• Korean Chemical Engineering Research
• /
• 제43권5호
• /
• pp.549-559
• /
• 2005

최근에 환경오염과 자원고갈에 의해서 인류활동의 생태적 영향을 최소화하는 지속 가능한 산업 개발(sustainable industrial development)이 많은 관심을 받고 있다. 이를 위해서는 기존에 있던 산업단지를 환경친화적으로 변화시키거나 새로운 산업단지를 건설하여 개별 공장 내뿐만 아니라 한 산업단지 내의 각 기업들이 물질 및 에너지를 최대한 효율적으로 이용하는 생태산업단지로의 전환이 전 세계적으로 활발하게 이루어지고 있다. 생태산업단지(eco-industrial park, EIP)는 산업단지 내의 각 기업들이 물질, 용수 및 에너지를 최대한 폐기물, 에너지, 물질, 용수 등을 서로 효율적으로 재이용함으로써 경제, 환경, 사회적 이익을 얻는 것을 목표로 한다. 본 총설에서는 국내외 생태산업단지의 사례연구와 생태산업단지 개발의 중요한 기술들(에너지 교환, 물질 재이용, 용수 재이용, 환경영향평가)에 대하여 소개한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권4호
• /
• pp.34-38
• /
• 2006

Cycle analysis was performed in order to find the optimum design point of the LNG Boil-off gas re-liquefaction system. Thermodynamic analysis revealed the system could be defined by three state variables. Thus the system performance could be described by the three cold endpoint temperatures of the three-pass heat exchanger. This enabled us to investigate the cycle performance in terms of the heat exchanger parameters. To get access to the cycle states of higher system performances, larger heat exchangers were found necessary. Also the thermal pinch in cryogenic heat exchangers was found to act as a limiting factor to the system performance.

• Journal of Korean Neurosurgical Society
• /
• 제29권3호
• /
• pp.372-378
• /
• 2000

The carpal tunnel syndrome is one of the most common entrapment neuropathy. Surgical treatments consist of conventional open technique, alternative technique using retinaculatome, and endoscopic surgery. This study compares the outcomes of surgical treatment of carpal tunnel syndrome following conventional versus endoscopic release. The authors reviewed 56 cases of 33 patients with carpal tunnel syndrome treated surgically in our institute from January 1991 to May 1998. The follow-up evaluation was possible in 36 cases of 20 patients who had conventional release and in 11 cases of 7 patients with endoscopic release. The following parameters were evaluated for comparison : improvement of symptom, return to normal work, recovery of strength of grip and pinch, rate of complication, follow-up electrophysiologic finding. Compared with open decompression, the group of endoscopic decompression needed significantly less time to go back to work(p<0.001). Also strength of grip and pinch improved faster in the group of endoscopic decompression as well, compared with open decompression(p<0.05). These results indicate that endoscopic procedure is an excellent, minimally invasive method to treat carpal tunnel syndrome, performed by surgeons who are fully aware of the anatomy.

• Structural Engineering and Mechanics
• /
• 제27권6호
• /
• pp.697-711
• /
• 2007

Though extensive research has been carried out for the ultimate strength of steel reinforced concrete (SRC) members under static and cyclic load, there was only limited information on the applied analysis models. Modeling of the inelastic response of SRC members can be accomplished by using a microcosmic model. However, generally used microcosmic model, which usually contains a group of parameters, is too complicated to apply in the nonlinear structural computation for large whole buildings. The intent of this paper is to develop an effective modeling approach for the reliable prediction of the inelastic response of SRC columns. Firstly, five SRC columns were tested under cyclic static load and constant axial force. Based on the experimental results, normalized trilinear skeleton curves were then put forward. Theoretical equation of normalizing point (ultimate strength point) was built up according to the load-bearing mechanism of RC columns and verified by the 5 specimens in this test and 14 SRC columns from parallel tests. Since no obvious strength deterioration and pinch effect were observed from the load-displacement curve, hysteresis rule considering only stiffness degradation was proposed through regression analysis. Compared with the experimental results, the applied analysis model is so reasonable to capture the overall cyclic response of SRC columns that it can be easily used in both static and dynamic analysis of the whole SRC structural systems.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권9호
• /
• pp.881-889
• /
• 2015

