• The Research Journal of the Costume Culture
• /
• 제18권1호
• /
• pp.109-117
• /
• 2010

Knit fabrics are created on diverse machines with diverse knit loops and conditions to make different patterns and fabric types. Dimensional modifications of knit fabrics can also be achieved by numerous methods such as different knit-loop structures, different types of yarns, or different finishing processes including heat setting, steaming, chemical treatment et cetera. This research develops and explores sophisticated three-dimensional knit fabrics by combining the several different knit stitches including rib and purl. This study focuses on 3D knit models created on modern electronic weft (flat V-bed) knitting machines which have capability of individual needle selection. Several samples of the 3D knitted fabrics are also examined in this research. This research furthermore suggests new types of knitted fashion garment made by using the interesting physical effects.

• The Research Journal of the Costume Culture
• /
• 제16권3호
• /
• pp.502-517
• /
• 2008

The purpose of the study lies in the measurements of breast shapes and upper body types for the women in their 40's, with the use of 3D measurement system, and in the presentation of brassiere patterns fit for their body types. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The findings of the study indicated that the evaluation of experiment brassieres was excellent in every item, and he significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup art. The pattern comparison showed the differences in the parts of total cup angle, cup circumference length, lower cup height, wing length, and wing angle.

• Journal of Veterinary Clinics
• /
• 제25권5호
• /
• pp.408-410
• /
• 2008

A four months old, 3.6 kg intact female Miniature Dachshund dog was referred for non-weight bearing lameness at right hind limb due to car accident. On physical examination, the patient was non-weight bearing on the right hind leg and had moderate swelling in the proximal to middle tibia region. There was palpable crepitus. Radiographs revealed a slightly displaced, spiral, oblique fracture involving the proximal diaphyseal region of the right tibia. Fibular fracture was also noted. Internal fixation was performed to repair the fracture. Due to bowed shape of fractured tibia, it was not possible to apply K-wire, containing appropriate diameter ($60{\sim}80%$ of bone marrow diameter) for intramedullary fixation. We fixed the bowed tibia fracture using a smaller diameter (30% of bone marrow diameter) K-wire with cross pins and cerclage wires. Four weeks after the operation, radiographs demonstrated healing of the tibia fracture as well as the fibular fracture.

• Journal of Korean Ophthalmic Optics Society
• /
• 제5권2호
• /
• pp.11-14
• /
• 2000

The soft contact lens was very simple technique in handling, good sensation in fitting, good effect of a beauty, and good attachment state on the cornea in physical movement. So that, the subjects have used the correct of visual acuity. If the contact lens handling have not skill, they have acquired the side effect on eye. To analysis of a study of ultrastructure on soft contact lens surface of incubated P. aeruginosa. We have observed the soft contact lens surface by SEM. We have founded the good technical method. On the method of sample process of manufacture, the best observation of samlpe tissue was $OsO_4$ postfixation and tannic acid treatment. In this case, P. aeruginosa was a rod shape and one cilia in ultrastructure and the identification was very good. But, On the process of manufacture have not used the $OsO_4$ and tannic acid treatment, this tissue sample appeared the foreign body materials and artifacts, and the identification of the P. aeruginosa was very difficult.

• Journal of the Korean Applied Science and Technology
• /
• 제33권1호
• /
• pp.23-29
• /
• 2016

Zinc oxide of hexagonal wurzite, is known as n-type semiconductor. It has a wide band gap energy of 3.37 eV and large exciton binding energy of 60 meV. It can be widely applied to gas sensors, laser diodes, dye-sensitized solar cells and degradation of dye waste. The use of microwave hydrothermal synthesis brings a rapid reaction rate, high yield, and energy saving. Amine additives control the different particle shapes because of the chelate effect and formation of hydroxide ion. In this study, zinc nitrate hexahydrate was used as zinc precursor. In addition, ethanolamine, ethylenediamine, diethylenetriamine, and hexamethylenetetramine are used as shape control agent. The pH value was controlled as 11 by NaOH. The shapes of zinc oxide are star-like, rod, flower-like, and circular cone. In order to analyze physical, chemical, and optical properties of ZnO with diverse amine additives, we used XRD, SEM, EDS, FT-IR, UV-Vis spectroscopy, and PL spectroscopy.

