• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2004.06a
• /
• pp.95-98
• /
• 2004

본 논문에서는 결합변환상관기(joint transform correlator)와 위상 암호화된 영상들을 이용하여 영상의 인식 및 복호화가 가능한 광 암호화 시스템을 제안하였다. 그레이 값을 가지는 원 영상은 동일한 그레이 값을 가지는 이진 영상으로 나누어 표현할 있다. 이러한 이진 영상들을 각각의 다른 이진 무작위 영상과 위상 부호화한 XOR 연산을 이용해 암호화할 수 있으며. 암호화한 영상들을 결합한 후 위상 부호화 과정을 거쳐 최종 암호화 영상를 구한다. 키 영상은 암호화에 사용된 각각의 이진 무작위 영상들을 최종 암호와 영상를 얻을때의 과정처럼 결합하여 역시 하나의 영상으로 구할 수 있다. 최종 암호화 영상과 키 영상을 제안한 결합변환상관기의 입력으로 사용하여 구한 상관치는 높고 폭이 좁은 특성을 가지고 있으므로 분별성능이 좋은 인식 시스템을 구현할 수 있을 뿐만 아니라 복호화 영상도 구할 수 있다. 컴퓨터 모의 실험으로 제안한 방법을 확인해보았다.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.125-128
• /
• 1987

This paper deals with the topological observability analysis and the derivation of a reliability evaluation formula of a measurement system for state estimation. An analogy of the DC power flow method to the DC circuit analysis is introduced, and all the relationship between power flows and phase angles are replaced by the corresponding current-voltage relation. As a result, a set of topological measurement equation expressed in the form of the incidence matrix is derived for the topological analysis, and the observability test is carried out by examining the rank of the measurement matrix. The reliability evaluation formula was derived experimentally by testing the observability of sample systems of IEEE-14, IEEE-3.0, IEEE-57.

• Annual Conference on Human and Language Technology
• /
• 1992.10a
• /
• pp.525-532
• /
• 1992

본 연구는 한글 글자를 지각하는데 있어서 인식의 초기 단계에 사람들이 글자의 유형을 처리하는지 알아보기 위하여 시행되었다. 글자인식의 초기 단계에서 유형 분류를 한다는 것은 이미 인공시각 연구자들에 의해 시뮬레이션을 통해 검증된 바 있으나, 그것이 심리학적으로 실재성을 가지는지에 대한 검토는 없었으므로 본 연구를 실시하게 된 것이다. 먼저 예비실험을 통해 본 실험에서 쓸 자극제시시간을 구했으며, 실험은 한글 글자 중 낱자 수가 두 개인 유형 1, 2 의 글자를 자극으로 쓰는 경우와, 낱자 수가 세개인 유형 3, 4, 5 의 글자를 자극으로 쓰는 경우를 나누어서 실시하였다. 실험 1 과 실험 2 의 결과는 모두 가설을 강력히 지지하는 것으로 나왔다. 즉 자극제시시간을 역치하로 했을 경우 글자의 정답율과 유형의 정답율을 비교해 보았을 때 유형의 정답율이 유의하게 높았으며, 이는 아직 글자의 의미처리가 일어나기 전인 인식의 초기 단계에서 이미 글자의 유형에 대한 처리가 일어났음을 시사해 주는 것이다.

• Journal of the Optical Society of Korea
• /
• v.15 no.2
• /
• pp.128-131
• /
• 2011

After the successful extension of the rotating planar waveguide model to Wave Optics, where a clear identification between the angular velocity of one hypothetical waveguide and the phase differences between two points on the path of one bounded mode was found, an application of the model to explain the interference theory is presented. We demonstrate that, for two bounded modes to create an interference pattern, a constrain to the relative parameters among both is imposed by the fiber optics. This result, not reported in the literature up to date, provides a new horizon to understand the interaction light-light when propagated within optical fibers.

• Korean Parent-Child Health Journal
• /
• v.8 no.1
• /
• pp.17-22
• /
• 2005

Adolescence can be a time of turmoil and of stress. Rebellion against authority and against convention is to be tolerated for the sake of growth. The adolescence of children is a difficult time for parents. It is difficult to tolerate his/her manners, language, shifting moods, and constant confrontations of an adolescent child. Because of his/her egocentric thought process, he/she will be truly surprised if parents feel hurt by his/her behaviors. The parents need to learn that all these irrational behaviors fit his/her developmental phase. Adolescents have to free themselves from childhood ties with parents, establish new identification with peers, and find their own identity. The parents can be role models, maintain communication channels, and show their love while adolescents go through temporary disorganization and madness necessary for reorganization which will lead to mature human beings.

