• 한국약용작물학회지
• /
• 제9권1호
• /
• pp.76-82
• /
• 2001

고추냉이 물재배에서 토양의 배지조성이 고추냉이의 생육 및 수량에 미치는 영향을 구명하기 위해 시험한 결과 토양의 입경 조성은 일본에 비하여 마사토, 강모래에서는 2mm 이상의 자갈 함량이 적었고 조사의 분포가 많았다. 토양경도는 마사토와 강모래에서 상층은 $11.3{\sim}12.9$, 하층은 $12.5{\sim}15.1$ 사이에 분포하였으나, 난석에서 상층은 $5.5{\sim}5.8$, 하층은 $6.2{\sim}7.0$ 사이에 분포하여 난석의 경도가 가장 낮았다. 근계 분포는 경도가 낮은 난석에서는 좁고 깊게 분포하였으나, 경도가 높은 마사토, 강모래에서는 넓고 말게 분포하였다. 근경중은 난석에서 입수구 쪽은 766kg/10a, 퇴수구 쪽은 649kg/10a, 마사토에서 입수구 쪽은 338kg/10a, 퇴수구쪽은 334kg/10a, 강모래에서 입수구 쪽은 451kg/10a, 퇴수구 쪽은 332k9/10a로 난석 대비 입수구 쪽은 마사토 44%, 강모래 59%, 퇴수구 쪽은 마사토, 강모래 각각 51% 수준이었다.

• Tribology and Lubricants
• /
• 제28권1호
• /
• pp.33-37
• /
• 2012

Automotive wheel bearing grease helps to reduce stresses and prevent wear of wheel bearings. But it is easily contaminated by water and other contaminants. Previously, our research group reported the change of grease physical properties such as dropping point, work penetration and oxidation work stability, water washout characteristics, leakage tendency, oil separation, evaporation loss and rust protection by water contamination. In this paper, we analyzed the physical characteristics of grease such as lubricity, viscosity and total acid number to investigate the mechanism of thickener decomposition. In water contaminated grease, the total acid number and wear scar were increased, the viscosity was decreased due to the decomposition of lithium complex thickener.

• 한국세라믹학회지
• /
• 제49권1호
• /
• pp.29-36
• /
• 2012

In many applications of functional oxides originally homogeneous materials are exposed to gradients in the chemical potential of oxygen. Prominent examples are solid oxide fuel cells (SOFCs) or oxygen permeation membranes (OPMs). Other thermodynamic potential gradients are gradients of electrical potential, temperature or uni-axial pressure. The applied gradients act as generalized thermodynamic forces and induce directed fluxes of the mobile components. These fluxes may lead to three basic degradation phenomena of the materials, which are kinetic demixing, kinetic decomposition, and morphological instabilities.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.22-25
• /
• 2005

열용량분석기(TGA)를 사용하여 고온에서의 탄소/페놀릭 복합재료의 열분해를 연구하였다. 온도상승 속도는 5, 10, 15, 30 그리고 $50^{\circ}C/min$ 이었으며 온도 상승속도가 증가할수록 최대 열분해 반응의 온도도 상승하였다. 열분해반응에서 얻어진 자료를 근간으로 물리-수학적인 모델을 제시하였으며 모델의 실효성을 판단하기 위하여 고체 추진기관 노즐의 연소시험을 통하여 내부 온도 분포 및 밀도 분포 자료를 해석 모델과 비교하였다. 향후 연구를 통하여 이러한 열분해 인자는 고체 추진기관의 열 및 구조 해석의 입력 자료로 활용이 될 것이다.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.415-423
• /
• 2011

HI decomposition step certainly demand catalytic reaction for efficient production of hydrogen in SI process. Platinum catalyst can apply to HI decomposition reaction as well as hydrogenation or dehydrogenation. Generally, noble metal is used as catalyst which is loaded form for getting high dispersion and wide active area. In this study, Pt was loaded onto zirconia, ceria, alumina, and silica by impregnation method. HI decomposition reaction was carried out under the condition of $450^{\circ}C$, 1atm, and $167.76h^{-1}$ (WHSV) in a fixed bed reactor for measuring catalytic activity. And property of a catalyst was observed by BET, TEM, XRD and chemisoption analysis. On the basis of experimental results, we discussed about conversion of HI according to physical properties of the loaded Pt catalyst onto each support.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.111-114
• /
• 2001

