• Journal of Radiation Protection and Research
• /
• 제11권1호
• /
• pp.65-69
• /
• 1986

Picker C-9 $^{60}Co$원격치료장치에 의한 선량분포의 비대칭을 물팬톰에 의한 측정으로부터 발견하고 비대칭적인 선량분포의 원인이 선원의 비정상적인 'ON' 위치였음을 확인하였다. 선원이 비정상적인 위치에서 정지하게 된 원인이 선원을 'OFF'위치로 되돌리는 태엽의 일부 인접면이 접촉하게되어 마찰의 발생과 증대였음을 확인하였다. 태엽에 윤활유를 쳤을 때 선량분포의 대칭성이 다소 호전되었지만 근본적인 해결책은 태엽을 교체하는 것이다. 예방대책으로는 주기적인 선량분포의 측정에 의한 확인과 보수유지계획에 의한 관리가 수행되어야 할 것이다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.81-87
• /
• 2001

동적 변화가 상존하는 건설환경에서, 보수·리모델링 프로그램의 관리자는 자원하의 복수 프로젝트를 조정·관리하는데 어려움을 겪게 된다. 프로그램에 내재하는 불확실성과 상호종속성으로 인해, 단위작업의 지연과 그로 인한 연쇄적인 공정계획의 동요는 프로그램 전체의 안정성과 관리가능성을 저해한다. 본 논문은 먼저 건설관리에 적용되었던 생산관리기법들이 프로그램관리에 적용될 수 있는가를 살펴본 후, 프로그램 내부의 자원유동의 흐름에 주기적으로 버퍼를 설치하는 공정 안정화 모델을 제안하고자 한다. 몬테-칼로 시뮬레이션에 의한 비교실험으로 제안된 버퍼 관리모델의 성능을 프로그램의 생산성, 유연성, 그리고 안정성의 관점에서 분석하였다.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.42-48
• /
• 2006

The strategies of maintenance and operation are usually established based on the number of flaws and their size distribution obtained from nondestructive inspection in order to preserve safety of the plant. But non destructive inspection results are different from the physical flaws which really exist in the equipments. In case of a single inspection, it is easy to estimate the number of physical flaws using the POD curve. However, we may be faced with some difficulties in obtaining the number of physical flaws from the periodic in-service non destructive inspection data. In this study a simple method for estimating the number of physical flaws from periodic in-service nondestructive inspection data was proposed. In order to obtain the flaw growth history, the flaw growth was simulated using the Monte Carlo method and the flaw size and the corresponding POD value were obtained for each flaw at each periodic inspection time. The flaw growth rate used in the simulation was statistically calculated from the in-service inspection data. By repeating the simulation numerous flaw growth data could be generated and the effective POD curve was obtained as a function of flaw size. From the effective POD curve the number of physical flaws was obtained. The usefulness and convenience of the proposed method was evaluated from several applications and satisfactory results were obtained.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권5호
• /
• pp.58-65
• /
• 2016

최근 이슈가 되고 있는 도심지 지반함몰로 인하여 주기적인 하수관로 조사의 필요성이 강조되고 있다. 일반적으로 수행되는 조사 방법 중 하나인 하수관로 CCTV조사는 상당한 시간과 노력이 소요된다. 기존 연구들은 주로 하수관로 조사에 소요되는 노력을 줄이기 위한 H/W 및 S/W의 개발에 관한 연구가 주를 이루고 있다. 그러나 기존 CCTV 탐사장치를 이용하여 관리담당자가 보관하고 있는 수많은 조사영상를 활용하기 위한 연구는 진행되지 않았다. 본 연구는 cross-correlation기법 기반의 이미지프로세싱 방법을 적용하여 CCTV 조사영상의 자막으로부터 장치의 위치정보를 추출하였다. CCTV 장치의 시간-거리 관계를 분석한 결과 탐사 장치가 정지시간과 하수관로의 손상 사이의 강한 상관관계를 확인하였다. 제안된 CCTV영상의 분석법을 활용하는 경우 CCTV조사 보고서 작성 및 관리에 소요되는 노력을 줄임으로써 하수관로 유지관리의 효율성과 신뢰도를 높일 수 있을 것으로 기대된다.

