본 논문에서는 수동형 UHF RFID 태그 칩에 사용되는 저전력, 저면적 256b 비동기식 EEPROM을 설계 하였다. 먼저 EEPROM의 저전력 특성을 얻기 위해 1.8V의 공급전압을 사용하였고, 저전압 특성을 갖는 N-type Schottky Diode를 사용하여 Dickson Charge pump를 설계하였다. 그리고 주변회로에서의 저면적 설계를 위해 비동기식 인터페이스 방식과 Separate I/O 방식을 사용하였다. 그리고 DC-DC 변환기의 면적을 줄이기 위하여 Schottky Diode를 사용한 Dickson Charge Pump를 설계하였다. $0.18{\mu}m$ EEPROM 공정을 이용하여 설계된 16 행 ${\times}$ 16 열의 어레이를 갖는 256b EEPROM의 레이아웃 면적은 $311.66{\times}490.59{\mu}m^2$이다.
Purpose: The aim of this study was to investigate the association of telomere length with breast cancer risk. We simultaneously explored the association between telomerase reverse transcriptase gene polymorphisms and telomere length. Methods: We used real-time quantitative polymerase chain reaction to measure relative telomere length (RTL) in genomic DNA extracted from peripheral blood from 183 breast cancer cases and 191 healthy controls. Genotyping was performed using the Sequenom MassARRAY platform. Results: Our results show that breast cancer patients had significantly shorter RTLs than control subjects (p<0.05). When the RTLs were categorized into tertiles, we found that the lowest RTL was significantly associated with increased breast cancer risk compared with the highest RTL (odds ratio [OR], 2.33; 95% confidence interval [CI], 1.40-3.90; p=0.001). Subgroup analyses indicated that risk of breast cancer was also significantly increased in the lowest RTL compared with the highest RTL in age >40 years (OR, 2.41; 95% CI, 1.31-4.43;p=0.005), body mass index ${\leq}24kg/m^2$ (OR, 2.81; 95% CI, 1.55-5.10; p=0.001), and postmenopausal women (OR, 3.94; 95% CI, 1.63-9.51; p=0.002), respectively. In addition, individuals with the AA genotype of rs2853677 have longer telomeres than those of breast cancer patients with the AG genotype (p=0.011). Conclusion: Our results suggest that shorter RTL was associated with an increased risk of breast cancer. An association was found between the AA genotype of rs2853677 and longer RTLs in the case group. Functional studies are warranted to validate this association and further investigate our findings.
본 논문에서는 정해진 시간 내에 프레임을 전송해야 하는 텔레메트리 시스템에 적용하기 위한 실시간 운영체제 기반의 PCM 엔코더를 제안한다. 대형 비행체의 경우 각 센서 및 주변장치로부터 많은 상태 정보들을 계측하므로 시스템의 복잡성이 높아지는 추세이다. 또한 계측 데이터가 많아지면서 정해진 시간 내에 프레임을 전송하기 위한 PCM 엔코더의 역할이 중요해지고 있다. 기존 일반적인 엔코더는 규격이 변경되거나, 추가 기능 구현 시 유연성이 떨어지므로 이를 보완하기 위한 설계가 필요하다. 이에 작은 임베디드 소프트웨어에 탑재가 가능한 실시간 운영체제인 uC/OS-II를 적용한 PCM 엔코더 설계를 제안한다. 또한, 타당성을 확인하기 위해 태스크의 실행시간을 측정하는 시뮬레이션을 수행하여 성능을 확인하였다.
기능강화동적쐐기는 쐐기 형태의 선량 분포를 만드는 방법과 선량 특성적인 면에서 금속쐐기와 상당한 차이를 가지고 있다. 기능강화동적쐐기의 임상적용을 위해서는 금속쐐기와 다른 선량특성을 분석하고 이에 따른 적절한 커미셔닝이 필수적이다. 본 연구의 목적은 기본 선량계측인자에 기초한 기능강화동적래기와 금속쐐기의 선량특성을 분석하는 데 있다 선량 계측학적 특성을 나타내는 심부선량분포, 조사면 주변 선량, 표면선량, 실효 쐐기인자, 쐐기의 선량측면도를 측정, 분석하였다. 또한 열린 조사면과 금속쐐기와의 비교측정을 통해 기능강화동적쐐기가 가지고 있는 고유한 특성을 분석하였다. 기능강화동적쐐기의 선량측면도 측정은 Chamber Array 24 (CP24)를 이용하였으며, Golden Segmented Treatment Table (Golden-577)로 구현한 치료 계획 장치의 계산 값과 비교하였다. 또한 실호쐐기인자 측정은 각각의 X, Y 콜리메이터에 따른 특성을 분석하였다. 심부 선량 백분율측정에서 열린 조사면과 기능강화쐐기의 비교결과, $0.2\~0.5\%$ 이내로 일치하였고, 금속 쐐기인 경우 약 $2\%$의 비교적 큰 차이를 보였다. 조사면 주변선량측정에서는 금속쐐기가 약 $1\%$ 높았다. 표면선량 측정 결과, 금속쐐기가 약 $10\%$ 낮게 평가되었다 기능강화쐐기의 실효쐐기인자는 Y jaw가 커짐에 따라 연속적으로 감소됨을 알 수 있었다. X jaw에 따른 쐐기인자 의존도 측정에서는 X jaw에 따른 의존도는 거의 없는 것으로 평가되었다. 또한 비대칭 조사면의 쐐기 인자측정에서는 비대칭에 상관없이 Y jaw의 크기만 같으면 실효쐐기인자가 같았다. 선량측면도 측정에서는 CA24를 이용해 얻은 실측값과 Golden STT로 Cadplan에서 구현한 계산 값이 $1\%$이내로 일치하였다. 본 연구를 통해 기능강화동적쐐기가 가지고 있는 특성을 분석하였으며, 금속쐐기를 대체할 수 있는 유용한 도구임을 알 수 있었다.
