• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2409-2417
• /
• 1994

The ODR(orthogonal double-rotation) digital lattice filters have desirable properties for VLSI implementation such as local connection, regularity and pipelinability. These filters are also known to exhibit good numerical behavior for finite precision implementation. Although these filters can be pipelined by the cut-set localization procedure, it should be noted that the maximum sample rate obtained by this technique is limited by the feedback computations. In this paper, a pipelining method for the ODR digital lattice filter is proposed, by which the sample rate can be increased at any desired level. it is also shown that the low-power CMOS digital implementation of ODR digital lattice filters can be done successfully using our pipelining method. The pipelining method is based on the properties of the Schur algoithm, constrained filter design methods, and the polyphase decomposition technique.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1280-1283
• /
• 2002

This paper discusses issues in VLSI design and implementation of high performance datapath circuits. Of particular concern will he various types of multiplier and adder, which are fundamental to DSP operations. Performance comparison will be provided in terms of sampling speed, layout area, and in particular, power consumption, with techniques that may be applied to reduce power dissipation also suggested. As an example, a low power, high performance recursive filter achieved through bit-level pipelining technique is illustrated

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.267-270
• /
• 2014

This paper presents the comparative performance of an adaptive FIR filter for a Delayed LMS algorithm. The delayed error signal was used to obtain a Delayed LMS algorithm to allow efficient pipelining for achieving a small critical path and area efficient implementation. This paper presents hardware efficient results (device utilization parameters) and power consumed. The FPGA families (Artix-7, Virtex-7, and Kintex-7) for a low voltage perspective are shown. The synthesis results showed that the artix-7 CMOS family achieves the lowest power consumption of 1.118 mW with 83.18 % device utilization. Different Precision strategies, such as the speed optimization and power optimization, were imposed to achieve these results. The algorithm was implemented using MATLAB (2013b) and synthesized on the Leonardo spectrum.

• The KIPS Transactions:PartA
• /
• v.12A no.1 s.91
• /
• pp.7-12
• /
• 2005

Scattered look-ahead(SLA) pipelining method can be efficiently used for high-speed or low-power applications of digital II R filters. Although the pipelined filters are guaranteed to be stable by this method, these filters suffer from large roundoff noise when the poles are crowded within some critical regions. An angle and radius constrained II R fille. design approach using modified Remez exchange algorithm and least squares algorithm is proposed to avoid tight pole-crowding in pipelined filters, resulting in improved frequency responses and reduced coefficient sensitivities. Experimental results demonstrate that our proposed method leads to chip area reduction by $33{\%}$ and low power by $45{\%}$ against the conventional method.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.4
• /
• pp.16-25
• /
• 1997

This paper shows a SDRAM opeating in 200MHz clock cycle which it use data interleave and pipelining for high speed operation. We proposed NdC (Negative DEaly circuit) to improve clock to access time(tAC) characteristics, also we proposed low power WL(wordline)driver circit and high efficiency VPP charge-pump circit. Our all circuits has been fabricated using 0.4um CMOS process, and the measured maximum speed is 200Mbytes/s in LvTTL interface.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.5
• /
• pp.361-368
• /
• 2003

A new high-speed direct digital frequency synthesizer using a low power pipelined parallel accumulator is proposed. The proposed pipelined parallel accumulator uses both pipelining and paralleling techniques to increase speed and to reduce power consumption. The 2-pipelined 2-parallel accumulator only consumes 66% and 69% power of the 4-pipelined accumulator and the 4-parallel accumulator respectively with the same throughput. The proposed accumulator can achieve higher throughput with smaller area and less power consumption in lower clock frequency. All circuit simulations and implementations are based on a 0.35um CMOS process with VCC = 3.3V.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.1
• /
• pp.43-50
• /
• 2007

In a high-speed flash style or a pipelining style analog-to-digital converter (A/D converter), the DC reference fluctuation caused by external noises becomes serious, as the sampling frequency is increased. To reduce the fluctuations in conventional A/D converters, capacitors have been simply used, but the layout area was large. Instead of capacitors, a low-noise and small-size DC reference circuit based on transmission gate (TG) is proposed in this paper. In order to verify the proposed technique, we designed and manufactured a 6-bit 2GSPS CMOS A/D converter. The A/D converter is designed with a 0.18um 1-poly 6-metal n-well CMOS technology, and it consumes 145mW at 1.8V power supply. It occupies the chip area of 977um by 1040um. The measured result shows that SNDR is 36.25 dB and INL/DNL is within 0.5LSB, even though the DC reference fluctuation is serious.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.788-795
• /
• 2000

Scattered look-ahead pipelining method can be efficiently used for high sample rate or low-power applications of digital recursive filters. Although the pipelined filters are guaranteed to be stable by this method, these filters suffer from large round off noise when the poles are crowed within some critical regions. To avoid this problem, a low-noise implementation technique was proposed using constrained Remez exchange algorithm. By the constrained filter design approach, the desired filter spectrum is satisfied while some of the pole angles are constrained to avoid pole crowding within critical regions. In the proposed approach, to obtain improved spectrum characteristics or better round off noise properties, the radius of the angle-constrained pole is optimized depending on the direction of the pole movement.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.11
• /
• pp.1-11
• /
• 1997

The transient current components of the dRAM are analyzed and the sensing current, data path operation current and DC leakage current are revealed to be the major curretn components. It is expected that the supply voltage of less than 1.5V with low VT MOS witll be used in multi-giga bit dRAM. A low voltage dual VT self-timed CMOS logic in which the subthreshold leakage current path is blocked by a large high-VT MOS is proposed. An active signal at each node of the nature speeds up the signal propagation and enables the synchronous DRAM to adopt a fast pipelining scheme. The sensing current can be reduced by adopting 8 bit prefetch scheme with 1.2V VDD. Although the total cycle time for the sequential 8 bit read is the same as that of the 3.3V conventional DRAM, the sensing current is loered to 0.7mA or less than 2.3% of the current of 3.3V conventional DRAM. 4 stage pipeline scheme is used to rduce the power consumption in the 4 giga bit DRAM data path of which length and RC delay amount to 3 cm and 23.3ns, respectively. A simple wave pipeline scheme is used in the data path where 4 sequential data pulses of 5 ns width are concurrently transferred. With the reduction of the supply voltage from 3.3V to 1.2V, the operation current is lowered from 22mA to 2.5mA while the operation speed is enhanced more than 4 times with 6 ns cycle time.

• The KIPS Transactions:PartA
• /
• v.10A no.6
• /
• pp.671-676
• /
• 2003

In this paper, we proposed a new First Partial product Addition (FPA) architecture with new compressor (or parallel counter) to CSA tree built in the process of adding partial product for improving speed in the fast parallel multiplier to improve the speed of calculating partial product by about 20% compared with existing parallel counter using full Adder. The new circuit reduces the CLA bit finding final sum by N/2 using the novel FPA architecture. A 5.14nS of multiplication speed of the $16{\times}16$ multiplier is obtained using $0.25\mu\textrm{m}$ CMOS technology. The architecture of the multiplier is easily opted for pipeline design and demonstrates high speed performance.