• Journal of Drive and Control
• /
• 제11권4호
• /
• pp.15-24
• /
• 2014

It is difficult to analytically derive a volumetric displacement formula for a gerotor hydraulic motor due to the complexity of the geometric shape of its gear lobes. This work proposes an analytical method for the volumetric displacement, a relatively easy method based upon two physical concepts: conservation between hydraulic energy and mechanical shaft energy, and torque equilibrium for the rotor's motion. The first research using these concepts was conducted on inner and outer rotors rotating with respect to each rotor axis. This work represents the second report conducted on an inner rotor revolving as a planetary motion on the stationary outer rotor. The formula equations regarding the volumetric displacement and flow rate are derived, and the proposed formula about the volumetric displacement is proven to be the same as another analytical displacement formula: the so-called vane length method. From the formula, volumetric displacement is calculated for an example geometry of the gear lobes. The resultant displacement is confirmed to be the same as the value calculated from the chamber volume method. The proposed analytical formula can be utilized in the analysis and design of gerotor hydraulic motors. Because it is based on torque equilibrium, this formula can provide a better understanding of torque performance, such as torque ripple, in designing a gerotor type motor.

• Journal of Technologic Dentistry
• /
• 제23권1호
• /
• pp.65-73
• /
• 2001

The purpose of this study was to investigate the microstucture and hardness, corrosion of pure Ti alloy, which is widely used as partial denture frame work these days, depending on the cooling method, followed by casting. The first group was bench cooling at room temperature($18^{\circ}C$), the second group was slowly cooled in the furnace from $700^{\circ}C$ to room temperature, and third. rapidly cooled in $0^{\circ}C$ water. The microstructure of each specimen observed by means of photomicrograph taken by electron microscope, in add to the physical characteristics of each specimen were obtained using the rockwell Hardnest Number. the characteristics of corrosion. The results were obtained as follows: 1. From Potentiodynamic plot. we conclude furnace-cooled specimen had the best stabiltity of passive film and that air-cooled specimen showed similar characteristics. The density of electric current of quenched specimen was the highest, which formed kind of unstable passive film. 2. Specimen cooled at room temperature (air cooling) had the highest value of hardness of 81.26HRB, specimen cooled at ice-water, $0^{\circ}C$, had the value of 78.42HRB, and specimen furnace-cooled at $700^{\circ}C$ had lowest value of 77.1HRB. 3. Quenching treated micro-structure formed martensite structure by and large. In case of air cooling, we could see $\alpha$-structure widmanstatten formed overall. In furnace cooling, widmanstatten structure and various shape $\alpha$-structures forming colony with direction were detected.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제27권2호
• /
• pp.156-162
• /
• 2016

This paper proposes a novel orthogonally-polarized dual-band switchable microstrip antenna. The proposed antenna consists of a perpendicular feeding network and an radiator with a PIN-installed H-shaped slot. When the states of one single PIN diode in H-slot are controlled by bias voltages, the controlled physical geometry of the H-slot determines the operation frequencies of switchable 1.80 GHz and 2.43 GHz for vertically polarized linear polarization and fixed 2.06 GHz for horizontally linear polarization. The implemented antenna experimentally demonstrates reconfigurable dual-band capability by means of controling the states of the PIN diode. The simulation and measurement results of the implemented antenna have been in good agreement with the reflection coefficients, realized antenna gains and far-field radiation patterns at each of the PIN diode states.

• Journal of the Korean Geotechnical Society
• /
• 제15권2호
• /
• pp.181-194
• /
• 1999

Both the chemical components and the physical and mechanical properties of the compacted and undisturbed weathered granite soils were estimated to investigate the influences of the degree of weathering and saturation on the shear strength. The weathered granite soils used in this study were taken from six different sites in Korea. The results showed that the shear strength of weathered granite soil decreased with increasing the degree of weathering and saturation. Under the normal stresses less that 40kPa, the shape of Mohr-Coulomb failure envelope followed curved or hyperbolic relationship and a half of cohesion value obtained by the common shear test was observed. Using the Sueoka's method, the values of CWI were ranged from 21.5 to 31.26 which can be characterized as a completely weathered granite soil. Large decrease in shear strength and remarkable variation in dilatancy were observed in saturated granite soil compared to unsaturated soil. It was also found that the shear strength of undisturbed weathered granite soil of Pungam site can be expressed approximately by the equation of ${(\tau)_{sat}= 1.0(\tau)_{unsat}-12.48}$ and this equation can be extended to the other sites considered in this study.

• Resources Recycling
• /
• 제16권5호
• /
• pp.36-40
• /
• 2007

Platinum plays an important role in many applications because of its extraordinary physical and chemical properties. All these applications require the use of platinum in the finely divided state. Therefore the preparation of platinum nanoparticles by reducing platinum-surfactant salt with reducing agent in the solution was investigated in this study. The net interaction between C14TABr and $H_2[PtCl_6]$ in aqueous solution results in the formation of $[C14TA]_2[PtCl_6]$. The concentration of C14TABr and the concentration of $H_2[PtCl_6]$ has to be above cmc and 0.32 mM, respectively in order to obtain complex-micelle aggregation for mono dispersed Pt particles. Pt particle size increases with increasing $H_2[PtCl_6]$ and C14TABr concentration. And the shape of Pt particles was well controlled with increasing surfactant concentration.