• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.691-699
• /
• 2014

In order to improve the dimensional stability and durability of wood, this study attempted to impregnate bismuth (Bi) - tin (Sn) alloy metal with low melting temperature into solid woods of three species such as radiata pine, red oak and white oak, and investigated to determine an optimum condition of manufacturing the metal alloy-wood composites with natural wood grains. These Bi-Sn alloys were chosen for this study because they were harmless to human and melting at low temperatures. The composites resulted in high dimensional stability and low thickness swelling, and also showed much improved performance such as high bending strength, high hardness, high electric conductivity, and high thermal conductivity as floor materials. A proper impregnating condition of all specimens was determined as 10 minutes of the preliminary vacuum time, and $185^{\circ}C$ of the heating temperature. The proper processing condition for radiata pine wood was 2.5 minutes of the pressuring time at the pressure of $10kgf/cm^2$. For red oak wood, 10 minutes of the pressuring time at the pressure of $30kgf/cm^2$ were the proper condition. The proper manufacture conditions for white oak wood was determined as 10 minutes of the pressuring time at the pressure of $50kgf/cm^2$.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.303-310
• /
• 2011

The mechanical properties of heat-compressed Radiata pine (Pinus radiata D.Don) by compression temperature and time were investigated. The compressive strength and bending strength of heat-compressed wood increased with increasing compression temperature and time. But the compressive strength and bending strength decreased with press temperature $220^{\circ}C$. It was considered due to thermal degradation during high temperature conditions. The surface hardness of heat-compressed wood increased with increasing compression temperature. However, the effect of compression time was negligible. The nail holding power was not affected by compression temperature and time.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.253-259
• /
• 2008

In this paper an optimum design of a lab-scale biofilter for absorbing ammonia has been proposed and analyzed. This biofilter is using pine chaff and wood shaving as filter materials. It is assumed that the biofilter can be used as a storage tank of swine manure slurry or swine stall. To evaluate the biofilter performance, the ammonia, mainly offensive odor ingredient, was measured. Swine compost was mixed with filter materials in ratio of 1:1 on weight base. Each test continued for 20 days. The ammonia emissions were reduced by 97.9% and 98.3% in case of using biofilter filled with pine chaff and compost, and wood shaving and compost, respectively. The system was tested with and without adding compost. It was found that the biofilter with wood shaving and compost has an ammonia removal efficiency of 94.1%, while biofilter with wood shaving only has 85.3%. The biofilter with wood shaving and compost showed 8.8% higher removal efficiency than that of wood shaving only. By mixing the compost, the number of microorganism was found to be about 2.3 times more than that of wood shaving only. Therefore it can be concluded that adding compost has a positive effect on the formation of microorganism.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.5
• /
• pp.1-10
• /
• 2006

The objective of this study was to elucidate the microscopic patterns of decay caused by brown-rot fungi of Tyromyces palustri and Gloeophyllum trabeum in Korean red pine (Pinus densiflora) and radiata pine (Pinus radiata) woods through light and electron microscopies. The ultrastructural changes of cell walls attacked by the two brown-rot fungi were compared in this respect. Macroscopically, radiata pine showed more ring and radial checks than Korean red pine. Microscopically, with the progress of decay, spiral checks associated with cross-field pits and bore holes in the cell wall were more remarkably numerous in the radiata pine than in the Korean red pine. In the radiata pine, G. trabeum produced more spiral checks in the cell wall than T. palustris. In the advanced stages of decay by G. trabeum, the erosions of ray cell walls were identified both in the Korean red pine and radiata pine but $S_3$ layers of tracheid walls were eroded only in the Korean red pine.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.2
• /
• pp.108-116
• /
• 2010

This paper explains the effects of wood drying on treatability (as determined by water uptake) of Japanese red pine (Pinus densiflora S. et Z.) at the sevenmoisture content (MC) levels above and below the fiber saturation point (FSP). According to the experimental results, it was found that water uptake (as the percentage of void volume filledwith distilled water, VVF%) was influenced by level of moisture content and percentage of void volume filled was improved effectively by kiln drying process. A significant relationship between moisture content and treatability was established. Permeability and liquid uptake were decreased above the FSP due to the effect of the less void space available in wood. Even though increased liquid uptake was observed at lower moisture content, no significant differences was observed moisture content below 20%. Therefore, this species need to be initially dried below FSP before treated with liquids. But drying moisture content below 10% might not be economical for the commercial purpose comparing drying the wood between 10 and 20% moisture content. The result of this study inferred that the treatability of pine wood can be improved by reducing the moisture content up to a certain level of 10~20% for allowing better performance.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.437-448
• /
• 2018

