• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2011년도 정기 학술발표대회
• /
• pp.91-91
• /
• 2011

The quality of the surface layer in concrete structures plays an important role in the durability of the concrete. The concrete factory products are made as they improve the appearance of the surface and compressive strength in need. A common criterion to judge the quality of concrete products frequently seen in our daily life appears to be "beauty" in terms of consistent shaping. However, as for most concrete curb in such areas where a large amount of anti-freezing agents(NaCl) and ice and snow melting agents(CaCl2) are spread over roads to ensure road safety during the winter season, since deterioration advances from the surface, scaling is seen on the surface concrete due to deterioration which combined freezing damage and salt damage. Especially, In cold northern districts, the spreading amount of deicing salts increases by regulation of studded tire use, and the scaling of the concrete products, the various parts of concrete structures for roads is increasing in recent years. In this study, L-shape concrete curb were targeted, the permeable form method with the commercial permeable sheet was applied to it and the improvements of the quality were examined. By the permeable form method, surface layers got strengthened, which prevented permeation of the deterioration factor from the outside, and the scaling resistance of the upper surface where the permeable sheet was applied improved exceedingly. It will be expected by applying the permeable form method to various concrete products that frost resistance improves and scaling damage decreases.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.270-275
• /
• 2009

Sound absorption characteristics of membrane system which are used in stadiums and arenas were investigated. Theoretical studies on acoustic properties of single and double leaf permeable membrane conducted. Also, experimental studies on sound absorption characteristics of combined membrane system that is composed of outer and inner membrane material were conducted. In this study, sound absorption characteristics of each membrane were investigated by experiments in reverberation chamber. 4 types of permeable membranes and a non-permeable membrane were used for experiments. Air space behind membrane material and tension on the membrane was varied. Sound absorption performance of permeable membrane materials was confirmed. As increasing air space behind the membrane material, sound absorption coefficient was increased. In a resonance absorption frequency band sound absorption coefficient varied more dramatically. Sound absorption characteristics were flat in mid and high frequency range and sound absorption coefficient was from 0,3 to 0,5. Also sound absorption coefficient was increased by the increment of surface density and air permeability of membrane. However, over the certain value of air permeability, sound absorption coefficient was decreased. These results can be used as design factors and method for the room acoustic design of dome-stadiums and large free-form buildings.

• 한국건축시공학회지
• /
• 제9권1호
• /
• pp.49-55
• /
• 2009

In this study, reduction methods of surface air void were examined for high performance concrete having high viscosity. The effects of assumed influencing factors such as form types, form-coating materials, tamping equipments and methods were examined based on the tests on mock-up specimens made of high performance concrete. The test results can be summarized as follows: As for form types, the most favorable results were obtained when coated plywood form was used with panel-shape tamping equipments at the contact region with concrete, the second and the third being the water/air-permeable sheets and steel with coated plywood, respectively. As for tamping equipments, a vibrator with 6.5cm diameter was most effective. Finally, the shorter the tamping intervals, the better the reduction effect of surface air void. As a conclusion, an improved method was proposed to reduce surface air void and it was verified with the test result that only four air voids as large as $5{\sim}10mm$ are found in the are of $1m^2$.

• 대한기계학회논문집A
• /
• 제39권9호
• /
• pp.859-869
• /
• 2015

횡등방성 압전재료에 기하학적 비대칭인 쐐기균열문제를 해석하였다. 기계적 집중면외하중과 전기적 집중 면내하중이 쐐기표면 점에 작용하고 있고, 반면에 균열면 한점에는 기계적 집중하중만 작용한다. 균열면은 침투형 얇은 슬릿으로 가정하여, 전기변위의 수직성분 및 전위가 균열면을 가로질러 연속으로 두었다. Mellin 변환을 사용하여 문제를 수식화하고, Wiener-Hopf 식을 유도하였다. 이 식을 풀므로써 폐형으로 주어지는 해를 얻었다. 임의 균열길이나 경사각, 쐐기각에 대해서도 적용이 가능한 응력 및 전기변위 강도계수를 구하였다. 장의 강도계수들은 전기적 하중에는 무관하고, 전기변위강도계수는 응력강도계수만의 함수로 표현되었다. 전기장 강도계수는 영으로 계산되었다. 또한 에너지방출률을 얻었다. 이 해는 중첩에 의하여 임의로 분포하는 전기기계하중문제에 대한 해를 제공하는 기본해로 사용될 수 있다.

