• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.242-246
• /
• 2010

FTIR spectroscopy has been employed in order to quantitatively investigate the relationship between planar arrangements and selective reflectance of cholesteric liquid crystals. It was found that the selective reflection was enhanced as the amount of planar arrangements in cholesteric liquid crystals increased. Although the planar arrangements of cholesteric liquid crystals can be induced only by the shear force effect, it was more effective to use the alignment layer to obtain the perfect planar arrangements.

• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.272-276
• /
• 2011

The induction mechanisms of planar arrangements in cholesteric liquid crystals (CLC) which showed selective reflections of visible light were investigated by measuring the selective reflectivity and FTIR peak intensity of $C{\equiv}N$ stretching band. Although the planar arrangement of CLC was not as perfectly induced as the cases prepared with using alignment layers, it could be also induced by stretching polymer substrate or by applying shear forces. The planar arrangements were induced by forming CLC helical structures on top of liquid crystal molecules which were in contact with the substrate and oriented all in the same direction.

• Journal of applied mathematics & informatics
• /
• v.22 no.1_2
• /
• pp.577-587
• /
• 2006

We present several properties concerning infinite maximal planar graphs. Results related to the infinite VAP-free planar graphs are also included. Finally, we extend the result of W. Goddard, who showed that every finite 4-connected maximal planar graph is 4-ordered, to infinite strong triangulations.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.196-200
• /
• 2005

A 40 channel arrayed-waveguide grating (AWG) filter operating in C-band and L-band wavelength regions has been fabricated using PLC (Planar Lightwave Circuit) processes with 0.75 refractive index difference. Its design was optimized for matching the center wavelength with the ITU-recommended wavelength. The characteristics of the fabricated C-band AWG are as follows; average insertion loss < 2.5 dB, polarization-dependent loss < 0.3 dB, non-adjacent crosstalk >35dB, and the loss uniformity of 0.8 dB. In the L-band AWG, wavelength accuracy is below 0.02nm.

• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.449-452
• /
• 2009

In this paper, a novel compact and wideband fylfot-shaped planar monopole antenna is proposed. The fylfot-shaped is suggested to reduce the volume of a general crossed planar monopole antenna. The volume of the proposed antenna is about 1/4 of a general crossed planar monopole antenna under the conditions where the wideband characteristics are maintained. This technique is suitable for the design of wideband planar monopole antenna which needed a small volume.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4405-4418
• /
• 2016

Automatic image completion techniques have difficulty processing images in which the target region has multiple planes or is non-facade. Here, we propose a new image completion method that uses belief propagation based on planar priorities. We first calculate planar information, which includes planar projection parameters, plane segments, and repetitive regularity extractions within the plane. Next, we convert this planar information into planar guide knowledge using the prior probabilities of patch transforms and offsets. Using the energy of the discrete Markov Random Field (MRF), we then define an objective function for image completion that uses the planar guide knowledge. Finally, in order to effectively optimize the MRF, we propose a new optimization scheme, termed Planar Priority-belief propagation that includes message-scheduling-based planar priority and dynamic label cropping. The results of experiment show that our approach exhibits advanced performance compared with existing approaches.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.8
• /
• pp.79-88
• /
• 2009

This paper presents the analytical stiffness analysis method for a low-DOF planar parallel manipulator. An n-DOF (n<3) planar parallel manipulator to which 1- or 2-DOF serial mechanism is connected in series may be used as a positioning device in planar tasks requring high payload and high speed. Differently from a 3-DOF planar parallel manipulator, an n-DOF planar parallel counterpart may be subject to constraint forces as well as actuation forces. Using the theory of reciprocal screws, the planar stiffness is modeled such that the moving platform is supported by three springs related to the reciprocal screws of actuations (n) and constraints (3-n). Then, the spring constants can be precisely determined by modeling the compliances of joints and links in serial chains. Finally, the stiffness of two kinds of 2-DOF planar parallel manipulators with simple and complex springs is analyzed. In order to show the effectiveness of the suggested method, the results of analytical stiffness analysis are compared to those of numerical stiffness analysis by using ADAMS.

• Journal of electromagnetic engineering and science
• /
• v.3 no.1
• /
• pp.17-21
• /
• 2003

In this paper, we design an optimal planar array geometry for maximum side-lobe reduction. The concept of thinned array is applied to obtain an optimal two dimensional(2-D) planar array structure. First, a 2-D rectangular array with uniform spacing is used as an initial planar array structure. Next, we modify the initial planar array geometry with the aid of thinned array theory in order to reduce the maximum side-lobe level. This is implemented by a genetic algorithm under some constraint, minimizing the maximum side-lobe level of the 2-D planar array. It is shown that the optimized planar array structure can achieve low side-lobe level without optimizing the excitations of the array antennas.

• ETRI Journal
• /
• v.29 no.6
• /
• pp.725-735
• /
• 2007

This paper describes a line element planar antenna with three frequency bands. To obtain broadband characteristics, a modified planar antenna that has semi-elliptical elements based on the characteristics of a line element planar antenna is proposed and analyzed by the finite difference time domain method. Return loss characteristics are discussed as functions of the eccentricity values of semi-ellipse at each element. The broadbanding of the modified planar antenna is implemented based on the results. The planar antenna with three systems (an 800 MHz band cellular phone, a third-generation cellular phone, and a 2.4 GHz band wireless LAN system) is considered as an application example.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.502-507
• /
• 2004

The forward planar transformer, which had power capacity of 300 W, input voltage of 220 V, output voltage of 15 V, and switching frequency of 300 KHz, was designed and manufactured by using the planar core with large effective area and the flat copper leadframes for miniaturization and high efficiency of the switching mode power supply (SMPS). As well as, a forward converter equipped with the above mentioned planar transformer was manufactured and electromagnetic characteristics were investigated. The numerical value of turns for 1st and 2nd winding were 15 and 2 respectively The self inductance of 1st winding was 1.592 mH, very low leakage inductance of 2.7 $\mu$H, and the coupling factor of 0.928 were obtained at switching frequency of 300 KHz. The high efficiency of 88.62 % for the SMPS equipped with planar transformer was obtained at power capacity of 300 W.