• 터널과지하공간
• /
• 제13권3호
• /
• pp.215-224
• /
• 2003

자연 상태에서의 물리적 풍화를 실험적으로 재현하기 위해서 동결-응해 시험을 실시하였다. 시험 과정에서 탄성파 속도, 흡수율, 무게 및 부피 변화 등의 물리적 성질을 측정하였으며, 시험 전 및 시험 종료 후에 일축압축시험을 실시하여 강도 및 탄성 계수의 변화도 조사하였다. 시료의 무게 및 부피 변화는 풍화의 진전 정도와 명확한 상관관계를 보이지 않았으나 탄성파 속도와 일축압축강도 및 탄성계수는 풍화가 진행되면서 감소함을 보였다. 시험 결과는 암반 사면의 장기적 안정성 평가에 이용될 수 있을 것으로 기대된다.

• 한국식품영양과학회지
• /
• 제22권3호
• /
• pp.328-333
• /
• 1993

대표적 유지종자원료인 대두, 목화씨, 땅콩, 해바라기씨 탈지박에 지방을 제거한 후 건조시킨 쇠고기를 5~20%의 첨가함량범위로 섞어 가압사출방법을 이용하여 성형시킨 제품의 기능적 성질을 포함한 물리적 특성을 조사하였다. 가압사출이 가능한 원료의 수분 및 지방함량의 범위내에서 쇠고기 단백질의 첨가량을 늘리고 또 원료를 균일하게 혼합하기 위해 쇠고기의 지방을 혼합유기용매로 추출한 후 건조시켜 원료로서 사용하는 방법을 시도하였다. 식물성 및 동물성 단백질을 동시에 가압사출시킨 제품의 팽창정도, 밀도, 조직특성, 수화능력, 색 등은 가압사출기의 작동이 원활하게 이루어지는 것으로 확인된 20%의 첨가범위 이내에서 동물성단백질의 첨가함량보다 유지종자품종에 따라 더 많은 영향을 받았다.

• 한국염색가공학회지
• /
• 제18권4호
• /
• pp.11-19
• /
• 2006

Black-dyed PET fabrics were sputtered with stainless steel through DC-magnetron type device to investigate the possibility of coloration effect, and then considered the morphological structure and physical characteristics such as water permeation ability and washing fastness. Change in color was estimated on the basis of CIELAB color system. The color coordination of metal plated PET was shifted to yellow-red from red-blue. Colour difference$({\Delta}E^*)$ was increased by sputtering conditions with increasing ion current and treatment time. Especially, $Lightness(L^*)$ value of PET was remarkably increased by sputtering, whereas $Chroma(C^*)$ increased gradually. From SEM analysis, rough and uneven craters were found and thickened on the fiber surfaces with longer sputtering time. And washing fastness was a little poor and absorption ability slightly decreased. There were little changes of breaking load and breaking extension. It was evident that observed uneven craters in the plated thin layer resulted in the colour change of PET fabrics by sputtering treatments.

• 한국식품영양과학회지
• /
• 제30권1호
• /
• pp.56-63
• /
• 2001

This study investigated the quality characteristics of yeast breads with addition of hot air-dried yam powder (HDYP) and freeze-dried yam powder (FDYP), using several physical and sensory examinations. Breads were made of imported wheat flour (IWF) or Korean wheat flour (KWF). HDPY and FDYP were added to the bread formula at three levels of 3, 5, and 7%. The addition of yam powders required an increase of water absorption. As the addition of HDYP/FDYP increased, IWF dough stickiness increased and thus handling property became inferior to the control. Especially, handling property of KWF bread dough containing FDYP was most poor among the dough samples. With HDYP/FDYP, final volumes of bread made from IWF were similar to the control when 3~5% HDYPs were added whereas loaf volumes decreased significantly as the amount of added FDYP increased, indicating volume depressing effect. In bread scoring, texture scores increased when yam powders were added that hardness, chewiness, cohesiveness and guminess of KWF bread increased as the amounts of yam powders increased. The "L" value of IWF bread crumb decreased with the addition of yam powders. From sensory evaluation using acceptability scores, the results gave us that appearance, grain, texture, flavor, taste and overall acceptability of KWF bread could be more improved with the addition of yam powders than those of IWF bread.IWF bread.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.455-458
• /
• 2002

In this paper, the physical and volume resistivity properties of cross-linked polyethylene (XLPE) for ultra-high voltage investigated due to temperature dependence, and the measurement of volume resistivity used to highmegohm meter is measured from 1 to 30 minutes when the each applied voltage, for example, DC 100[V], 250[V], 500[V] and 1000[V] is applied, according to the step voltage application method. From FT-IR spectrum as an analysis of physical properties, a strong absorption in wavenumbers 700 to 730[$cm^{-1}$ /], 1456[$cm^{-1}$ /] and 2700 to 3000 [$cm^{-1}$ /] observed by the methyl groups(CH$_2$). From the analysis of DSC, the crystalline melting points of the specimen observed in the temperature 60[$^{\circ}C$] and 106.58[$^{\circ}C$].

