• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.740-742
• /
• 2005

In the past, a mobile phone had only a function of communication. Recently, new functions such as an mp3 player and a camera are added in a mobile phone. For the application of a camera module to a mobile phone, the size of the camera module needs to become smaller than a general Digital Camera. Furthermore, it is also required that the performance of the camera module in a mobile phone be the same as that of a Digital Camera. In order to fulfill these requirements, the camera module should have functions such as Auto Focus, Zoom, the shutter and the aperture. Therefore, we introduce a simple and effective actuator and propose the shutter composed of solenoid.

• 제어로봇시스템학회논문지
• /
• 제13권12호
• /
• pp.1160-1166
• /
• 2007

This paper presents the design and implementation of an embedded image stabilization control system for a mobile phone with a built-in camera. Image stabilization is a family of techniques for reducing image blur resulting from minute camera shake due to hand-held shooting, thereby allowing the use of shutter speeds slower than values normally required to obtain sharp images. A mechanical image stabilizer mechanism developed for a camera mobile phone is introduced and a digital control system as a part of the image stabilization system is designed and implemented on an 8-bit microcontroller with integer arithmetic in C. This paper focuses primarily on issues that need to be taken into consideration for fixed-point implementation of the digital controller. Several experimental results are presented to demonstrate the performance of the implemented image stabilization control system.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1385-1391
• /
• 2010

본 논문에서는 폰 카메라 응용을 위해 H 형 비틀림 스프링으로 지지된 한 쌍의 사다리꼴 셔터 블레이드를 이용하는 초소형, 저전력, 고속 전자기력 Flapping 셔터를 제안한다. 기존의 정전기력 Rolling 셔터와 Flapping 셔터는 폰 카메라 응용을 위해 큰 입력 전압이 필요하며, 기존의 전자기력 Rotating 셔터는 큰 부피로 인해 폰 카메라에 사용하기 어렵다. 본 논문에서 제안하는 전자기력 Flapping 셔터는 폰 카메라에 사용 가능한 작은 크기로 회전 구동을 위해 저강성 H 형 비틀림 스프링과 저관성 사다리꼴 블레이드로 설계하여 제작된다. 실험에서 전자기력 Flapping 셔터는 입력전류 60 mA 에서 자기장 0.15 T 와 0.30 T 에 대하여 각각 최대 오버슈트 회전각 $80.2{\pm}3.5^{\circ}$와 $90.0{\pm}1.0^{\circ}$와, 정상 상태 회전각 $48.8{\pm}1.4^{\circ}$와 $64.4{\pm}1.0^{\circ}$ 성능을 보인다. 응답 시간 성능에서는 셔터 개방의 경우, 1.0 ms/20.0 ms 의 상승/정착 시간을 보이며, 셔터 폐쇄의 경우는 1.7 ms/10.3 ms 의 하강/정착 시간을 보인다. 본 논문에서는 폰 카메라용 셔터 응용을 위해 제안하는 전자기력 Flapping 셔터의 초소형(${\sim}8{\times}8{\times}2\;mm^3$), 저전력(${\leq}60\;mA$), 고속(~1/370 s) 성능을 실험적으로 검증하였다.

• ETRI Journal
• /
• 제34권1호
• /
• pp.138-141
• /
• 2012

This letter proposes a real-time digital image stabilization system for cell phone cameras without the need for frame memory. The system post-processes an image captured with a safe shutter speed using an adaptive denoising filter and a global color correction algorithm. This system can transfer the normal brightness of an image previewed under long exposure to the captured image making it bright and crisp with low noise. It is even possible to take photos in low-light conditions. By not needing frame memory, the approach is feasible for integration into the size-constrained image sensors of cell phone cameras.

• International journal of advanced smart convergence
• /
• 제4권2호
• /
• pp.94-102
• /
• 2015

Optical camera communication (OCC) is an extension of Visible Light Communication. Different from traditional visible light communication, optical camera communications is an almost no additional cost technology by taking the advantage of build-in camera in devices. It was became a candidate for communication protocol for IoT. Camera module can be easy attached to IoT device, because it is small and flexible. Furthermore almost smartphone equip one or two camera for both back and font side with high quality and resolution. It can be utilized for receiving the data from LED or positioning. Actually, OCC combines illumination and communication. It can supply communication for special areas or environment where do not allow Radio frequency such as hospital, airplane etc. There are many concept and experiment be proposed. In this paper we proposed utilizing Android smart-phone camera for receiver and introduce new approach in modulation scheme for LED at transmitter. It also show how Manchester coding can be used encode bits while at the same time being successfully decoded by Android smart-phone camera. We introduce new data frame format for easy decoded and can be achieve high bit rate. This format can be easy to adapt to performance limit of Android operator or embedded system.