• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.82-84
• /
• 2007

In this paper, the dynamic characteristic according to disturbance load of Permanent magnet Linear Synchronous Motor(PMLSM) is dealt with carefully. In order to analyze dynamic characteristics, the simulink of Matlab is used. And F.E.M. is used for calculation of the parameter of PMLSM. The measuring system of the dynamic characteristics is manufactured and experiment results are compared with simulation results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.316-320
• /
• 2004

This paper presents an advanced method for an initial pole position estimation of a PMLSM (Permanent Magnet Linear Synchronous Motor) that has an incremental encoder for servo applications but does not have Hall sensors as a magnetic pole sensor. The proposed algorithm finds either of two zero force positions and then the correct d-axis by appropriately using the secant method as a numerical method. It only requires the tuned current controller and the relative position information and so it can be simply applicable to a rotary PMSM. The experimental results show the validity of the proposed method with respect to accurate pole position estimation under the minimal moving distance during estimation process.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권9호
• /
• pp.459-464
• /
• 2006

The detent force by end-effect has an undesired influence on moving coil type Permanent Magnet Linear Synchronous Motor(PMLSM). So, the reduction of detent force by end-effect is especially required for the improvement of thrust characteristics. In this paper, in order to reduce detent force by end-effect, the auxiliary-teeth is installed at the end part of mover. It is also analyzed by Finite Element Analysis(FEA) and optimized by using neural network. By comparison, the detent force is reduced about 41.4[%] comparing to that of basic model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.778-779
• /
• 2008

본 논문에서는 보극을 이용한 영구자석형 선형동기전동기 (PMLSM)의 디텐트력 저감에 관한 새로운 기술을 제안하고자 한다. 디텐트력은 입력전류 없이 영구자석과 철심 코어의 상호 작용으로 발생되며 2개의 성분 즉 슬롯효과와 단부효과로 나눌 수 있다. 슬롯효과와 단부효과를 줄이기 위하여 보극의 위치와 반폐슬롯 길이 변화에 따른 디텐트력 특성을 2차원 유한요소법(FEM)을 이용하여 해석한다. 그리하여 수치해석과 실험결과를 이용하여 보극 설치가 디텐트력을 줄이기 위한 효과적인 방법임을 입증하고자 한다.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.118-123
• /
• 2013

This paper presents performance comparison between concentrated winding and distributed winding of IPMSM (Interior Permanent Magnet Synchronous Motors) which is recently used for light-weight railway applications. Motors are designed on various schemes and analyzed by using FEM (Finite Element Method) instead of EMCNM (Equivalent Magnetic Circuit Network Method) in order to take into account saturation and non-linear magnetic property. The overall performance such as torque, torque ripple, losses, demagnetization, efficiency, power density and so on are investigated in detail at the rated and maximum operating speed. The results of the analysis found that both concentrated and distributed winding IPMSMs are promising candidates for high power railway traction motor.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.144-149
• /
• 2013

This work deals with the optimal design of a coreless PMLSM (Permanent Magnet Linear Synchronous Motor) with consideration of rising winding temperature. The temperature distribution caused by copper loss in the coreless PMLSM was analyzed using a FEM (Finite Element Method). The thrust and current density where the winding temperature reaches the allowable temperature were calculated. The optimal model provides maximum thrust per unit weight.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.267-269
• /
• 2002

This paper presents the static characteristics of PMLSM considering the slotting effects of the primary core. To estimate the force ripple, PMLSM is analysed by the theoretical analysis and the F.E.M. The simulation values are compared with experimental ones.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.30-32
• /
• 2002

선형동기전동기는 고추력, 고정밀 운전을 요하는 시스템에 많이 사용되고 있는데, 추력 증가에 따른 추력 리플의 증가는 고정밀 위치제어에 어려움을 주기도 한다. 철심형 선형동기전동기에서는 자석 배열과 철심 치형상의 상호 관계에 의해 발생하는 디텐트력의 영향이 매우 크므로 이를 저감하기 위한 철심 구조의 설계가 필요하다. 본 논문에서는 실제 제작성을 고려하여 치와 철심부의 챔퍼링, 길이 변경, 자석 배열의 스큐 적용 등을 통해 선형동기전동기의 디텐트력을 저감하기위한 설계법을 제시하고 그 효과를 시험기의 제작 및 실험을 통해 증명하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권7호
• /
• pp.320-326
• /
• 2003

Slotless Permanent Magnet Linear Synchronous Motor (PMLSM) has good control ability but thrust density is low. So, this paper proposes inserted core type of slotless PMLSM to improve its thrust density. Inserting the core between windings of each phase, detent force is generated by the difference of magnetic resistance in an air gap. To minimize detent force, this paper applies the neural network to inserted core type of slotless PMLSM. The, Magnetic pole ratio, the width of the inserted core and the width of the coil are selected as a design parameter to minimize detent force. In comparison with inserted core type one, thrust ripple greatly decreases by minimizing detent force and also thrust increases in this optimal model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.72-74
• /
• 2001

This paper deals with a dynamic analysis and a position control for air-core type linear synchronous motor with Halbach array (HA) permanent magnet mover. The primary coils are designed to be air-cored, so the HA-PMLSM don't exist the detent force. The secondary HA array of PMs does not require any ferro-magnetic yoke and excites stronger magnetic flux density and closer to the sinusoids than a conventional PM array.