• Journal of Environmental Science International
• /
• v.13 no.6
• /
• pp.519-525
• /
• 2004

Air pollution from the Daegu industrial complex (Die) in Korea has been a common nuisance and cause of complaints for nearby residents. The current study measured the indoor and outdoor levels of six VOC (benzene, toluene, ethylbenzene, and three isomeric xylenes) at two residential areas with a different proximity to the ODIC, plus the ambient levels at two industrial areas within the boundary of the DDIC. The QA/QC program included the range of correlation coefficient (0.94-0.99) for calibration curves, within the permissible range. Toluene was the most abundant VOC in the ambient air both in residential and industrial areas. Both indoor and outdoor air concentrations of all target VOC except benzene were higher in residential area near the DIC compared to that further away from the DIC. Moreover, the ambient air concentrations of all target VOC except benzene for two industrial sites (A and B) were significantly higher than the outdoor or indoor air concentrations in the two residential areas. The findings further suggested that VOC ambient levels measured in a residential area near the DIC be used as a potential indicator of odor-causing unidentified air pollutants transported from the DIC. Moreover, it was found that the elevated ambient toluene levels outweighed the indoor sources with respect to the environmental exposure of residents nearby the DIC. However, in the residential area further away from the DIC, the toluene indoor sources outweighed the outdoor sources.

• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.1-10
• /
• 1997

It is well-known that rectangular bulk-Si sensors prepared by etch or epi etch-stop micromachining technology are already in practical use today, but the conventional bulk-Si sensor shows some drawbacks such as large chip size and limited applications as silicon sensor device is to be miniaturized. We consider a circular-shape SOI(Silicon-On-Insulator) micro-cavity technology to facilitate multiple sensors on very small chip, to make device easier to package than conventional sensor like pressure sensor and to provide very high over-pressure capability. This paper demonstrates the cross-functional results for stress analyses(targeting $5{\mu}m$ deflection and 100MPa stress as maximum at various applicable pressure ranges), for finding permissible diaphragm dimension by output sensitivity, and piezoresistive sensor theory from two-type SOI structures where the double SOI structure shows the most feasible deflection and small stress at various ambient pressures. Those results can be compared with the ones of circular-shape bulk-Si based sensor$^{[17]}. The SOI micro-cavity formed the sensors is promising to integrate with calibration, gain stage and controller unit plus high current/high voltage CMOS drivers onto monolithic chip.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.422-423
• /
• 2015

현재 허용전류는 가장 열악한 조건과 여유분을 주어 계산하기 때문에 지중 송전 케이블의 실제 송전용량은 설계보다 상당히 큰 용량을 사용할 수 있다. 송전용량을 증대시키는 방법 중 하나로 DRS(Dynamic Rating System)를 도입하는 방법이 떠오르고 있다. DRS는 이미 상용화 되어있으나 지중관로의 경우 기존에 포설되어 있는 케이블에 DTS를 설치하기가 곤란하여 관로조건에서는 동적 허용전류를 산정하기에 어려움이 있다. 따라서 본 논문에서는 DTS 계측자료를 이용하여 보정계수법을 통한 허용전류 산정 방법론을 제안한다. 또한 지중관로의 맨홀부에서 측정한 케이블의 표면 온도를 이용하여 관로 내 케이블의 분포 표면 온도를 추정하고 보정계수를 통한 허용전류를 산정하는 방법론을 제안한다.

