• 한국식품영양학회지
• /
• 제33권6호
• /
• pp.666-671
• /
• 2020

To analyze the quality characteristics of soybean (Glycine max), the approximate analysis, physical properties, mineral and free sugar content of domestic soybean cultivars were analyzed. The moisture content was about 9.15~11.84%. The fat content of Cheonga, Taekwang, and Jinpung cultivars were 17.93~18.37%, which was significantly higher than that of others. Protein content of Cheonga and Seonyu were 36.15~36.70%, significantly higher than that of others. As for the weight and shape of soybeans, the Daewon was the largest allele, and the seed cover ratio was the highest in the Seonyu. In terms of water absorption rate, the Seonyu showed the highest absorption rate at 246.19%, and the Daewon showed the lowest absorption rate. Soaked soybeans had a hardness of 2.80~4.73 kg/㎠, which did not show low hardness in the sample with high moisture absorption. The grinded soybeans showed higher lightness and yellowness values than the raw soybeans, and the redness was decreased. Soybean minerals contained high K, P, Mg, and Ca content. Overall, The Taekwang contained more minerals than others. Stachyose, sucrose, glucose and fructose were detected as free sugars in soybeans. The total free sugar content of Taekwang was the lowest at 3.47%, and the Cheonga (6.80%) was the highest.

• Advances in nano research
• /
• 제10권3호
• /
• pp.221-234
• /
• 2021

During the previous few years, phenomenon of bioconvection along with the use of nanoparticles showed large number of applications in technological and industrial field. This paper analyzed the bioconvection phenomenon in magnetohydrodynamic boundary layer flow of a Powell-Eyring nanoliquid past a stretchable cylinder with Cattaneo-Christov heat flux. In addition, the impacts of chemical reaction and heat generation/absorption parameter are considered. By the use of appropriate transformation, the governing PDEs (nonlinear) have been transformed and formulated into nonlinear ODEs. The resulting nonlinear ODEs subjected to relevant boundary conditions are solved analytically through homotopy analysis method which is programmed in Mathematica software. Graphical and numerical results versus physical quantities like velocity, temperature, concentration and motile microorganism are investigated under the impact of physical parameters. It is noted that velocity profile enhances as the curvature parameter A and Eyring-Powell fluid parameter M increases but a decline manner for large values of buoyancy ratio parameter Nr and bio-convection Rayleigh number Rb. In the presence of Prandtl number Pr, Eyring-Powell fluid parameter M and heat absorption parameter ��, temperature profile decreases. Nano particle concentration profile increases for increasing values of magnetic parameter Ha and thermophoresis parameter Nt. The motile density profile has revealed a decrement pattern for higher values of bio-convection Lewis number Lb and bio-convection peclet number Pe. This study may find uses in bio-nano coolant systems, advance nanomechanical bio-convection energy conversion equipment's, etc.

• 대한물리치료과학회지
• /
• 제3권2호
• /
• pp.1047-1054
• /
• 1996

We discuss the simple concepts of laser physics, absorption of laser radiation by tissue and current application in medical and physical therapy field. The continuing development in the field of laser technology has encouraged collaboration between clinician and physicist. This can be reached through more. exactly controlled and regulated laser systems for human. In medicine, surgery and physical therapy a laser should be used when it can be shown clearly established techniques. The purpose of this article is to provide the connection between pure laser physics and the other clinical application.

• 산업기술연구
• /
• 제35권
• /
• pp.35-39
• /
• 2015

One of the purposes of the study was to investigate and compare the physical properties(depth of light cure, degree of conversion, water absorption) of 4 kinds of composit resins prepared in this lab; Bis-GMA based, Bis-EMA based, Bis-GMA/UDMA based, and Bis-EMA/UDMA based composit. Another aim was to compare the physical properties of the composit resins with those of the commercialized products(Charmfil flow(Denkist), Quadrant flow(CAVEX)) in market. All of the composit resins and the commercialized products showed almost same values of the physical properties. It was found that all of the composit resins prepared in this lab satisfied the physical properties specified in ISO 4049.

