jump Landing in Subjects with Functional Ankle Instability. Korean Journal of Sport Biomechanics, Vol. 19, No. 2, pp. 265-272, 2009. Ankle taping is thought that it can be very useful in clinical setting for reducing injury. However, the studies of ankle taping is focused only ankle joint. The purpose of this study was to examine the effect of taping on lower extremity during jump landing in subjects with functional ankle instability. we collected the data from VICON. Joint range of motion for sagittal plane, frontal plane and transverse plane were measured during a jump-landing task. Taping used in this study appeared to restrict ankle motion with altering the knee and hip joint ROM. We found ankle taping had effects of reducing PF, initial contact PF in sagittal plane, while increasing knee flexion, hip flexion, intial contact hip flexion statistically. It decreased ankle inversion, knee valgus, initial contact knee valgus, hip abduction in frontal plane and ankle abduction, hip internal rotation in transverse plane statistically. Ankle taping showed significant change Knee and hip joint ROM with ankle joint ROM.