• International Commerce and Information Review
• /
• v.9 no.2
• /
• pp.307-325
• /
• 2007

Examining the standards of review adopted by the dispute settlement body of the WTO in its decision on safeguard measures, the Appellate Body offers no coherent guidance or theory as to the legitimation of the safeguard measures adopted by the domestic authorities. It faults the lack of reasoned and adequate explanation in the national authorities' decision to impose safeguard measures, yet its own explanation of the permissible role for safeguard measure could hardly be less instructive. The Appellate Body has consistently emphasized fidelity to text in its decision but that approach can not work properly when the text is fundamentally deficient from the viewpoints that neither Article XIX nor the safeguard Agreement establish a coherent foundation for safeguard measures due to their vague and abstract provision. Without any coherent theory on guidance as to the legitimation of the safeguard measures, it would be absurd to expect WTO members to produce a reasoned and adequate explanation as to how their safeguard measures are in compliance with the WTO roles. In the absence of a thorough renegotiation for the proper operation of the WTO safeguard system, which seems quite unlikely for the foreseeable future, perhaps the unique method out of the current predicament is for the Appellate Body to lead a movement in establishing a sensible common law of safeguards, drawing on extra-textual guidance including the standards of review about their proper role in the WTO safeguard mechanism.

• The Korea Journal of Herbology
• /
• v.25 no.1
• /
• pp.45-54
• /
• 2010

Objectives : The purpose of this study is to determine the impurity tolerance of Zanthoxylum Peel. Methods : Compare with medicinal Herb Books and the Pharmacopoeia of 6 nations. Results : Current Pharmacopoeia show different Zanthoxylum Peel's Purity, such as 2.0% of seeds and fruit stalk, etc. in North Korea, 2% of seeds in Vietnam, totally 3% in China. On the other hand, Korea and Japan set the total number 26.0% including the specific numbers such as 20.0% of seeds, 5.0% of fruit stalk, 1.0% of the other foreign matter. This Zanthoxylum Peel's Purity, 26.0%, is too high compared to that of other medical matters specified by The Korean Pharmacopoeia Ninth Edition. When The Japanese Pharmacopoeia Sixth Edition firstly set the Zanthoxylum Peel's Purity, the herbal name was Fructus. However, since the part for medical usage in origin is well-ripen pericarp, not seed, the permissible level, 30.0%, is supposed to be simple error range, 3.0%. Conclusions : As a result, I think bills concerning the Zanthoxylum Peel's Purity should be revised to the total number 3.0% or specifically set the level 2.0% of seeds, 1.0% of fruit stalk, twig and so on.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.2
• /
• pp.266-273
• /
• 1999

The maximum work capacity at various shoulder angles was estimated in terms of joint moment through maximum voluntary contraction (MVC) measurement, and the result was compared to workload computed from 3-D static lifting model (3DSSPP) based upon national institute of safety and health (NIOSH) lifting guideline (1991). The electromyography (EMG) of anterior/posterior deltoid and trapezius muscle was also recorded to study the function of individual muscle during asymmetric shoulder lifting. Psychophysical workload was measured to observe the difference from MVC or biomechanical estimation. An apparatus was constructed for the study and twenty five trials including five flexion angles and five add/abduction angles were performed isometrically. Results indicated that MVC at 30 degree of flexion was the strongest whereas MVC at 120 degree was the weakest. In case of add/abduction, MVC decreased to 77 to 89 % during add/abduction compared to the MVC at neutral position. Regarding the normalized EMG value, a substantial increase was observed at 30 and 60 degree abduction. More importantly, the shoulder moment computed from maximum permissible limit (MPL) was greater than the moment at MVC condition during 30 degree adduction. Current result can be used as a reference information for a safe workplace design to prevent the shoulder from an excessive work load in industry.

• Nuclear Engineering and Technology
• /
• v.22 no.2
• /
• pp.83-94
• /
• 1990

The radioactivity in the spent fuel storage pool is calculated to ensure to maintain its concentration below the permissible limit, when the storage capacity of Uljin nuclear power plant unit 1&2 is extended from 9/3 to 32/3 core using consolidated fuels in maximum density rack (MDR). For this evalulation, two models to calculate the spent fuel pool activities on the continuous and intermittent operating its purification system are developed and these results compared, The results of above two cases show that the current water purification system can not guarantee the radioactivity concentration below the design limit, 5$\times$10$^{-4}$ $\mu$Ci/ml, for the extention to 32/3 core. Therefore, it has been concluded that a modification of the current purification system is necessary to extend the spent fuel storage capacity with the above method. The alternative way suggested in this study is to increase the number of cation bed demineralizers.