연구배경: 말초혈액 단핵구는 정상적인 면역반응에 중요한 세포로서 탐식 기능과 항원 제공 기능외에 다양한 종류의 Cytokine을 생성하며, 이중 IL-8은 호중구에 대한 강력한 주화 작용과 직접적인 활성화 작용 등을 통해서 염증 작용을 증폭시키는 역할을 하는 것으로 알려져 었다. 따라서 IL-8 작용의 억제를 통하여 항염 효과를 기대할 수 있으며, 이러한 작용을 나타낼 것으로 기대되는 Dexamethasone, $PGE_2$, Indomethacin 및 IFN-$\gamma$를 이용하여 이러한 약제들이 말초혈액 단핵구에서 내독소 자극에 의한 IL-8의 생성 자극 효과에 어떤 영향을 미치는 지에 대해서 알아보았다. 방법: 말초혈액 단핵구는 자원자에게서 채취한 혈액을 Ficoll Hypaque density gradient method에 의해서 백혈구 층을 분리한 뒤에 플라스틱 접시에 부착함으로써 분리하였다. Dexamethasone, $PGE_2$, Indomethacin은 내독소로 자극하기 한 시간 전, 후에 처치하였고, IFN-$\gamma$는 내독소로 자극하기 한 시간 전에만 전처치 하였다. 내독소로 자극한 뒤 4시간 뒤에 RNA를 extraction한 뒤 Northern blot analysis를 시행하여 IL-8 mRNA를 분석하였고, 24시간 뒤에 ELISA를 통하여 IL-8 단백을 정량하였다. 이 과정을 3회 반복하여 다음과 같은 결과를 얻었다. 결과: 1) Dexamethasone의 전, 후 처치는 내독소 자극에 의한 IL-8 mRNA와 단백의 생성을 감소시켰다. 2) IFN-$\gamma$의 단독 투여는 내독소 자극을 받지 않은 군에서 IL-8 mRNA와 단백의 생성을 감소시켰다. 3) 내독소 투여 전에 IFN-$\gamma$를 전 처치 하였을 때, 내독소 단독 투여군에 비해 IL-8 mRNA 발현은 감소하였으나 IL-8 단백의 분비에는 차이가 없었다. 4) $PGE_2$와 Indomethacin은 각각 사용한 농도($10^{-6}M$, $10{\mu}M$)에서는 내독소 자극에 의한 IL-8 mRNA 및 단백의 생성에 별다른 영향을 미치지 못하였다. 결론: Dexamethasone은 말초혈액 단핵구에서 내독소의 자극에 의한 IL-8 mRNA 발현 및 단백의 생성을 억제함으로써 염증 반응을 억제할 것으로 기대된다.
본 논문에서는 역추적 비터비 디코더의 순서적 역방향 상태천이 제어에 의한 새로운 생존 메모리 제어와 복호기법을 제안한다. 비터비 알고리즘은 채널오류의 검출과 정정을 위한 부호기의 상태를 추정해서 복호하는 최우추정 복호기법이다. 이 알고리즘은 심볼간 간섭의 제거나 채널등화 등 디지털 통신의 광범위한 분야에 응용되고 있다. 반복연산의 과정을 내포하고 있는 비터비 디코더에서 처리속도의 향상과 함께 VLSI 칩 설계시 점유면적의 삭감을 통한 칩 사이즈의 축소 및 소비전력의 저감 등을 달성하기 위해서는 새로운 구조의 ACS 및 생존 메모리 제어에 관한 연구가 요구되고 있다. 이를 해결하기 위한 하나의 방안으로, 본 논문에서는 역추적 기법에 의한 복호과정에서 역방향 상태천이의 연속적인 제어에 의한 자동 복호 알고리즘을 제안한다. 제안방식은 기존의 방법에 비해 전체 메모리 사용량이 적을 뿐만 아니라 구조가 간단하다. 또한, 메모리 억세스 제어를 위한 주변 회로구성이 필요 없고, 메모리 억세스를 위한 대역폭을 줄일 수 있어 칩 설계시 area-efficiency가 높고 소비전력이 적어지는 특성이 있다 시스톨릭 어레이 구조 형태를 갖는 병렬처리 구성과, 채널잡음을 포함한 수신 데이터로부터의 복호와 구체적인 응용 시스템에 적용한 결과를 제시한다.