• Advances in nano research
• /
• 제10권4호
• /
• pp.349-357
• /
• 2021

In present study, the numerical investigations are carried out for effects of suction and blowing on boundary layer slip flow of casson nano fluid along permeable stretching cylinder in an exponential manner. The modeled PDEs are changed into nonlinear ODEs through appropriate nonlinear transformations. Change in physical quantities like friction coefficient, Nusselt and Sherwood numbers with variation of the aforementioned parameters are also examined and their numerical values are listed in the form of tables. Effects of Reynold number, suction parameter, Prandtl number, Lewis number, Brownian motion parameter and thermophoresis parameter are seen graphically with temperature profile.

• Environmental Engineering Research
• /
• 제24권3호
• /
• pp.456-462
• /
• 2019

Hydrocarbon contamination is among the most challenging problems in soil remediation. Electrokinetic method can be a promising method to remediate hydrocarbon-contaminated soils. Electrokinetic method consists of different transport phenomena including electro-migration, electrophoresis, and electroosmotic flow. Electroosmotic flow is the main transport phenomenon for hydrocarbon removal in soil porous media. However, the main component of hydrocarbons is the hydrophobic organic which indicates low water solubility; therefore, it makes the electroosmotic flow less effective. The objective of the present study is to enhance electrokinetic remediation of diesel-contaminated silty sand by increasing the solubility of the hydrocarbons in the soil and then increase the efficiency. For this purpose, sodium dodecyl sulfate (SDS) was used as a catholyte. In this content, SDS 0.05 M was used as catholyte and $Na_2SO_4$ 0.1 M was used as an anolyte. Low (1 V/cm) and high (2 V/cm) voltage gradients were used in periodic and continuous forms. The best removal efficiency was observed for high voltage gradient (2 V/cm) in a periodic form, which was 63.86. This result showed that a combination of periodic voltage application in addition to the employment of SDS is an effective method for hydrocarbon removal from low permeable sand.

• 약학회지
• /
• 제30권1호
• /
• pp.31-41
• /
• 1986

Sarcolemmal membrane fraction from canine ventricle was isolated from the discarded pellet after the first homogenization in the isolation procedure of sarcoplasmic reticulum (Method 1) and the protein yield, purity, and sidedness of this preparation were compared to those of sarcolemmal fraction prepared by method of Lee et al. (Method 2) and a slight modification of original protocol of Jones et al. (Method 3). Method 1 differed from Method 2 essentially only in that vigorous homogenization was carried out by omnimixer and homogenization medium containing 30mM Tris-maleate was used in the first step. The sarcolemmal fraction was enriched from 45 to 50 and 29-fold in [$^3H$] ouabain, [$^3H$] DHA, [$^3H$] QNB binding and $Na^+$, $K^+$-ATPase activity, respectively, compared to homogenate. Total $Na^+$, $K^+$-ATPase activity of highly sarcolemma enriched fraction was 144.6$\pm$16.4$\mu\textrm{mol}$ Pi/mg protein/hr, which was about 85%, of total ATPase activity, and the yield of the preparation was 15.7 mg protein per 100g of starting ventricular tissue. The sarcolemmal preparation supported $^{45}Ca^{2+}$-uptake in the presence of ATP but this uptake was not dependent on oxalate. Sarcolemmal $Na^+$, $K^+$-ATPase activity and detectable [$^3H$] ouabain binding were increased about 32% and 35%, respectively, by pretreatment of sarcolemmal fraction with optimal concentration of sodium dodecylsulfate (0.3-0.4mg/mg protein), suggesting that this preparation contained about 24% of sealed rightside-out vesicles, 26% of sealed inside-out vesicles, and 5001o of freely permeable (leaky) form. This procedure showed the highest protein yield and leaky population, compared to Method 2 and 3. On the other hand, sarcolemmal fraction prepared by Method 2 and 3 showed low value in protein yield but comtained high population of inside-out (46%) and rightside-out (49%) vesicles, respectively, compared to present procedure (Method 1). The results indicate that vigorous homogenization decreases the population of sealed sarcolemmal vesicles but increases the sarcolemmal protein yield per gram tissue and that this procedure is available for further purification of sarcolemmal fraction and for the receptor binding study of sarcolemma.

