• Journal of the Korean institute of surface engineering
• /
• v.47 no.1
• /
• pp.7-12
• /
• 2014

The characteristics of oxidation for the Zry-4 was measured in the $800^{\circ}C$ and high steam pressure (50 bar, 75 bar, 100 bar) conditions, using an apparatus for high pressure steam oxidation. The effect of accelerated oxidation by high-pressure steam was increased more than 60% in hydrogen-charged cladding than normal cladding. This difference between hydrogen charged claddings and normal claddings tends to be larger as the higher pressure. The accelerated oxidation effect of hydrogen charging cladding is regarded as the hydrogen on the metal layer affects the formation of the protective oxide layer. The creation of the sound monoclinic phase in Zry-4 oxidation influences reinforcement of corrosion-resistance of the oxide layer. The oxidation is estimated to be accelerated due to the creation of equiaxial type oxide film with lower corrosion resistance than that of columnar type oxide film. When tetragonal oxide film transformed into the monoclinic oxide film, surface energy of the new monoclinic phase reduced by hydrogen in the metal layer.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1657-1662
• /
• 2017

Rotor bar faults in induction machines, which are a part of main distribution of power system, can even stop the entire system by causing contact between a stator and a rotor. There are two methods of diagnosing rotor bar faults in induction motors, online and offline tests, and existing diagnosis methods have many limitations which can lead to misdiagnosis. This paper proposes a potable rotor bar faults diagnosis system based on single phase rotation test, one of offline test methods, which detects rotor bar faults through impedance interpretation by exciting AC current in a stator winding. The test was conducted on a motor of 0.4kW in the laboratory and a motor of 1500kW in industry field.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.424-429
• /
• 1998

Cloud-point data at $230^{\circ}C$ and 1,800 bar are presented for two poly(ethylene-co-vinyl alcohol)(PEVA) copolymers[9.9mol% and 17.8mol% vinyl alcohol(VA)] in ethylene, propane, propylene, n-butane, 1-butene, dimethyl ether(DME), and chlorodifluromethane(CDFM). The static type experimental apparatus with a view cell has been used for the experiment at the high pressure and temperature. The pressure-temperature (P-T) loops of PEVA(9.9mol% VA) copolymer-DME mixtures are presented at copolymer concentrations of 1.4wt% to 20.0wt%. Also, we presented the phase behavior of PEVA(17.8mol% VA) copolymer-DME system at copolymer concentration of 1.9wt% to 6.8wt%. The cloud-point curves for the PEVA copolymers in dimethyl ether showed single phase above 480 bar as a result of the hydrogen bonding between the vinyl alcohol unit and dimethyl ether. The pressure-concentration(P-x) isotherm loops of PEVA(9.9mol% and 17.8mol% VA)-DME system are obtained. The cloud-point curves for PEVA(9.9mol% and 17.8 mol% VA) copolymers andthe ethylene, propane, propylene, n-butane, 1-butene, and CDFM all show negative slopes of phase behavior and are located at pressures below 1,800 bar. For PEVA copolymer-DME system(9.9mol% VA), cloud-point curves show positive slopes that decrease in pressures with decrease in temperature in the temperature range of $80^{\circ}C$ to $160^{\circ}C$.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.317-325
• /
• 2011

This study aims to develop the stance-control typed 4-bar linkage orthotic knee joint that replace the locked orthotic knee joint for the disabled with poliomyelitis and muscle weakness of lower limb. Unlike the existing stance-control orthotic knee joint, there are no needs of electric power, connecting circuit, bulky compomnets, etc, because this 4-bar linkage orthotic knee joint is controled by geometric locking. To evaluate the 4-bar linkage orthotic knee joint, a subject participated in this study who has been diagnosed with lower limb poliomyelitis and have used locked type orthotic knee joint. In the results of analysis of subject's gait using 3-dimentional motion analysis system, this 4-bar linkage orthotic knee joint provide the stability during stance phase and knee flexion during swing phase.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.6
• /
• pp.678-681
• /
• 1991

The Wittig-oxy-Cope rearrangements of deprotonated diallyl ether, I, $CH_2={\bar{C}}H-CH-O-CH_2-CH=CH_2$, have been investigated theoretically by the AM1 method. A two step mechanism forming a Wittig product ion, II, $(CH_2=CH)$ $(CH_2=CH-CH_2)$ $CHO^-$, through a radical-pair intermediate was found to provide the most favored reaction pathway in the Wittig rearrangement. The subsequent oxy-Cope rearrangement from species II also involves a two step mechanism through a biradicaloid intermediate. The intramolecular proton transfer in I (to form $CH_2=CH-CH_2-O-{\bar{C}}H-CH=CH_2$) is a higher activation energy barrier process compared to the Wittig and oxy-Cope rearrangements and is considered to be insignificant. These results are in good agreement with the condensed-phase as well as gas-phase experimental results.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.515-520
• /
• 2020

The design and actual implementation of the four-bar parallel link was studied in the paper. The parallel four-section link is widely used as a basic kinematic mechanism for transmitting the rotation of one axis to the rotational motion of the other axis. However, the parallel 4 link has a problem that phase reversal occurs at the turning point during the movement. In order to prevent the link reversal, it is known that a double parallelogram-type link is formed by attaching an additional phase reversal suppression link with an offset. However, as a result of the actual fabrication experiment, the movement is not smooth at the transition point. In order to solve this problem, in this study, a link for smooth movement is added in addition to a link that provides an offset to prevent phase reversal, so that the phase reversal does not occur at a specific point when the driven shaft rotates along the drive shaft. The test result confirms the validity of our suggestion.

