• Food Science and Biotechnology
• /
• 제15권2호
• /
• pp.168-172
• /
• 2006

Soy sauce was fermented at $20^{\circ}C$ for 100 days in onggi containers (ethnic Korean earthenware) which had been fabricated using three different glazing treatments: unglazed, glazed only on the outside, and glazed on both surfaces. The changes in microstructure and permeability characteristics of onggi containers were examined after fermentation of soy sauce. The effect of repeated use of onggi containers on the fermentation was analyzed by the contact between an aqueous model solution and the onggi containers used once for soy sauce fermentation. The levels of reducing sugar and free amino acids produced from the dissolved starch and protein, respectively, in the solution were compared between the new and reused onggi containers. The moisture permeance and gas permeabilities of the onggi jars were progressively reduced with continuing use for soy sauce fermentation, probably due to clogging of micropores by solid materials. After having been used once for fermentation, the microbial cells and/or enzymes immobilized on the surface or in the micropores of the onggi containers seemed to contribute to accelerating the hydrolytic reactions of starch and protein.

• 동력기계공학회지
• /
• 제17권5호
• /
• pp.13-22
• /
• 2013

This paper reports the investigation of the physical and chemical characteristics of the prepared 3Pt-2MgO-$3ZrO_2$-$2CeO_2/Al_2O_3$ DOC, based on its hydrothermal aging. As a result of impregnating and reducing the $H_2PtCl_6$ $6H_2O$ precursor on a ${\gamma}-Al_2O_3$ basis, it was well dispersed into small particles with the range 2-3nm. This was because the $Al_2O_3$ acted as a barrier to prevent movement of the catalyst particles. For a hydrothermally aged catalyst for 9h at $700^{\circ}C$, its performance when purifying harmful gases decreased compared to a fresh catalyst, but its specific surface area was at the same level. This was because the performance of the catalyst was reduced by the sintering of the precious metal Pt, rather than by washcoat sintering and pore clogging. For an excessively hydrothermally aged catalyst for 9h at $850^{\circ}C$, Pt grew into an approximately 50nm class, formed a cluster compared to a fresh catalyst. The $CeO_2$ promoters also formed clusters among components of the same type, reducing their specific surface area to $114m^2/g$, which was 14% less than a fresh catalyst.

• 한국세라믹학회지
• /
• 제54권6호
• /
• pp.478-483
• /
• 2017

The advantage of ceramic ink-jet printing technology is the accurate and fast printing process of digital images for various products. For digital ink-jet printing applications, ceramic ink requires proper viscosity and surface tension, along with dispersion stability of the inorganic pigments. The purpose of this study is the formulation of an environment-friendly ceramic ink with a water-based system; using nano-sized $CoAl_2O_4$ pigment as a raw material, ink should have dispersion stability to prevent nozzle clogging during ink-jet printing process. In addition, the surface tension of the ceramic ink was optimized with the polysiloxane surfactant according to the surface tension requirement (20 - 45 mN/m) for ceramic ink-jet printing; by adjusting the viscosity with poly ethylene oxide, jetting behavior of the ceramic ink was investigated according to changes in the physical features through drop watcher measurement.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4033-4041
• /
• 2021

To better understand the permeability of uranium sandstone, improve the leaching rate of uranium, and explore the change law of pore structure characteristics and blocking mechanism during leaching, we systematically analyzed the microstructure of acid-leaching uranium sandstone. We investigated the variable rules of pore structure characteristics based on nuclear magnetic resonance (NMR). The results showed the following: (1) The uranium concentration change followed the exponential law during uranium deposits acid leaching. After 24 h, the uranium leaching rate reached 50%. The uranium leaching slowed gradually over the next 4 days. (2) Combined with the regularity of porosity variation, Stages I and II included chemical plugging controlled by surface reaction. Stage I was the major completion phase of uranium displacement with saturation precipitation of calcium sulfate. Stage II mainly precipitated iron (III) oxide-hydroxide and aluminum hydroxide. Stage III involved physical clogging controlled by diffusion. (3) In the three stages of leaching, the permeability of the leaching solution changed with the pore structure, which first decreased, then increased, and then decreased.

