DOI QR코드

DOI QR Code

Decomposition of Thickener in Grease by Water Contamination

수분오염에 따른 그리스 내 증주제 분해 연구

  • Lim, Young-Kwan (Fuel Technology R&D Center, Korea Institute of Petroleum Management) ;
  • Ham, Song-Yee (Fuel Technology R&D Center, Korea Institute of Petroleum Management) ;
  • Lee, Joung-Min (Fuel Technology R&D Center, Korea Institute of Petroleum Management) ;
  • Jeong, Choong-Sub (Fuel Technology R&D Center, Korea Institute of Petroleum Management)
  • 임영관 (한국석유관리원 녹색기술연구소) ;
  • 함송이 (한국석유관리원 녹색기술연구소) ;
  • 이정민 (한국석유관리원 녹색기술연구소) ;
  • 정충섭 (한국석유관리원 녹색기술연구소)
  • Received : 2011.11.25
  • Accepted : 2011.12.21
  • Published : 2012.02.28

Abstract

Automotive wheel bearing grease helps to reduce stresses and prevent wear of wheel bearings. But it is easily contaminated by water and other contaminants. Previously, our research group reported the change of grease physical properties such as dropping point, work penetration and oxidation work stability, water washout characteristics, leakage tendency, oil separation, evaporation loss and rust protection by water contamination. In this paper, we analyzed the physical characteristics of grease such as lubricity, viscosity and total acid number to investigate the mechanism of thickener decomposition. In water contaminated grease, the total acid number and wear scar were increased, the viscosity was decreased due to the decomposition of lithium complex thickener.

Keywords

References

  1. Lim, Y. K., Lee, E. H., Lee, J. M., and Jung, C. S., "Performance of Automotive Wheel Bearing Grease by Water Contents", Journal of the KSTLE, Vol. 27, No. 5, pp. 275-280, 2011. https://doi.org/10.9725/kstle.2011.27.5.275
  2. E. Richard Brooser, Handbook of lubrication, Theory and practice of tribology, Vol. II, Theory & Design, CRC Press.
  3. 사단법인 일본트라이볼로지학회 공저, "ISO 18436-4규격에 따른 기계설비의 상태감시와 진단(트라이볼로지 영역1)".
  4. ASM Handbook, Friction, lubrication and wear technology, Vol. 18, Metal Park, OH: ASM International; 1992.
  5. Kim, J. Y., Chung, K. W., Kim, Y. W., and Jo, W. H., "Anti-wear Performance and Life Evaluation of Wheel Bearing Type Greases", KSTLE 추계학술대회 논문집, pp. 111-116, 2004.
  6. Business act for quality standard inspection method and inspection fee for petroleum product, Ministry of Commerce, Industry and Energy, 2010-236.
  7. Huh, Y. M., Lee, K., Sim, T. Y., and Kang, S. S., "Study on Geometry Design of Lip-seal for Automobile Wheel Bearing Drag Torque and Sealing Performance", Transaction of KSAE, Vol. 15, No. 4, pp. 10-16, 2007.
  8. Stevens, Malcolm P., Polymer Chemistry: An Introduction 3rd Ed., pp. 68-70, 1999.

Cited by

  1. Effect of Water Content on Tribological Characteristics of Grease vol.33, pp.1, 2016, https://doi.org/10.7736/KSPE.2016.33.1.37