• Journal of Korean Physical Therapy Science
• /
• v.22 no.1
• /
• pp.19-27
• /
• 2015

Purpose : The purpose of this study is to check the current status of accessability to rehabilitation therapy in local areas and to review how to improve the accessability. In fact, first, it is very hard for patients to find out a local medical center with rehabilitation therapy capability. Moreover they needs to wait long time to get a treatment they need, because of lack of nearby rehabilitation centers. The best way to enhance the accessability to the rehabilitation therapy service is to allow therapists to set up rehabilitation centers in local areas on their own, physically independent from medical doctors. Basically, the current law does not prohibit therapists' own sole practice. However, it needs to be amended by inserting an explicit legal basis on the setting-up process. If it is legally permissible for the therapists to set up rehabilitation centers to perform a rehabilitation treatment with referrals from of medical doctors (though physically independent from the doctors), it would result in the increase of profits for the doctors and at the same time raise therapists' freedom of occupation, a constitutional right. Furthermore, with their own places to practice, therapists will have to compete with other therapists, that would raise the quality of their treatments, which will in turn benefit patients ultimately. A proposed bill of amendments to the Act on Medical Technicians and etc. is pending for review at the National Assembly. I look forward to vigorous discussion on the bill based on this article, and resulting in revision of the law for the benefits of patients.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.4
• /
• pp.31-38
• /
• 2000

Wide operating range and speed control is needed for wind power generating and a Doubly Fed Induction Generator(DFIG) has good adaptivity for that purpose. This paper deals with the speed, power, and power factor control using the Grid connected DFIG in the super-synchronous speed regions, by controlling frequency and voltage fed to the rotor. Power flow of the DFIG and steady-state algebraic equations of the equivalent circuit are analyzed. The wind turbine speed and constant stator power were controlled by the rotor exciting frequency. For a normal operating region, in which the generator ratings were not exceeded, rotor exciting frequency. For a normal operating region, in which the generator ratings were not exceeded, the rotor current was either less than or equal to the rated value. Accordingly, the optimal power factor can be selected relative to the permissible rated current at the rotor coil which controls the magnitude of the injected rotor voltage to the rotor according to a given rotor frequency. Consequently, it is possible to determine the optimal drive of a DFIG for wind power generation application.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8479-8486
• /
• 2015

This study aim is occur in brain CT cause of beam hardening effect and reducing method, We will scan Bone opaque bead phantom on variation of image on the influence factor with equipment called 'Samatom Senation 16' with following listed herein : tube voltage, tube current, slice thickness, gantry angle, base line which affect beam-hardening effect. After that we are going to start Quantitative Analysis resulted in previous scanning and Qualitative Assessment with CT image sheet evaluation. result of quantitative analysis 140kVp $31.56{\pm}2.89HU$ on tube voltage, 150mA $-3.87{\pm}0.12HU$ on tube current, 3mm on slice thickness, and $13.31{\pm}1.03HU$ IOML on gantry angle which was the least beam-hardening effect. Like Qualitative Analysis, we went through Qualitative Assessment and most of valuers got a result of 140kVp on tube voltage, 150mA on tube current, 3mm on slice thickness. As before valuers evaluated gantry angle that scanned image from IOML or OML was the least beam-hardening effect occured. There are meaningful differences when we compare all theses factors statistically(P<0.05). therefore We consider that Minimizing artifact that caused by beam-hardening effect can provide better quality of image to deciphers and patients. if we rise tube voltage in permissible dose limit, set tube current in a limit that does not effect to image quality, use slice thickness too thin enough to harm resolution, use IOML or OML on gantry angle.