A Study of Engineering Properties and Deformation Behavior of Weathered Rock Mass

풍화 암반의 공학적 특성 및 변형거동에 관한 연구

  • Published : 2004.06.01

Abstract

The six grades weathering system is normally used in weathered rock classification. In this study. fresh and weathered rock block of grade I to V were sampled in Jang-soo ana but samples of the grade VI was omitted from this study. The variation quantities of chemical weathering indices with weathering degree are smaller than those of physical and mechanical properties. Increase of Weathering degree is well indicated by physical and mechanical properties such as strength, hardness, ultrasonic velocity and slake durability result. Especially, absorption and porosity ratio is a good indicator. As weathering proceeds. a number of the cracks affect the rock deformation. Therefore, stress-strain curves of weathered rocks in unconfined state are quite different from ones of fresh rocks.

풍화암은 일반적으로 6단계로 분류된다. 본 연구에서는 풍화도에 따라 등급 I에서 등급 V의 암석 블록을 장수지역에서 채취하였다. 등급 VI는 본 연구대상에서 제외되었다. 풍화도의 증가에 따른 화학적 풍화지수의 변화량은 물리적, 역학적 물성변화에 비하여 매우 미소한 변화를 보였으며, 풍화도의 증가는 강도, 경도, 탄성파속도, 내구성과 같은 물리적 역학적 물성에 의하여 잘 지시되었다. 특히 흡수율과 공극률은 매우 좋은 지수이다. 풍화의 진행에 따라, 암석에 포함되어 있는 크랙의 양은 암석의 변형에 영향을 끼친다. 그러므로 풍화암의 응력변형률 곡선은 신선한 암과 상당한 차이를 보였다.

Keywords

References

  1. 김규봉 외 3, 1984, 오수도폭 지질보고서 한국동력자원연구소
  2. 신희순 외 1, 1986, 함수 및 온도에 따른 암석의 탄성파 전단속도와 동탄성계수의 변화에 관하여, 대한광상학회지, 재 23권 pp282-391
  3. 임걸재, 2000, 화강암류의 풍화특성에 관한 연구, 학위논문(박사), 강원대학교 대학원, 103-113
  4. 이수곤 외 1, 1995, 슈미트해머 수치를 이용한 한국 화강암의 일축압축강도 추정방법, 대한토목학회논문집, 제15권, pp199-210
  5. Anon, 1981, 'Basic geotechnical description for rock masses, International Society for Rock Mechanics, Commision on the Rock classification of Rocks and Rock masses.' Int. J. Rock Mech. Min. & Sci. Abstr., vol 18, pp.85-110
  6. Goodman, R.E., 1976, Methods of Geological Engineering in Discontinuous Rocks. pp.27-53
  7. Gupta, A.S, K. Seshagiri Rao, 2000, Weathering effects on the strength and deformational behaviour of crystalline rocks under uniaxial compression state. Engineering Geology, 56, pp.257-274
  8. ISRM, 1978, International Society for Rock Mechanics Commission on Standardization of Laboratory and Field Tests, Int. J. Rock Mech. & Min. Sci. And Geomecha. Abstr, vol.15-16, pp.47-51, 99-103, 135-156