• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.215-219
• /
• 2006

According to increase of personal incomes, spread of automobiles, a five-day only work week and expansion of cultural life, modern people today are increasingly showing leisure time interests. Under such social circumstances in which people's spare time are gradually increasing, weekend trips accompanied with hotel staying are increasing to a greater extent rather than one-day trips. In Korea where differences between regions and four seasons are remarkable, the resort industry has developed in harmony with seasonal environments and regional characteristics. In particular, an increasing number of modern people living in the wellbeing era tends to visit spa resort hotels for recreation and health. This study intends to compare realities of local and foreign spa resort hotels and investigate space characteristics of local spa resort hotels for promotion of use. In this study, it has been found that the proposed addition of characteristic-oriented spaces to the existing recreation, service and basic facilities beside the fundamental accommodations would be able to remarkably elevate use of the hotels.

• Tribology and Lubricants
• /
• v.22 no.4
• /
• pp.196-202
• /
• 2006

This paper presents a case study on the tribological failure analysis of a clutch system for a manual transmission car. The clutch systems are composed of clutch disk, clutch pressure plate, flywheel rubbing surface, coil and diaphragm springs, release bearing and lever, clutch spline and shaft. The purpose of a clutch system is to transmit and disconnect the driving power of engines by frictional farce from a rubbing surface of a flywheel to a clutch disk and clutch pressure plate with a minimum power loss. In this study, many tribological failure cases based on the wear phenomena and thermal distortions have been presented, which are collected from the car repair shop and maintenance center. The triboiogicai failures are mostly come from the driving conditions, overloading of a car, and especially driving style and personal habit of a car driver.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.2
• /
• pp.12-19
• /
• 2011

Real-world accident cases were investigated to understand injury characteristics of the elderly driver. A total 10 cases of car-to-car frontal crash accidents from passenger car including SUV claimed to domestic car insurance company were reviewed. The injury characteristics of the elderly were analyzed from personal information (gender, age), medical treatment record (medical certificate, curative days), vehicle information (model, air-bag, seatbelt) and damage information. This study showed that elderly driver has higher possibility of thorax injury than non-elderly's. Moreover, Injury type and severity were more severe than non-elderly driver at similar type accident conditions. Also, elderly driver's medical treatment period needs 3 times more than non-elderly driver's.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1263-1271
• /
• 2001

There are two methods in blood pressure measurement ; Invasive methode and Non-invasive method. The Invasive methode can get the 띠cod pressure measurement but, patient feel uncomfortable. So Non-invasive methode used generally. The Oscillometric method is typical Non-Invasive method. This method is commonly used to measure BP in electric sphygmomanometer and has various algorithm. In this paper it is described about a algorithm, it controls, determinates the cuff pressure, and fillers the measured BP data. This system can interface with PC(personal computer) by RS-232 and save the measured data in PC. This system deflates the cuff pressure by Solenoid valve. The main algorithm are oscillometric and maximum amplitude algorithm(MAA). MAA has various measured oscillation, it depends on patient's age, height, weight and arm circumference size. In this paper proposed system can measure Systolic BP, Diastolic BP, and Mean BP using Interpolation, Auto Reinflation algorithm.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.12 no.20
• /
• pp.1-24
• /
• 1989

This paper takes aim at the reliability evaluation by application of Fault Tree Analysis and its computerization. FTA is one of the methods for evaluation of system reliability and safety analysis. The important characteristic of this paper is that computer program is written in the package program(dBaseIII+) by 16Bit/AT personal computer. The program consists of three program segments. (1) The minimal cut sets of the system fault tree are obtained by means of "Fault tree reduction algorithm" (2) The minimal path sets are obtained by inversion of the minimal cut sets determined from fault tree (3) The importance of the basic events which are presented in the minimal cut sets is obtained by means of structural importance analysis. In this paper, a Fault Tree Analysis is applied to a BAG FILTER which is a kind of dust collector.collector.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.1
• /
• pp.129-135
• /
• 2009

PPCP (pharmaceuticals and personal care products) is known as micropollutant that is released from wastewater treatment plant. Research represents that these contaminants have increased in the last 10 years. This study tries to make four different trickling filter systems using plastic fiber media to remove PPCP such as acetaminophen, ibuprofen, caffeine. The results of the experiment that compares the process efficiencies of four different systems (A, B, C and D) using HBC media show that almost all the reactor has around 95% removal efficiency. Slope type HBC reactor has twice higher efficiency rather than submerged type reactor to remove PPCP in water system. In 8 hours, 89% of acetaminophen, ibuprofen, caffeine are removed in slope type reactor while 39% of them in submerged type.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.108.4-108
• /
• 2001

The integrated environment for the fuzzy logic controller with the acceleration converter to improve the dynamic characteristic of a one-axis moving table is proposed in the paper. The two inputs of the fuzzy logic controller are position error and velocity. The two inputs of the acceleration converter used to produce the acceleration input for the one-axis moving table are actual and setting rotational speeds. The proposed controller is implemented on a personal computer by using MATLAB and Visual Basic for a real time control via a motion control board. The position control results when the stair input is applied to control the position of the one-axis moving table, are shown. The experimental results of the proposed position control system are compared to the conventional PID ...

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.794-799
• /
• 2005

In this paper, the inductive power collector using electromagnetic induction for the PRT(Personal Rapid Transit) system is suggested and some ideas for power collector design to improve the power transfer performance are presented. The proposed the inductive power collector is used for the PRT system, which has a large air-gap and demands a large electrical power capability. But, low output power is generated due to a loosely coupled characteristic of the large air-gap. Therefore, double layer construction of secondary winding. which was divided in half to increase both output current and output voltage was suggested. Also, model of power collector and parallel winding structure are presented, in addition, the performance of inductive power collector to alignment condition between the primary power line and the inductive power transformer was verified by computer simulation of 2kW model.

• Journal of the Korean Statistical Society
• /
• v.8 no.1
• /
• pp.3-14
• /
• 1979

When we estimate the population proportion of the individuals in the population for the attribute or the characteristic, we consider the sample survey. We can consider many methods of the sample survey, as mail questionnaire, visits, personal calls, etc. When we have the list of units in the population, we usually make use of the mail questionnaire. It is economical and free from the investigator's effect on the respondent, but it has some objections. The principal objection is that it involves a large nonresponse rate that might cause a singificant bias in the result. The bias arises from the different in the characteristics under investigation between those who respond and those who do not respond.

• Archives of design research
• /
• v.14
• /
• pp.53-60
• /
• 1996

The most remarkable and characteristic problem of design is that of creativity of design. Originality is a part of creativity. In the process of designing, we used to handle design thoughts that shows some patte군 of divergent and productive thoughts. During design thinking, for example 'Idea sketch', We also are under Pattern Recognition and Gestalt principles organization. In this study, it is reorganized that the 'Originality Test of Line Drawing(OTLD)'is a measurement system for personal originality. There is a regression on two tests of OTLD, which has 1 Semester Interval. From the regression data, Test2 = 7.763 + 0.643Test1, F value : 55.219, Prob : 0.0001. We would suggest a measurement system for an ability of originality in design fields, but we couldn't find any reliability and validity for Fine Art fields. In this point, OTLD could be a development tool for design creativity.