• 한국식품저장유통학회지
• /
• 제12권3호
• /
• pp.292-298
• /
• 2005

발효식품 담금 용기로 사용되고 있는 유리, polypropylene(PP), polyethylene terephthalate(PET), 스테인레스 용기, 옹기에 고추장을 담아 $30^{\circ}C$에서 4개월 동안 발효하는 동안 물리적, 화학적, 미생물적인 품질변화를 측정하여 담금 용기의 효과를 비교 평가하였다. 높은 기공성을 가진 옹기는 다른 용기에 비해 전체 발효기간에서 높은 호기성 세균수, 젖산균수, 효모수를 보여서 가장 왕성한 발효진행을 보였으며, 이와함께 높은 protease 활성을 유지시키고, 아미노태 질소와 유리 아미노산을 생산하였다. 아울러 옹기에 담금 한 고추장에서는 높은 총산함량과 낮은 pH를 얻게 하였으며, 환원당도 많이 생성시켰다. 이러한 변화는 발효 $2{\sim}3$개월에 완성되어졌다. 하지만 높은 기공성에도 불구하고 옹기에서 발효된 고추장은 타용기구에 비해서 수분손실과 염도상승은 현저하지 않았는데, 이는 시간의 경과에 따라 옹기벽면에서의 기공이 고추장 성분에 의하여 일부 닫혀짐에 의한 것으로 해석된다. 이러한 성분변화의 결과로 인하여 옹기에서 발효된 고추장은 관능적인 품질에서 타 용기처리구에 비해 유의적으로 우수하였다.

• 한국농공학회논문집
• /
• 제60권2호
• /
• pp.103-110
• /
• 2018

Most of the intake facilities of small agricultural reservoirs are conduits and they are regarded as serious defects due to the structural weakness that penetrates the body of the dam, and countermeasures are needed. This study suggests the application method of siphon type water intake facility by hydraulic model test and physical scale model test of siphon type water intake facility which has high safety and easy maintenance. Experimental results show that sufficient flow rate can be secured for the purpose of intaking water according to the differential head between the reservoir and the discharge part, and the flow rate can be controlled by the valve. The negative pressure was -31.5 kPa, and vibration and noise did not occur during the operation of the siphon. The maximum flow velocity in the discharge outlet was 1.11 m/s which meets the criterion for irrigation canals. Therefore, scour risk would be very low. As a result of the inflow distribution experiment, even if the inflow part is separated by only about 0.8 m, the flow velocity is remarkably decreased, so that the clogging by debris would not appear. When the pump was operated only once for the first time and the inside of the siphon was filled with water, continuous operation was possible by only valve operation. The results of this study are expected to be used for the design guidelines of the water intake facilities and improve safety and maintenance convenience of agricultural reservoirs.

• 지질공학
• /
• 제27권4호
• /
• pp.439-449
• /
• 2017

경기도 안성천 유역에 설치된 강변여과수 시설의 취수량 감소 원인에 대하여 4개 수평정(1, 4, 6, 7번) 주변의 대수층 매질 특성, 수리전도도의 분포 등을 토대로 검토하였다. 시험 양수 기간 동안 1번 수평정은 $12.4m^3/d/d$, 4번은 $2.3m^3/d/d$, 6번은 $24.4m^3/d/d$, 7번은 $187.3m^3/d/d$의 경향으로 7번 수평정의 취수량 감소가 뚜렷하였다. 7번 수평정 주변은 국지적으로 수리전도도가 매우 낮은 구간이 존재하며, 전체적으로 균등 계수가 크고 수평 깊이별로 균등계수의 차이가 심하여 세립분의 이동에 의한 공극 막힘이 발생한 것으로 평가된다. 또한, 철 이온($Fe^{2+}$) 농도가 높아 양수 및 주입시 철산화물이 형성되면서 clogging을 야기하는 것으로 보인다. 향후 장기 양수 과정에서 대수층의 물리특성 및 수질 특성 변화를 분석한다면 취수량 감소에 대한 정확한 원인 규명이 가능할 것이다.