Physical characteristics of Korean red pine (Pinus densiflora) were investigated with different cultivation locations in Taebaek Mountains as Goseong-gun, Hongcheon-gun and Bonghwa-gun as experimental sites. Moisture content based on air-dried or green (artificial) wood was no significant differences with different cultivation places. Specific gravities of both sapwood and heartwood of red pine from Bonghwa-gun were higher than those from other two sites (Hongcheon-gun or Goseong-gun). Specific gravity of heartwood of red pine from Goseong-gun was higher than it from Hongcheon-gun, but this trend was opposite in case of sapwood. Higher specific gravity of red pine heartwood from Goseong-gun maybe resulted in higher strength than those of other sites. In shrinkage ratio, there was no significant difference among different cultivation places in radial directions, but red pine from Bonghwa-gun was higher than those of other sites in tangential directions. Hygroscopicity was no significant differences with different cultivation places. These results will be helpful information for efficient use of pinewood and good quality of pinewood production for genetical breeding improved.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.748-755
• /
• 2018

Timber from fast-growing tree species is susceptible to by biodeterioration attack, particularly subterranean termites. Impregnation with methyl methacrylate (MMA) potentially increases wood resistance to subterranean termite attack. Four wood species, namely sengon (Falcataria moluccana), jabon (Anthocephalus cadamba), mangium (Acacia mangium), and pine (Pinus merkusii), were impregnated with MMA, and samples of untreated and imidacloprid-preserved wood were prepared for comparison purposes. Small stakes, sized 0.8 cm by 2 cm in cross section by 20 cm in the longitudinal direction, were inserted into the ground for 3 months, and the weight loss of each specimen was determined at the end of the test period. A factorial $4{\times}3$ completely randomized design was used for data analysis; the first factor was wood species, and the second factor was treatment. The results showed that MMA polymer loadings were 27.88%, 24.91%, 14.14%, and 17.81% for sengon, jabon, mangium, and pine, respectively, and amounts of imidacloprid retention were $7.56kg/m^3$, $5.98kg/m^3$, $5.34kg/m^3$, and $9.53kg/m^3$, respectively. According to an analysis of variance, wood species, treatment, and interaction of both factors significantly affected the weight loss of wood specimens. Mangium had the smallest weight loss, followed by pine, sengon, and jabon. MMA impregnation into the wood increased the resistance of wood samples to subterranean termite attack during in-ground testing, but the resistance level was lower than that of imidacloprid-preserved wood. Except for mangium wood, the MMA treatment did not significantly affect resistance.

• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.460-465
• /
• 2008

When wood is exposed to natural weathering and UV radiation discoloration progresses. The color variation of heat-treated wood was investigated. Four domestic species were selected and heat-treated at $220^{\circ}C$ and naturally weathered for 42 days. Their colors were measured with a portable colorimeter. The color variations were different between species. The Korean red pine specimens were highly discolored by the natural weathering even though they were heat-treated. In contrast to Korean red pine, Korean pine is less discolored. The maximum color difference of larch was lower than Korean red pine. All specimens of birch exceeded the color difference criterion of 15 after 25 hours with the maximum of 28.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.66-74
• /
• 2002

The effects of phenol during ethylene carbonate (EC) liquefaction of pine bark in the presence of methanesulfonic acid (MSA) as a catalyst were investigated. Liquefaction of pine bark using EC in the presence of acid catalyst was very difficult in comparison to wood. Mixing ethylene glycol (EG) with EC improved the liquefaction process, but the maximum liquefaction yield did not exceed 78%. Mixing 20~30% phenol with EC was very effective for the liquefaction and the residue was remarkably decreased. More than 95% of liquefaction was achieved when about 30% phenol was mixed with EC. The reaction conditions, such as catalyst concentration, liquefaction temperature and time, type of catalyst and liquefying agent, had a great influence on the liquefaction process. The results of the average molecular weights and the amount of combined phenols for the liquefied products indicated that sulfuric acid (SA) causes high condensation reactions compared to MSA.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.429-437
• /
• 2015

It has been known that acetylation improves the dimensional stability of wood. Liquid phase acetylation is more popular than gas-phase acetylation for the effectiveness of weight gain of wood. In this study domestic red and Korean pine specimens were liquid phase acetylated and their physical properties, such as density, bending strength, dimensional stability etc., were investigated. Acetylation increased the average weights of red and Korean pine specimens by 10.4% and 9.2%, respectively, and their average oven-dry densities were increased by 6.9% and 4.6%, respectively. Acetylation did not influence on modulus of rupture (MOR), modulus of elasticity (MOE) and dynamic MOE (DMOE). The average percentage reduction in hygroscopicity (PRH) of red and Korean pine specimens were respectively 20.6% and 13.8%, while the average percentage reduction in water soaking (PRW) were respectively 20.0% and 8.5%. Thus it can be concluded that the liquid acetylation improved the dimensional stability of red pine specimens more than that of Korean pine specimens.