• Physical Therapy Korea
• /
• v.20 no.1
• /
• pp.18-27
• /
• 2013

The purpose of this study was to compare the ring lock type knee-ankle-foot orthosis (KAFO) with newly developed 4-bar linkage KAFO on the gait characteristics of persons with poliomyelitis clinically. This 4-bar linkage is the stance control type KAFO which provide the stability during stance phase and knee flexion during swing phase. Two subjects participated in this study voluntarily. We provided the customized 4-bar linkage KAFO then asked the subjects to walk in level surface and stairs under the two different KAFO conditions. The characteristics of gait in the persons with poliomyelitis were evaluated using a 3D motion analysis system and force plate. Additionally 6 minute walk test for physiological cost index were conducted using pulse oximeter to measure the energy consumption. In the results of this study, the differences of 4-bar linkage KAFO compared with ring lock type KAFO are as follows: (1) Walking speed, stride length, and step length on level increased in subjects, (2) The gait symmetry was improved by generated knee flexion and decreased pelvic external rotation on level and stairs walking, (3) Decreased vertical excursion of center of mass and pelvic elevation during swing phase was decreased on level, (4) Knee extension moment, hip flexion moment, hip and knee internal rotation moment of non-braced limb were decreased on level walking, (5) Walking speed in 6-minute walk test was increased and physiological cost index was decreased. These findings indicate that 4-bar linkage KAFO compared with ring lock type KAFO is effective in enhancing pattern, endurance, and energy consumption in level surface and stairs walking.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.1
• /
• pp.22-26
• /
• 2003

Overlap Errors and side-lobes have been simultaneously solved by the rule-based correction using the rules extracted from test patterns. Lithography process parameters affecting attPSM lithography process have been determined by the fitting method to the real process data. The correction using scattering bars has been compared to the Cr shield method. The optimal insertion rule of the scattering bal's has made it possible to suppress the side-lobes and to enhance DOF at the same time. Therefore, in this paper, the solution to both side-lobe and overlap Error has been proposed using rule-based confection. Compared to the existing Cr shield method, the proposed rule-based correction with scattering bars can reduce the process complexity and time for mask production.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.57.1-57.1
• /
• 2011

Using high-resolution numerical simulations, we investigate the formation of gaseous substructures and mass inflow rates in barred spiral galaxies in the presence of both bar and spiral potentials. The gaseous medium is assumed to be infinitesimally-thin, isothermal, unmagnetized, and non-self-gravitating. To consider various galactic situations, we vary the pattern speed and strength of spiral arms as well as the black hole mass. We find that spiral arms with pattern speed smaller than that of the bar remove angular momentum from the gas outside corotation which transports to the bar region, making the dust lanes strong and live long. When the arm pattern speed is identical to that of the bar, on the other hand, the gas outside corotation gains angular momentum and thus moves outward, without affecting the bar region. Overall gaseous morphologies in simulations match well with observed IR images of barred spiral galaxies such as NGC 1097, when the arms and bar are in phase at the corotation radius. The presence of spiral arms increases the mass inflow rate as well, making it larger than $0.01M_{\odot}/yr$ when MBH is $4{\times}10^7M_{\odot}$, possibly explaining AGN activities in Seyfert galaxies.

• Journal of the Korean Statistical Society
• /
• v.35 no.4
• /
• pp.377-395
• /
• 2006

In this paper we have suggested a family of chain estimators of the population mean $\bar{Y}$ of a study variate y using two auxiliary variates in two phase (double) sampling assuming that the coefficient of variation of the second auxiliary variable is known. It is well known that chain estimators are traditionally formulated when the population mean $\bar{X}_1$ of one of the two auxiliary variables, say $x_1$, is not known but the population mean $\bar{X}_2$ of the other auxiliary variate $x_2$ is available and $x_1$ has higher degree of positive correlation with the study variate y than $x_2$ has with y, $x_2$ being closely related to $x_1$. Here the classes are constructed when the population mean $\bar{X}_1\;of\;X_1$ is not known and the coefficient of variation $C_{x2}\;of\;X_2$ is known instead of population mean $\bar{X}_2$. Asymptotic expressions for the bias and mean square error (MSE) of the suggested family have been obtained. An asymptotic optimum estimator (AOE) is also identified with its MSE formula. The optimum sample sizes of the preliminary and final samples have been derived under a linear cost function. An empirical study has been carried out to show the superiority of the constructed estimator over others.