• Preventive Nutrition and Food Science
• /
• v.5 no.3
• /
• pp.136-141
• /
• 2000

The properties of pulsed photostimulated luminescence (PPSL) were measured to use as basis data for the detection of irradiated foodstuffs (34 different foods). Samples were packed in polyethylene bags and irradiated at 1, 5, and 10 kGy with a dose rate of 10 kGy/h. The samples irradiated were introduced in the sample chamber without other preparation and measured PPSL photon counts for 60 and 120 s. The PPSL photo counts of the irradiated samples were higher than the unirradiated, increased with increasing irradiation dose, and showed a good relationship between irradiation doses and photon counts in a multinomial expression. These results suggest that the detection of irradiated foodstuffs was possible by PPSL. Therefore, PPSL can be proposed as the method for the detection of irradiated foodstuffs.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.353-355
• /
• 1997

A single molecule detection system, which consists of confocal fluorescence microscope and single photon counter, has been used to observe the dye concentration dependence of photon counting rate. With increasing concentration, a saturation effect of counting is observed and demonstrated on the basis of the dead time of photon detector. The equations presented here show the relations between the counting rate and some parameters such as probe volume, quantum efficiency of detector, and fluorescence photon number entered onto detector. The signal-to-noise ratio is also discussed briefly.

• Preventive Nutrition and Food Science
• /
• v.9 no.2
• /
• pp.133-137
• /
• 2004

This study was carried out to establish a method for the detection of irradiated glutinous rice by measuring pulsed photostimulated luminescence (PPSL) and viscometric properties. Viscosity was determined using a Brookfield DV-III rotation viscometer at 3$0^{\circ}C$ and measured at 30, 60, 90, 120, 150, 180, and 210 rpm. All irradiated samples indicated a decrease in viscosity with increasing stirring speeds (rpm) and irradiation doses. Treatments with 2∼5 kGy significantly decreased the viscosity. The photon counts of the irradiated glutinous rice were measured by PPSL and the photon counts of the non-irradiated and irradiated glutinous rice measured immediately after irradiation exhibited an increase with increasing irradiation dose. The photon counts of irradiated glutinous rice almost disappeared with the lapse of time when stored under normal room conditions, but was still possible to detect after 12 months of darkroom storage. Consequently, these results indicate that the detection of irradiated glutinous rice is possible by both viscometric and PPSL methods.

• Preventive Nutrition and Food Science
• /
• v.10 no.2
• /
• pp.140-144
• /
• 2005

This study was carried out to establish methods for irradiation detection of irradiation in Korean wheat flour by pulsed photostimulated luminescence (PPSL) and viscometric methods. The photon counts of the irradiated Korean wheat flour measured by PPSL immediately after irradiation increased with increasing irradiation dose. The photon counts in the irradiated Korean wheat flour almost disappeared with lapse of time after storage in normal room conditions, but irradiation detection was still possible after 6 months in darkroom conditions. All irradiated samples indicated a decrease in viscosity with increasing stirring speeds (rpm) and irradiation doses. Irradiation at 1 kGy significantly decreased the viscosity. Consequently, these results suggest that the detection of irradiated Korean wheat powder is possible by both viscometric and PPSL methods.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.388-394
• /
• 2010

In this paper the object recognition performance of a photon counting integral imaging system is quantitatively compared with that of a conventional gray scale imaging system. For 3D imaging of objects with a small number of photons, the elemental image set of a 3D scene is obtained using the integral imaging set up. We assume that the elemental image detection follows a Poisson distribution. Computational geometrical ray back propagation algorithm and parametric maximum likelihood estimator are applied to the photon counting elemental image set in order to reconstruct the original 3D scene. To evaluate the photon counting object recognition performance, the normalized correlation peaks between the reconstructed 3D scenes are calculated for the varied and fixed total number of photons in the reconstructed sectional image changing the total number of image channels in the integral imaging system. It is quantitatively illustrated that the recognition performance of the photon counting integral imaging system can be similar to that of a conventional gray scale imaging system as the number of image viewing channels in the photon counting integral imaging (PCII) system is increased up to the threshold point. Also, we present experiments to find the threshold point on the total number of image channels in the PCII system which can guarantee a comparable recognition performance with a gray scale imaging system. To the best of our knowledge, this is the first report on comparisons of object recognition performance with 3D photon counting & gray scale images.

• Current Optics and Photonics
• /
• v.5 no.4
• /
• pp.375-383
• /
• 2021

We present a simulation method to design antireflection coating (ARCs) for fiber-coupled superconducting nanowire single-photon detectors. Using a finite-element method, the absorptance of the nanowire is calculated for a defined unit-cell structure consisting of a fiber, ARC layer, nanowire absorber, distributed Bragg reflector (DBR) mirror, and air gap. We develop a method to evaluate the uncertainty in absorptance due to the uncontrollable parameter of air-gap distance. The validity of the simulation method is tested by comparison to an experimental realization for a case of single-layer ARC, which results in good agreement. We show finally a double-layer ARC design optimized for a system detection efficiency of higher than 95%, with a reduced uncertainty due to the air-gap distance.

• Current Optics and Photonics
• /
• v.8 no.1
• /
• pp.105-111
• /
• 2024

We investigate the effect of photon loss on pair production in a hybrid atom-light system. The loss of light field not only affects the generation of photons, but also prevents the generation of atomic collective excitation, although the atoms are not influenced directly. We propose an unbalanced homodyne detection of the number of atomic collective excitation that overcomes the challenge caused by counting uncertainty in practical measurement. In discussion, we show that the intermode correlations and the number correlation is closely related to the initial input state, while the quadrature correlations are independent of the initial state and always exhibit opposite intermode correlations even in the presence of loss.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.599-605
• /
• 2010

A two-photon fluorescent probe (ACaCL) that can detect near-membrane $Ca^{2+}$ is reported. This probe can be excited by 780 nm fs pulses, shows high photostability and negligible toxicity, and can visualize near-membrane $Ca^{2+}$ in live cells and deep inside live tissues by two-photon microscopy.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.4
• /
• pp.22-25
• /
• 2017

Superconducting nanowire single photon detectors (SNSPD) have become the most competent photon-counting devices in wide range of wavelengths. Especially in the communication wavelength (infrared), SNSPD has shown unbeatable superior performance compared to the state-of-art semiconductor single photon detectors. The technology has matured enough for the last decade so that several commercial systems are now almost ready for routine use in general optics experiments. Here we summarize briefly the recent progress in this research field, and hope to motivate further research on the improvement of the device and the system. We cover the basic key concepts, device and system performances, remaining issues and possible further research directions of SNSPD.

• Journal of the Optical Society of Korea
• /
• v.20 no.5
• /
• pp.579-585
• /
• 2016

Integral imaging combined with photon-counting detection has been researched for three-dimensional information sensing under low-light-level conditions. This paper addresses the extraction of distance information with photon-counting integral imaging. The longitudinal distance to the object is obtained utilizing photon-counting elemental images. The pixel disparity is estimated by maximizing the nonlinear correlation of photocounts. The first- and second-order statistical properties of the nonlinear correlation are theoretically derived. In the experiments, these properties are verified by varying the mean number of photocounts in the scene. The average distance is compared to that from the intensity information, showing the robustness of the proposed system even at low photocounts.