Thermal desorption process is valuable for the remediation of oil contaminated site. The system is physical separation process by volatizing oil contaminants from soil matrixes and is not designed to provide high levels of oil destruction. The process is not incineration, because the decomposition of oil materials is not the desired result, although some decomposition may occur. The physical and chemical properties that influence the design and operation of the system include boiling points, soil sorption characteristics, aqueous phase solubility, thermal stability, contaminating oil concentration, moisture contents, particle size distribution and etc.

• 한국수소및신에너지학회논문집
• /
• 제26권6호
• /
• pp.507-515
• /
• 2015

HI decomposition reaction requires a catalyst for the efficient production of hydrogen as a key reaction for hydrogen production in sulfur-iodine thermochemical water-splitting (SI) cycle. As a catalyst used in the reaction, the performance of platinum catalyst is excellent. While, the platinum catalyst is not economical. Therefore, studies of a nickel catalyst that could replace platinum have been carried out. In this study, the characteristics of the catalytic HI decomposition on the amount of loaded nickel (Ni = 0.1, 0.5, 1, 3, 5, 10 wt%) were investigated. As the supported Ni amount increased up to 3 wt%, HI decomposition was found to increase in linear proportion. However, the conversion of $Ni/Al_2O_3$ catalyst loaded above 3 wt% was not linear. It was thought that the different HI decomposition characteristics was caused in the size and metal dispersion of Ni particles of catalyst. The physical property of catalyst before and after HI decomposition reaction was characterized by BET, chemisorption, XRD and SEM analysis.

• 한국의류학회지
• /
• 제22권4호
• /
• pp.431-441
• /
• 1998

Polyester microfiber fabrics were decomposed at 100, 110, 120 and 140 t of temperature and 0.5, 1.0 and 1.5% of sodium propyleneglycolate/propyleneglycol solution(SPG-PG). Characteristic decomposition feature and physical and chemical properties of the decom- posed PET microfiber fabrics were discussed. The activation energy was 18.77 kcal/mol and the dyeability of the decomposed PET microfiber fabrics was found to be improved as it was supported by the examined K/S values. Up to the 20% of the weight loss of the PET microfiber fabrics, K/S values incresed with increasing the weight loss. The melting temperature of PET microfiber fabrics decomposed by SPG-PG showed no fundamental change. Tensile strength of the decomposed PET microfiber fabrics decreased linearly in accordance with the increased the weight loss of the PET microfiber fabrics. The moisture regain and the tactilities increased in accordance with the increased the weight loss of the PET microfiber fabrics.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.433-439
• /
• 2005

This paper describes a reinforced concrete crack model, which utilizes a strain decomposition technique. The strain decomposition technique enables the explicit inclusion of physical behavior across the cracked concrete surface such as aggregate interlock and dowel action rather than intuitively defining the shear retention factor. The proposed concrete crack model is integrated into the commercial finite element software ABAQUS shell elements through a user-supplied material subroutine. The FE results have been compared to experimental results reported by other researchers. The proposed bridge FE model is capable of predicting the initial cracking load level, the ultimate load capacity, and the crack pattern with good accuracy.

• Journal of applied mathematics & informatics
• /
• 제10권1_2호
• /
• pp.193-207
• /
• 2002

The present investigation deals with the pulsatile flow of incompressible viscous fluid through a circular rigid tube provided with constriction. The method applied here is the Decomposition Method, which has been developed by George Adomian [3]. The advantages of this method are the avoidance of simplifications and restrictions, which change the non-linear problem to mathematically tractable one, whose solution is not consistent with physical solution. Theoretically results, such as, wall shear stress and axial velocity component, have been obtained and the graphical solutions of these theoretical results have been shown in the figures.