• The Journal of Korea Robotics Society
• /
• v.6 no.3
• /
• pp.284-291
• /
• 2011

This paper presents the estimation of the frictional coefficient of the wheel-legged robot with hip joint actuation producing maximum tractive force. Slip behavior for wheel-legged robot is analytically explored and physically understood by identification of the non-slip condition and derivation of the torque limits satisfying it. Utilizing results of the analysis of slip behavior, the frictional coefficients of the wheel-legged robot during stance phase are numerically estimated and finally this paper suggests the pseudo-algorithm which can not only estimate the frictional coefficients of the wheel-legged robot, but also produce the candidate of the touch down angle for the next stance.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.05
• /
• pp.7-14
• /
• 1993

Nowadays, microspheres are expected to be applied to biomedical areas and many studies are being performed. For biomedical applications, many kinds of microspheres were synthesized by emulsion polymerization, emulsifier-free emu]sion polymerization, and emulsifier-free emulsion polymerization with ionic surface-active comonomers. Further synthesis techniques about microencapsulation and magnetic microspheres are introduced. Among the practical applications of microspheres, some interesting subjects are introduced. These include solid-phase immunoassays, labeling and identification of lymphocyte populations, extracorporeal and hemoperfusion systems, drug delivery systems, and immunomagnetic cell separation. In addition, basic theories, problems and research trends are also introduced.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.191-192
• /
• 2007

This paper presents a 900MHz fractional-N frequency synthesizer for radio frequency identification (RFID) reader using $0.18{\mu}m$ standard CMOS process. The IC meets the EPC Class-1 Generation-2 and ISO-18000 Type-C standards. To minimize VCO pulling, the 900MHz VCO is generated by a 1.8GHz VCO followed by a frequency divider. The settling time of the synthesizer is less than $20{\mu}m$. The frequency synthesizer achieves the phase noise of -105.6dBc/Hz at 200kHz offset. The frequency synthesizer occupies an area of $1.8{\times}0.99mm^2$, and dissipates 8mA from a low supply voltage of 1.8V.

• IE interfaces
• /
• v.19 no.3
• /
• pp.181-189
• /
• 2006

This study introduces an overall framework for RFID applications in product lifecycle management(PLM). PLM is a new strategic approach to manage product related information efficiently over the whole product lifecycle. Recently, with emerging technologies such as radio frequency identification(RFID), global positioning system(GPS), and wireless communication, PLM provides a new environment that enables us to gather and analyze product lifecycle information, and make decisions on several issues without spatial and temporal constrains. However, a PLM system just provides us with new opportunities to gain the PLM system, first and foremost, it is necessary to look into its overall framework in the viewpoint of hardware, software, and business model. For this purpose, in this study, first, we introduce the technical framework of the new PLM environment with the concept of extended RFID system, called product embedded information device(PEID). Then, for each lifecycle phase such as beginning of life(BOL), middle of life(MOL), and end of life(EOL), we explore several research problems that become highlighted under the new PLM environment.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.49-54
• /
• 2002

This paper describes a systematic way of simultaneously identifying the ambient pore pressure and the rigidity index (=G/s$\_$u/) of soil by applying an optimization technique to the piezocone dissipation test result. An ambient pore pressure and optimal rigidity index were determined by minimizing the differences between theoretical excess pore pressures developed by Randolph ＆ Wroth(1979) and measured excess pore pressures from piezocone using optimization technique. The effectiveness of the proposed back-analysis method was examined against the well-documented performance of piezocone dissipation tests (Tanaka ＆ Sakagami, 1989), from the viewpoints of proper determination of selected target parameters and saving of test duration. It is shown that the proposed back-analysis method can evaluate properly the ambient pore pressure and the rigidity index by using only the early phase of the dissipation test data. Also, it is shown that with the optimized rigidity index and ambient pore pressure the proposed back-analysis method permits the horizontal coefficient of consolidation to be identified rationally.