• Spatial Information Research
• /
• 제22권2호
• /
• pp.53-62
• /
• 2014

Floor Field Model(FFM)은 실내에서 보행자의 움직임을 모델링하기 위한 CA기반 미시적 보행모델이며, static과 dynamic floor field를 이용하여 보행자의 움직임을 표현해낸다. 다만, 실제 보행자의 크기와 모양은 타원체나 직사각형과 유사한데, FFM에서는 정사각형 형태의 보행자를 설정하고 있다. 이로 인해 보행자들의 회전효과 부여에 어려움이 있으며, 보행자들끼리 발생하는 충돌, 끼임 등의 영향을 반영하기에 한계가 있다. 또한, 보행자의 자세 시야의 변경에 따른 영향들도 효과적으로 반영되고 있지 않다. 본 연구에서는 FFM이 가진 한계점을 개선하기 위해 보행자의 크기, 모양 등의 물리적 특성을 반영한 보행모델을 제시한다. 본 모델에서는 정사각형이 아닌 직사각형 형태로 보행자를 정의하며, 한국인의 실제 신체크기에 가깝도록 하였다. 또한, 보행자의 자세정보를 추가하였으며, 보행자들 간에 발생하는 충돌, 끼임 등의 영향을 반영할 수 있도록 정의하였다. 제안된 모델을 이용한 시뮬레이터를 개발하였으며, 개선된 모델과 기존 모델간의 비교 분석을 통해 차이점을 분석하였다. 이를 통해 기존 모델에서 발생하던 dynamic value 적용문제의 해결과 대피상황에서 발생하는 패닉현상의 반영을 확인할 수 있었다.

• 멤브레인
• /
• 제33권4호
• /
• pp.191-200
• /
• 2023

Polyethersulfone (PES)은 친수성과 상분리법의 용이성 덕분에 수처리 및 정제 분야에서 정밀여과 및 한외여과막 소재로 일반적으로 사용된다. 그러나, 비용매 유도 상분리법으로 제조된 PES 분리막, 특히 지지체가 없는 여과막의 경우 도프의 조성과 기재의 특성에 따라 여과막 하부에 낮은 기공도를 갖는 치밀층이 형성되기 쉽고, 이러한 치밀층으로 인해 수투과 저항이 증가하고 오염물질의 쌓임에 의한 막오염이 일어난다. 본 연구에서는 PES 여과막 제조 시 상전이 과정의 수축으로 인해 분리막 하부에 물이 침투하여 치밀층을 형성, 심각한 막오염을 유발할 수 있음을 확인하였다. 동일한 선택층을 갖는 PES 여과막을 단일층 및 이중층 캐스팅법으로 각각 제조하여 하부 치밀층이 여과막의 투과성능 및 막오염에 미치는 영향을 파악하고자 하였다. 하부 치밀층이 없는 이중층 캐스팅된 여과막은 기존 여과막 대비 높은 투과성능 및 막오염에 대한 저항성을 보였으며, 이를 통해 다공성 여과막의 내오염성을 향상시키기 위한 표면 기공도 및 기공 구조 등 물리적 구조의 최적화가 중요함을 확인하였다.

• 상하수도학회지
• /
• 제14권1호
• /
• pp.37-44
• /
• 2000

Laboratory experiments were conducted to investigate the performances of anaerobic filters packed with ceramic tube and pall-ring media treating a dairy waste. The media packing volume was 65% of effective volume of anaerobic filter. Organics removals of anaerobic filters were maintained above 80% even at an organics loading rate of $10kgCOD/m^3/d$, and this was comparable to aerobic treatment of organic wastes. Organics removals of the ceramic tube anaerobic filters were always lower than those of the pall-ring anaerobic filters due to intrinsic physical property of ceramic tube, especially lower void space which caused to clogging and entrapment of biogas, substrate transfer limitation, and irregular evolution of biogas leading to loss of solids and biomass. This was clearly observed in higher concentration of TSS in the effluent from the ceramic tube anaerobic filter despite of higher retention capacity of TSS compared with pall-ring media. Vertical distribution of organics and solids in the filters showed above 90% of organics and solids in influent were removed below 20% of reactor height, and 50% of remaining organics and solids were removed though media packing zone. Effluent quality from the anaerobic filter was heavily depended on media itself as well as suspended biomass formed below media. It is therefore concluded that the type of media played an important role in biomass accumulation arid gas-liquid-solid separation efficiency. Type of media did not affect the start-up behaviors of the anaerobic filter, and supernatant from anaerobic digested sludge showed a good performance as a seeding materials.