• International Journal of Concrete Structures and Materials
• /
• 제9권3호
• /
• pp.295-306
• /
• 2015

Simulating natural leaching process for cementitious materials is essential to perform long-term safety assessments of repositories for nuclear waste. However, the current test methods in literature are time consuming, limited to crushed material and often produce small size samples which are not suitable for further testing. This paper presents the results from the study of the physical (gas permeability as well as chloride diffusion coefficient) and mechanical properties (tensile and compressive strength and elastic modulus) of solid cementitious specimens which have been depleted in calcium by the use of a newly developed method for accelerated calcium leaching of solid specimens of flexible size. The results show that up to 4 times increase in capillary water absorption, 10 times higher gas permeability and at least 3 times higher chloride diffusion rate, is expected due to complete leaching of the Portlandite. This coincides with a 70 % decrease in mechanical strength and more than 40 % decrease in elastic modulus.

• 한국의류학회지
• /
• 제18권3호
• /
• pp.287-297
• /
• 1994

The purpose of this study is to investigate the Improvement of fiber surface, tenacity & elogation, fabric counts, thickness, handle, moisture regain, static voltage, handle, dyeability when polyester fabrics are treated with NaOH solution adding quartemary ammonium salt (Benzyl dimetyl dodecyl ammonium chloride . BDMDAC) The results are as follows. I. In regard to the method of processing VET, when the PET fabrics are alkaline-hydrolyzed adding BDMDAC, the weight loss of PET fabrics increased remarkably to the increse of BDMDAC concentration than when they are treated only in NaOH solution. When PET fabrics are alkaline-hydrolyzed the amount of BDMDAC as the catalyst is proper lg/1 II. The change in physical & chemical properties of alkaline-hydrolyzed PET fabrirs. 1. As the amount of the weight loss on PET fabrics increased, the void space of the PET yale increased but tenacity & elongation and thickness decreased. 2. The fabric counts of PET increased due to shrinkage by alkaline-hydrolydzing. 3. As the amount of of the weight loss on PET fabrics increased. NUMERI, FUKURAMI, increaseed and KOSHI decreased and Total hand value(T.H.V) in all cases increaseed. When the weight Ioss is 30.9% T.H.V. is best. 4. Moisture regain of PET fabrics a little increased by alkaline-hydrolyzing treatment. As the weight loss increased, static voltage is decreased. 5. The last dye absorption is different according to the degree of the Affinity. In regard to the difference of dye color, the dyestuff of low molecular weight dyed for deep color.

• 한국염색가공학회지
• /
• 제17권5호
• /
• pp.1-12
• /
• 2005

Polyester fibers can be modified into cationic dyeable polyester fibers(CDP) by the copolymerization of terephthalic acid and 5-sodium sulphoisophthalic acid with ethylene glycol. The advantage of CDP on most cationic dyes is the conspicuous brilliance due to a narrow steep absorption band and the wash fastness and etc. Weight reduction by alkali hydrolysis, dyeing and solvent wicking properties of fabrics with cationic dyes, and change of fine structure were investigated. To obtain optimum splitting process parameters for dyeing and physical properties of micro CDP fiber, splitting method under various conditions was carried out. By means of SEM, it was confirmed that the splitting process of the micro CDP fiber be achieved at the weight reduction. A comparatively greater quantity of dye is necessary to dye microfiber than conventional fiber. The fastness and solvent wicking of regular CDP fiber is higher than that of micro CDP fiber.

• 화약ㆍ발파
• /
• 제22권2호
• /
• pp.33-43
• /
• 2004

풍화암은 일반적으로 6단계로 분류된다. 본 연구에서는 풍화도에 따라 등급 I에서 등급 V의 암석 블록을 장수지역에서 채취하였다. 등급 VI는 본 연구대상에서 제외되었다. 풍화도의 증가에 따른 화학적 풍화지수의 변화량은 물리적, 역학적 물성변화에 비하여 매우 미소한 변화를 보였으며, 풍화도의 증가는 강도, 경도, 탄성파속도, 내구성과 같은 물리적 역학적 물성에 의하여 잘 지시되었다. 특히 흡수율과 공극률은 매우 좋은 지수이다. 풍화의 진행에 따라, 암석에 포함되어 있는 크랙의 양은 암석의 변형에 영향을 끼친다. 그러므로 풍화암의 응력변형률 곡선은 신선한 암과 상당한 차이를 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1722-1724
• /
• 1996

Enhancing the electrical conductivity of the ultrathin organic films is one of the important factors for the development of molecular electronic devices. The Langmuir-Blodgett(LB) technique has recently been attracted as out of the ways of deposition ultrathin films. We have studied manufacturing conditions and physical properties of Hexadecyl Dipyridinium-$(TCNQ^-)_2$ LB films made by Kuhn type apparatus. A ${\pi}-A$ isotherm shows that a limiting area is around $180{\AA}^2/molecule$ and a proper surface pressure for a deposition is around 22mN/m. A transfer ratio shows that Hexadecyl Dipyridinium-$(TCNQ^-)_2$ is able to be deposited as an Y-type. UV /visible absorption spectra shows that TCNQ dimer peak is apeared at about 600nm in LB films. In solution, $TCNQ^-$ peak is observed at about 400nm and charge transfer band at $830{\sim}900nm$. A horizontal conductivity of the Hexadecyl Dipyridinium-$(TCNQ^-)_2$ LB film is about $10^{-7}(S/cm)$.