• 센서학회지
• /
• 제21권3호
• /
• pp.229-234
• /
• 2012

The existing permeability measurements based on pressure differential between the polymer membrane that is permeable to measure the amount of oxygen used, but these methods must be kept in a vacuum, and the measurement of the membrane with low permeability in the membrane is too time consuming. In recent years by using electrochemical method polymer membrane currents caused by the amount of oxygen is a measure of how much is used. In this study, apparatus consisting of one anode and six cathodes for multi-oxygen permeability tester used the same number of membranes produced by electrochemical oxygen permeation characteristics. In this study, one silver/silver chloride anode electrochemical method with a hexagonal sensor to put various kinds of polymer membranes with the six oxygen permeability for simultaneous measurement in real-time systems. Six cathodes (Pt), and one of the coil-shaped anode (Ag/AgCl) to form a hexagonal one of the polarographic oxygen sensor in a single measurement system by six sensors. Each sensor for making hexagonal specificity of the sensor to compensate for the conditions obtained in a pure nitrogen gas and pure oxygen gas conditions. With this study, self-developed hexagonal sensor capable of measuring sensors and oxygen permeability tester, for a multi-six different oxygen permeability characteristics of the membrane measured at the same time.

• 한국산학기술학회논문지
• /
• 제17권10호
• /
• pp.27-33
• /
• 2016

군수품은 방한복을 중심으로 투습방수성 소재 적용이 확대되고 있다. 특히 혹한기에는 장병의 생존성 확보를 위해 피복의 투습방수 기능이 더욱 중요한데, 체온의 손실을 예방하기 위해 땀은 외부로 빨리 발산하고 외부의 수분은 인체로 침투되지 않도록 해야 하기 때문이다. 한편, 한국군은 투습방수 소재의 성능을 내수도와 투습도로 평가하고 있다. 투습도는 규정된 온도 및 습도 하에서 직물을 통과하는 수증기의 증발 양을 측정하는 것으로, 이 중 아세트산포타슘을 이용한 방법(KS K 0594)이 주로 적용되고 있다. 그러나 이 방법은 시약의 준비 절차가 간략히 제시되어 공인시험기관별로 시험에 대한 준비과정 등이 상이하게 적용되고 있으며 이로 인해 결과의 편차가 크게 발생되고 있다. 따라서 본 연구에서는 공인시험기관별로 아세트산포타슘을 이용한 투습도 시험의 절차를 비교하고, 결과에 영향을 미치는 인자를 분석하여 투습도의 차이를 없애기 위한 개선안을 도출한다. 개선안에 대해 공인시험기관별 투습도에 대한 결과의 차이를 분석하기 위해 유의수준(0.05)을 바탕으로 일원배치법으로 분석한 결과 투습도의 편차가 감소한 것을 확인하였다.

• 한국터널지하공간학회 논문집
• /
• 제9권2호
• /
• pp.133-141
• /
• 2007

굴착손상영역(EDZ)은 굴착으로 인해 현지 암반이 역학적으로 손상을 입게 되어 응력상태, 변위상태, 암반의 안정성, 지하수의 흐름상태 등에 변화가 일어나는 영역을 의미한다. EDZ의 역학적 특성과 관련한 많은 연구들이 수행되었지만, EDZ에서의 지하수 유동 특성에 관한 연구는 아직 부족한 수준이다. 따라서 본 연구에서는 굴착으로 인해 굴착면 주변의 수리적 간극이 늘어나는 영역을 산정하여 '수리적 굴착손상영역'이라 정의하고 이를 위해 수리-역학적 상호작용(coupling)해석을 수행하였다. 이는 개별 불연속면 망의 생성을 통한 역학적, 수리적 변화의 모사가 가능한 개별요소법(discrete element method; DEM)을 이용하여 수행하였다. 이를 통해 EDZ에서 지하수의 흐름에 영향을 미치는 각종 조건들(불연속면의 간극, 불연속면 군의 방향, 불연속면 군의 길이, 불연속면의 각도 등)의 변화와, 응력분포, 지하수의 유동 등으로 인해 수리적 간극 값이 어떻게 변화하는지를 파악하였다. 이 결과를 토대로 수리적 간극이 커지는 영역, 수리적 EDZ를 공동 주변의 불연속면 방향에 수직 방향으로 존재하는 타원형의 형태로 모델링 하였다.