• 한국해양학회지
• /
• v.5 no.2
• /
• pp.41-51
• /
• 1970

Periodic characters of water temperature in the regions of the Mishima and the Okinoshima were derived through the analysis of the five days interval data during 1914 to 1970 mainly. In terms of ten days mean temperatures, annual variation function of the Mishima region, Korea Strait, is F($\theta_d$)=17.45-5.34 cos $\theta_d$-3.77 sin $\theta_d$+0.62 sin $2\theta_d$ -0.52 sin $3\theta_d$, where $\theta_d$=$\frac{\pi}{18}$(d-2), d is the order of ten days period 1 to 36. And in the region of Okinoshima, Tsushima Strait, we find F($\theta_d$)=18.88-5.39 cos $\theta_d$-3.60 sin $\theta_d$+0.52 sin $2\theta_d$. The annual mean temperature is 17.4$^{\circ}C$ in the Mishima region, 18.9$^{\circ}C$ in the Okinoshima region, and the amplitudes of annual variation functions are 7$^{\circ}C$ in both regions with minimum temperature in the middle ten days of February, maximum in the middle ten days of August. The long term variations of surface water temperature with 12 5 years period were observed in the annual mean temperature, monthly mean temperatures and the fixed day temperatures of every year. In addition to these, relatively short term variations were also found significant periods of 3 years, 4 years and 2 years, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.12
• /
• pp.83-88
• /
• 2008

The QPP interleaver has been gaining attention since it provides contention-free interleaving functionality for high speed parallel turbo decoders. In this paper we first show that the quadratic term $f_2x^2%K$ of $f(x)=(f_1x+f_2x^2)%K$, the address generating function, is periodic. We then introduce a low-power address generator which utilizes this periodic characteristic. This generator follows the conventional method to generate the interleaving addresses and also to save the quadratic term values during the first half of the first period. The saved values are then reused for generating further interleaved addresses, resulting in reduced number of logical operations. Power consumption is reduced by 27.38% in the design with fixed-K and 5.54% in the design with unfixed-K on average for various values of K, when compared with the traditional designs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.7
• /
• pp.543-552
• /
• 2013

For the safety messages in IEEE 802.11p/WAVE vehicles network environment, strict periodic beacon broadcasting requires status advertisement to assist the driver for safety. In crowded networks where beacon message are broadcasted at a high number of frequencies by many vehicles, which used for beacon sending, will be congested by the wireless medium due to the contention-window based IEEE 802.11p MAC. To resolve the congestion, we consider a MAC scheme based on slotted p-persistent CSMA as a simple non-cooperative Bayesian game which involves payoffs reflecting the attempt probability. Then, we derive Bayesian Nash Equilibrium (BNE) in a closed form. Using the BNE, we propose new congestion control algorithm to improve the performance of the beacon rate under saturation condition in IEEE 802.11p/WAVE vehicular networks. This algorithm explicitly computes packet delivery probability as a function of contention window (CW) size and number of vehicles. The proposed algorithm is validated against numerical simulation results to demonstrate its stability.

• Korean Journal of Digital Imaging in Medicine
• /
• v.10 no.1
• /
• pp.21-28
• /
• 2008

Diagnostic display monitor QA according to AAPM TG18 is usually performed by PACS administrator, product manager and reading doctor, and for acceptance testing and periodic quality control evaluation, a combination of visual and quantitative tests can be used, as outlined in sections 5 and 6 of 'assessment of display performance for medical imaging systems'. Although many display tests can be performed visually, a more objective and quantitative evaluation of display performance requires special test tools. The required instruments vary in their complexity and cost, depending on the context of the evaluation(research, acceptance testing, or quality control) and how thorough the evaluation needs to be. Objective and reliable assessment of many display characteristics can be performed with relatively inexpensive equipment, So, we made 'AAPM TG18 guiding instrument' to ues variable purpose of the evaluation of 'geometrical distortions(quantitative"', 'veiling glare(visual)' and 'sensor calibration'. The spatial measurements for the quantitative evaluation of geometric distortions, and the measurement of the veling-glare ring response function which provides information regarding the spatial extent of the luminance spread, can be performed using the TG18 guiding instrument can be used to sensor calibration to standardize the basic rate of 0% luminance when periodic calibration.