해양온도차발전은 해양의 표층수와 심층수의 온도차를 이용하여 발전하는 유기랭킨사이클이다. 작동유체와 사이클 구성은 유기랭킨사이클의 열역학적 효율에 큰 영향을 미치는 요소이다. 본 연구에서는 작동유체와 사이클에 따른 해양온도차발전시스템의 성능분석을 수행하였다. 고전적인 단순 랭킨사이클과 단순 랭킨사이클의 대안으로 제시되고 있는 개방형 및 통합형 재생 랭킨사이클 그리고 칼리나 사이클이 본 연구에서 고려되었으며, 작동유체로는 9종의 단일냉매와 3종의 혼합냉매를 본 연구에 적용하였다. 사이클의 성능분석에는 핀치포인트온도차를 일정하게 유지하는 핀치포인트분석이 적용되었다. 성능분석결과를 살펴보면, 단순 랭킨사이클과 개방형 및 통합형 재생 랭킨사이클의 경우 RE245fa2를 작동유체로 사용하며, 칼리나 사이클의 경우 $NH_3/H_2O$의 질량비가 0.9:0.1일 때 열역학적 효율이 가장 높았다. 한편, 개방형 및 통합형 재생 랭킨사이클과 칼리나 사이클을 해양온도차발전시스템에 적용할 경우 단순 랭킨사이클과 비교하여 각각 약 2.0 %, 1.0%, 10.0%의 효율 향상을 기대할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1404-1406
• /
• 1995

In this paper, argon gas was used for numerical analysis of an arc in a cutting plasma torch driven by constant current. We established nozzle-constricting type torch domain and calculated steady state characteristics of argon arc plasma using the control volume method(CVM). For simplicity, we assumed that the flow field is laminar and the local thermodynamic equilibrium(LTE) prevails in all domain regions. We also neglected cathode-fall and anode-fall effects. Considering magnetic pinch effect and viscosity effect, we solved the momentum equation. Voltage drop in the arc column due to input current was calculated from the temperature field obtained by the energy balance equation.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.143-151
• /
• 2000

Dissolved silica is make some critical trouble at steam turbine. And, we must measure it to ppb level. We were looking for the best measuring method of the silica. Via this study, we could found it in the N-IR spectroscopy technology. This dissertation have been discuss about system structure, system fundamentals and performance test. At the test, we were study in the spectral interference of $NH_3$. We know that existing system had some problem. It is structural frailties of single beam type. Therefore we were study for double beam type structure. And we obtain a good result. In the result, it have been discuss that conduct a test of $NH_3$ effect.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.773-776
• /
• 2003

본 논문에서는 p형 SiGe pMOSFET를 디자인하고 온도에 따른 전기적 특성들을 분석하였다. 채널 길이는 0.9$\mu\textrm{m}$로 하였으며, 온도는 300K와 77K일 때의 특성을 조사하였다. 게이트 전압이 -1.5V로 인가되었을 때, 실온에서는 -0.97V의 문턱전압 값을 얻었으나 77K에서는 -1.15V의 문턱전압 값을 얻었다. 이것은 실온에서의 Si pMOSFET가 갖는 문턱전압 값(-1.36V)보다 동작특성이 우수함을 알 수 있었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.162-163
• /
• 2000

We have observed the short-channel effect, narrow-channel effect and small-geometry effect in terms of a variation of the threshold voltage. For a short-channel effect the threshold voltage was largely determined by the DIBL effect which stimulates more carrier injection in the channel by reducing the potential barrier between the source and channel. The effect becomes more significant for a shorter-channel device. However, the potential, field and current density distributions in the channel along the transverse direction showed a better uniformity for shorter-channel devices under the same voltage conditions. The uniformity of the current density distribution near the drain on the potential minimum point becomes worse with increasing the drain voltage due to the enhanced DIBL effect. This means that considerations for channel-width effect should be given due to the variation of the channel distributions for short-channel devices. For CCDs which are always operated at a pinch-off state the channel uniformity thus becomes significant since they often use a device structure with a channel length of > 4 ${\mu}{\textrm}{m}$ and a very high drain (or diffusion) voltage. (omitted)

• Journal of Welding and Joining
• /
• 제26권4호
• /
• pp.61-65
• /
• 2008

The static force balance model (SFBM) has been used to analyze drop transfer in gas metal arc welding. Although the SFBM is capable of predicting the detaching drop size in the globular mode with reasonable accuracy, discrepancy between the calculated and experimental results increases with current. In order to reduce discrepancy, the SFBM is modified by considering the momentum of the molten metal flow, which is generated by the pinch pressure. The momentum increases with smaller drop size and becomes compatible to the electromagnetic force. The modified force balance model (MFBM) predicts the experimental results more accurately, and extends its application to the projected mode.