• 한국응용과학기술학회지
• /
• 제38권3호
• /
• pp.801-812
• /
• 2021

바이오틴을 피부에 전달하기 위해 고압균질기를 사용하여 바이오틴과 세라마이드를 모두 함유하는 에토좀에 대하여 연구하였다. 바이오틴이 주된 성분으로 사용되었으며, 세라마이드 NP는 인지질 이중층의 지지체로 활용되었다. 바이오틴은 수용성 내부에 포획되었고, 세라마이드 NP는 에토좀의 이중층에 흡착되었다. 세라마이드 NP를 함유한 에토좀의 물성을 살펴보면 소포체의 크기는 80~130 nm, 다분산지수는 0.09~0.16, 제타 전위는 -40~-49 mV로 측정되었다. 세라마이드 NP가 없는 소포체의 크기는 124.80±1.46 nm, 다분산지수와 제타전위는 각각 0.088±0.018과 -45.48±1.27 mV이었다. 따라서 세라마이드 NP가 함유된 에토좀은 세라마이드 NP가 없는 에토좀에 비해 소포체의 물리적 특성이 개선됨을 알 수 있었다. 세라마이드 NP를 함유한 에토좀의 피부흡수율은 12시간 후 6.13~14.98%이었으며, 반면에 세라마이드 NP가 없는 에토좀의 피부흡수율은 7.08%이었다. 결론적으로 세라마이드 NP를 함유한 에토좀은 피부흡수 효율을 향상시킬뿐만 아니라 소포체의 안정성에도 긍정적인 영향을 미쳤다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.71-72
• /
• 2003

The aim of our study is to prepare nanocomposites consisting polymer/inorganic nanoparticles and investigate their physical properties as a functional material. In this study, a nanocomposite of copper sulfide (CuS) nanoparticles introduced into a poly(acrylic acid) matrix was prepared and the optical absorption property was measured. The composite exhibited strong absorption of both ultraviolet and near-infrared rays, indicating that the composite is applicable to a solar radiation shielding filter. The wavelength of the near infrared absorption was controlled from ca.1000 nm to 1700 nm by heat and acidic solution treatments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1222-1227
• /
• 2002

Noise barrier is used to reduce traffic noise. The effect of a noise barrier depends not only on the materials, but also on the physical properties such as density, height and degree of absorption, etc. Typical absorptive noise barrier is used sound absorbing material, such as glass wool and mineral wool. The goal of this study is to develope excellent absorptive noise barrier using a polyester. Laboratory measurements were peformed with various thicknesses, density and layer of absorber in a reverberation room.

• 한국연초학회지
• /
• 제15권1호
• /
• pp.90-97
• /
• 1993

1. Average moisture content of tobacco in BIB silo was about 19: 1% until 4hours conditioned time, and then moisture variation of tobacco after 2hr conditioned was very small. 2. Application of mathematical model for ordering system. 1) The constant K in the exponential equation varies inversely with both relative humidity and equilibrium moisture. 2) Time needed to order blending tobacco leaves with standard moisture from bulking and blending silo was 4 hours. 3) Reconstituted tobacco sheet had higher moisture absorption ratio than Oriental and Burley tobacco. 4) For minimize of conditioning time in BIB silo, the values of K and Mo given in this study can be used in equation(1) to calculate moisture absorption ratio and optimum conditioning time. 3. Average moisture content and water activity of conditioned tobacco for 4 hours in BIB silo was about 20% and 0.65. In this condition. microbial life will inhibite 4. Physical properties of conditioned tobacco in bulking and blending silo for 4hours was virtually no change.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.45-48
• /
• 2003

Most concrete is recently made of an aggregate which is properly absorbed, and carried in it in order to do capability at every fields. We have been close to demand new capability of high flowing and enduring for specific concretes. That is difficult to cope with claiming the efficiency on deterioration from lack of a high quality aggregate. Therefore, For solving the problems we apply to a packing method for using dried materials. That is to say it is a kind of making into an instant. In this study, There is a purpose to present fundamental data, comparing and analyzing a phenomenon about aggregate's absorption following the rate of adding water, for using existing materials.

• 천문학논총
• /
• 제29권3호
• /
• pp.35-44
• /
• 2014

In ground-based astronomical spectroscopic observations, there are many telluric absorption lines that are laid on the spectra of celestial objects. To study the physical properties of the celestial objects with these contaminated spectra, the telluric lines should be removed. A conventional method for removing the telluric lines is using the standard stellar spectrum as telluric line. In this paper, we introduce a technique to calculate synthetic telluric spectra and use them to remove telluric lines from a spectrum of a celestial object. We used Line-by-Line Radiative Transfer Model (LBLRTM) for calculating a synthetic spectrum and selected Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) model as atmospheric model. We apply our method to some spectra obtained by Bohyunsan Observatory Echelle Spectrograph (BOES) to show that the telluric lines are well removed from the observed spectra by our model within an accuracy of 2% which is close to the 1-sigma rms of the original spectra.