• Proceedings of the Optical Society of Korea Conference
• /
• 2005.07a
• /
• pp.246-247
• /
• 2005

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.906-913
• /
• 2009

In this paper, the design concept and implementation method of the X-band 4-bit($22.5^{\circ}$, $45^{\circ}$, $90^{\circ}$, $180^{\circ}$ BIT) diode phase shifter in the parallel plate waveguide are introduced. The simulated results of $11.25^{\circ}$, $22.5^{\circ}$ and $45^{\circ}$ dielectric phase shift layers using CST's MWS and Agilent's ADS are presented, and the measured results are compared with the simulated ones. The simulated phase shift errors at the center frequency are $0.6^{\circ}$, $0.7^{\circ}$, and $3.5^{\circ}$, respectively and the measured phase shift errors at the center frequency are $0.6^{\circ}$, $2^{\circ}$, and $5.5^{\circ}$, respectively. Also, the MWS simulated results of $22.5^{\circ}$ BIT and $45^{\circ}$ BIT phase shifter are presented and compared with the ADS simulated ones to verify the validity of the presented design concept and implementation method.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.417-424
• /
• 2016

In this paper, an accurate characterization of a fabricated X-band transmit/receive module is described with the process of generating control data to correct amplitude and phase deviations in an active electronically scanned array antenna unit. In the characterization, quantization errors (from both a digitally controlled attenuator and a phase shifter) are considered using not theoretical values (due to discrete sets of amplitude and phase states) but measured values (of which implementation errors are a part). By using the presented procedure for the characterization, each initial control bit of both the attenuator and the phase shifter is closest to the required value for each array element position. In addition, each compensated control bit for the parasitic cross effect between amplitude and phase control is decided using the same procedure. Reduction of the peak sidelobe level of an array antenna is presented as an example to validate the proposed procedure.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1121-1127
• /
• 2010

This paper describes the equivalent circuit of $45^{\circ}$ layer, one of $11.25^{\circ}$, $22.5^{\circ}$, and $45^{\circ}$ phase shift layers, which are needed for X-band Radant lens 4-bit phase shifter. The equivalent circuit is extracted by comparing the CST's MWS results with the Agilent's ADS results for $45^{\circ}$ phase shift layer. The simulated result is compared with the measured one. Using the extracted equivalent circuit, the phase bit simulation results of 4-bit Radant lens are also presented.

• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.259-267
• /
• 1999

In this paper, a C-band 6-bit phase shifter is designed and fabricated and design techniques for each phase bit are represented. We applied the loaded line type to $5.625^{\circ},\;11.25^{\circ},\;22.5^{\circ}\;and\;45^{\circ}$ phase bits and the hybrid coupled type to $90^{\circ}$ phase bit and the switched line type to $180^{\circ}$ phase bit, respectively on a microstrip copper substrate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.611-616
• /
• 2006

In this paper, we propose a practical implementation method of a soft bit decision expression for an R-QAM (Gray coded Rectangular Quadrature Amplitude Modulation) signal based on the Max-Log-MAP algorithm. The parameters of the soft decision expression for the practical implementation can be obtained with simple arithmetic functions associated with some deterministic parameters such as a received value, distances between symbols, and the order of modulation on a signal space. Also, we analyze the performance of an iterative decoding scheme for the QAM signal with I/Q phase unbalance. The unbalance results from the non-ideal characteristic of components such as a phase shifter between in-phase and quadrature paths for quadrature modulator/demondulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.71-79
• /
• 1990

An analog phase shifter is designed at the operating frequency 10GHz that is coupled with a hybrid ring and the network connecting an inductor series with a varactor to extend a continuous chage in the phase of the reflected output wave to be produced from a variation in the terminated varactor reactance as a variation in the reverse bias voltage. It is manufactured in a microstripline in consideration of an effect of the dispersion characteristics and discontinuities. As a resuls of an experiment, a change in the phase is achieved over 180 degree from $52.34^{\circ}$ degrees to $235.01^{\circ}$degrees, the transmission loss is -3.6~-14.3dB, and the return loss is -16~-8dB(1.37

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.707-714
• /
• 2010

Since an LFSR(linear feedback shift register) as a pattern generator has solely linear dependency in itself, it generates sequences by moving the bit positions for pattern generation. So the correlation between the generated patterns is high and thus reduces the possibility of fault detection. To overcome these problems many researchers studied to have goodness of randomness between the output test patterns. In this paper, we propose the new and effective method to construct phase shifter as PRPG(pseudo random pattern generator).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.862-865
• /
• 2007

Rx and Tx signal use same band in RFID. Then RFID system is not used duplexer and used coupler. RFID system have problem about Rx part to Tx leakage signal because that Rx signal port is Tx signal port's Isolation port. We proposal using phase shifter Tx leakage signal decrease than other RFID system. It is same signal Tx signal port's coupling port and isolation port signal except amplitude and phase. So if make coupling signal and isolation signal is in all same signal. We cancel Tx leakage signal used coupling port. And verification about ADS2006.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.228-231
• /
• 2013

This paper proposes a new method that reduces RCS(rader cross section) of the aluminum plate using a oscillation system composed of a VGA(variable gain amplifier) and a phase shifter. Once the oscillation system receives the external-RF signal through a probe on aluminum plate, it makes an amplified signal with a specific phase to cancel the signal reflected from the aluminum plate. The signal transmitted from the oscillation system has the same amplitude and out of phase with the reflected signal. And it can be controlled by the VGA and the phase shifter in the oscillation system. In order to validate the performance of the proposed oscillation system, FEM simulator was used and we measured how much an amplitude of the signal reflected from the aluminum plate rotated in phi direction is reduced in an anechoic chamber.