본 논문은 3GPP LTE(Long Term Evolution)-TDD(Time Division Duplexing) 표준을 기반으로 NI(National Instruments)의 USRP RIO SDR(Software Defined Radio) 플랫폼을 이용해 28 GHz 밀리미터파 대역에서 HD 비디오를 무선으로 송수신하는 1T-1R(1 Transmitter-1 Receiver) 시스템을 설계 및 구현하였다. 해당 시스템은 Verilog로 설계한 LTE-TDD 송수신 모뎀을 USRP RIO에 내장된 Xilinx Kintex-7칩에 구현하여 USRP RIO를 베이스밴드로 사용하였으며, USRP RIO에서 송수신되는 신호는 자체 설계한 28 GHz RF 송수신 모듈로 업 다운 변환을 수행한 후 자체 설계한 $4{\times}8$ 서브 배열 안테나를 통해 최종적으로 HD 비디오 데이터를 통신하게 된다. USRP RIO와 Host PC의 통신 방식은 데이터 송수신시 발생되는 지연을 최소화하기 위해 PCI express(Peripheral Component Interconnect express)${\times}4$를 사용하였다. 구현한 시스템은 25.85 dBc 이상의 높은 EVM(Error Vector Magnitude) 성능을 보였으며, 실험환경 내 어디서든 HD 비디오를 성공적으로 송수신 하였다.
CAM대사를 수행하는 것으로 추정되는 한국산 바위솔속식물 3종(난장이바위솔, 바위솔, 둥근바위솔)의 엽육조직이 전자현미경적으로 연구되었다. 다육질성의 이들 엽육조직은 주로 세포의 크기가 큰 수분저장 세포들로 구성되어 있고 세포간극이 잘 발달되어 있다. 세포내 또는 세포간극에는 점액성 분비물질들이 분포하였다. 수분저장 세포에는 하나 또는 여러 개의 큰 액포가 있고 이들이 세포체적의 대부분을 차지하여 세포질은 세포벽 주위에서 매우 적게 분산되어 나타났다. 세포질내에는 다수의 엽록체, 미소체, 미토콘드리아, 소포체, 골지체 등의 전형적인 세포소기관외에 엽록체주변에서 관찰되는 세포질의 특이한 분포양상을 비롯하여 세포벽과 분리되어 나타나는 파상(undulation or invagination)의 세포막과 이중막으로 둘러싸인 원형질막 기원소포(plasmalemmasome)및 수초상구조(myelin-like structure), 액포상구조(vacuole-like structure) 또는 낭상구조(bladder-like structure) 등이 발견되었다. 특히 파상의 세포막 및 액포막의 신장으로 형성된 액포상 또는 낭상구조와 엽록체주변 세포질의 특이한 분포양상 등은 주목할 만한 것으로 이들의 특성 및 구조는 CAM대사와 연계되어 자세히 연구되어야 할 것이다. 이와 같은 엽육조직의 구성 및 미세구조적 특성으로 보아 본 바위솔속 식물들은 CAM대사를 수행하는 식물군으로 사료된다.
한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
/
pp.975-976
/
1993
This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}
본 연구에서는 국내 대형할인점의 확산을 효과적으로 설명하기 위해 기업의 정보와 구매자의 구전으로 확산을 설명하는 Bass모형에 제3의 요소로 공간적 영향력을 고려하였다. 국내 대형할인점의 확산은 확산중심지인 서울경인지역에서 저차중심지인 4개 지역권역으로 확산되는 형태를 보임에 따라 공간적 영향이 중요하게 작용할 것으로 기대된다. 본 연구에서 공간적으로 구분된 시장 A(확산중심지)가 시장 B(저차중심지)에 미치는 영향이 완전히 통제되지 못하는 상황에서 시장 A가 시장 B에 미치는 공간적 영향을 다국가확산모형(multinational diffusion model)을 확장한 공간확산모형(spatial diffusion model)을 이용하여 정의하였다. Bass모형과 공간확산모형의 모수추정을 통해 두 가지 정보전달경로와 관련된 혁신계수와 모방계수로 확산을 설명하는 Bass모형보다 공간확산모형이 국내 대형할인점 확산을 더욱 효과적으로 설명하는 것으로 나타났다. 또한 혁신중심지인 서울경인과 4개 지역권역의 소매환경을 나타내는 개념적 거리에 따라 공간확산모형에서 공간적요인의 영향력이 달라질 것이 기대되어 공간확산계수와 소매환경변수간의 상관관계를 살펴보았고, 연구결과 확산중심지에서 저차중심지에 대한 공간적 영향력은 저차중심지의 소매환경이 확산중심지의 소매환경과 유사할수록 크다는 것을 밝혀내었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.