• Korean Journal of Optics and Photonics
• /
• v.12 no.2
• /
• pp.83-90
• /
• 2001

The Talbot effect for periodic objects with the spatial period p illuminated by expanded coherent light is analyzed by Fresnel diffraction theory, and the Talbot distance (Zr) at which we can observe 1: 1 imaging without any lenses can be defined. We confmned experimentally the Talbot imaging of line, circular, X -type and '||'&'||'copy;-type 2 dimensional alTay gratings at ZT. At the same time, we observed phase reversed Talbot imaging at Zr/2 and Talbot subimage with p/2 at Zr/4 and 3Zr/4. The visibility of Talbot images as a function of the number of slits of the input grating was measured by the FFf (Fast Fourier Transform) results of these images. As a result stationary maximum visibility of V = 0.25 was obtained from grating numbers with more than 15 slit pairs.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.1-7
• /
• 2011

The objective of this study was to improve the performance of the existing individual-tree/distantindependent stand growth model in predicting the growth of Pinus koraiensis forest stands. The parameters of diameter growth and mortality prediction models were estimated using periodic annual increment (PAI) of permanent plots and the performance of the models were compared with that of the existing ones using mean anuual increment (MAI). The diameter growth model includes crown ratio, potential diameter growth and modifier to compute for competitions of trees of a stand. In deriving the mortality prediction model, the parameters were estimated based on PAI which was also estimated as the function of MAI due to the lacking of permanent plot data. The results of this study showed that the newly-estimated functions based on PAI provide more realistic patterns in diameter growth of individual trees. The new approach using PAI in mortality model seems to overcome the over-estimate problem by the MAI-based model in estimating mortality of stand trees.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.485-492
• /
• 2000

In the rail facilities the rail track consists of rail tie fastening accessories and bed,. The rail track is largely divided into Ballast Bed Track(BBT) and Concrete Bed Track(CBT) according to the type of bed. In this thesis among Concrete Bed Track slab track which is used for the Japanese high speed railway is a target of this study. Dynamic analysis by using finite element method are performed. where moving rain load is periodic function. Then through parametric study some conclusions are obtained as follow. Cement Asphalt Mortar(CAM) affects contrary mechanical behavior to rail and slab greatly. Therefore change of CAM spring coefficient should be handled with care, For slab thickness thin slab is more profitable to reduction of vibration of rail than thick one but mechanical capacity of slab is deteriorated, Improved structural type is proposed then structural analysis is performed for this one. This type is effective to reduction of vibration of railway system.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.12
• /
• pp.691-697
• /
• 2000

A fiberoptic sensor using a low-coherence SLD as a light source has been studied. The sensor system employing an intrinsic fiber Fabry-Peort interferometer as a sensing tip and a fiber Mach-Zehnder interferometer as a processing one, overcomes the ambiguous reading caused by the highly periodic natrue of conventional high-precision interferometric sensors and provides unambiguous identification of the desired phase among several candidates on the transfer function of an interferometric signal. A tentative application to the temperature sensor shows the potential that the fiberoptic sensor has a side-dynamic range of $0-900^{\circ}C$ as well as reasonable resolution higher than $0.1^{\circ}C$ without ambiguity. Due to the inherent property of the optical fiber itself and the intrinsic fiber Fabry-Perot interferometer, the proposed fiberoptic sensor will give obvious benefits when it is applied to harsh environments to monitor some physical parameters such as temperature, strain, pressure and vibration.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.816-816
• /
• 2009

In order to attenuate structural waves in railway track, damped mass-spring absorber system and spring supported system are considered that are attached continuously along the beam length. A mathematical model is presented for the propagation of structural waves on a finitely long, periodically supported classical beam. The model in this paper could represent a railway track where the beam represents the rail and an appropriately chosen support type represents the pad/sleeper/ballast system of a railway track. And in this study, it is presented that the measurement method of health monitoring of railway track.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.4
• /
• pp.284-295
• /
• 2003

The servo tracks of disk drives are constructed at the time of manufacture with the equipment of servo track writer. Because of the imperfection of servo track writer, disk vibrations and head fluctuations during servo track writing process, the constructed servo tracks might deviate from perfect circles and take eccentric shapes. The servo track writing error should be corrected because it might cause interference with adjacent tracks and irrecoverable operation error of disk drives. The servo track writing error is repeated every disk rotation and so is periodic time function. In this paper, we propose a new correction algorithm of servo track writing error based on iterative teaming approach. Our correction algorithm can learn iteratively the servo track writing error as accurately as is desired. Furthermore, our algorithm is robust to system model errors, is computationally simple, and has fast convergence rate. In order to demonstrate the generality and practical use of our work, we present the convergence analysis of our correction algorithm and some simulation results.