• The Journal of Advanced Prosthodontics
• /
• 제8권4호
• /
• pp.321-328
• /
• 2016

PURPOSE. This study was designed to investigate the maintenance of teeth and implants in patients with viral liver disease. MATERIALS AND METHODS. 316 patients without any significant systemic disease were selected as a control group. Liver disease group was consisted of 230 patients. Necessary data were collected using clinical records and panoramic radiographs. Then, the patients were subdivided into 2 groups based on the type of active dental therapy received before maintenance period (Pre-Tx). Analysis for finding statistically significant difference was performed based on the need for re-treatment of active dental therapy (Re-Tx) and change in the number of teeth (N-teeth) and implants (N-implants). RESULTS. Comparing to control group, the patients with liver disease showed higher value on N-teeth, N-implants, and Re-Tx. Statistically significant differences were found on N-teeth (P=.000) and Re-Tx (P=.000) in patients with non-surgical Pre-Tx. Analysis based on severity of liver disease showed that N-teeth and Re-Tx were directly related to severity of liver disease regardless of received type of Pre-Tx. Significant differences were found on N-teeth (P=.003) and Re-Tx (P=.044) in patients with non-surgical Pre-Tx. CONCLUSION. In this study, it was concluded that liver disease might influence the loss of teeth and cause the relapse of dental disease during maintenance period in patients. A significant positive relationship between tooth and implant loss and severity of liver disease seems to exist.

• Nuclear Engineering and Technology
• /
• 제40권7호
• /
• pp.615-624
• /
• 2008

In this paper, the contribution of task types and error types involved in the human-related unplanned reactor trip events that have occurred between 1986 and 2006 in Korean nuclear power plants are analysed in order to establish a strategy for reducing the human-related unplanned reactor trips. Classification systems for the task types, error modes, and cognitive functions are developed or adopted from the currently available taxonomies, and the relevant information is extracted from the event reports or judged on the basis of an event description. According to the analyses from this study, the contributions of the task types are as follows: corrective maintenance (25.7%), planned maintenance (22.8%), planned operation (19.8%), periodic preventive maintenance (14.9%), response to a transient (9.9%), and design/manufacturing/installation (6.9%). According to the analysis of the error modes, error modes such as control failure (22.2%), wrong object (18.5%), omission (14.8%), wrong action (11.1 %), and inadequate (8.3%) take up about 75% of the total unplanned trip events. The analysis of the cognitive functions involved in the events indicated that the planning function had the highest contribution (46.7%) to the human actions leading to unplanned reactor trips. This analysis concludes that in order to significantly reduce human-induced or human-related unplanned reactor trips, an aide system (in support of maintenance personnel) for evaluating possible (negative) impacts of planned actions or erroneous actions as well as an appropriate human error prediction technique, should be developed.

• Molecules and Cells
• /
• 제27권5호
• /
• pp.497-502
• /
• 2009

In mouse embryos, somite formation occurs every two hours, and this periodic event is regulated by a biological clock called the segmentation clock, which involves cyclic expression of the basic helix-loop-helix gene Hes7. Hes7 expression oscillates by negative feedback and is cooperatively regulated by Fgf and Notch signaling. Both loss of expression and sustained expression of Hes7 result in severe somite fusion, suggesting that Hes7 oscillation is required for proper somite segmentation. Expression of a related gene, Hes1, also oscillates by negative feedback with a period of about two hours in many cell types such as neural progenitor cells. Hes1 is required for maintenance of neural progenitor cells, but persistent Hes1 expression inhibits proliferation and differentiation of these cells, suggesting that Hes1 oscillation is required for their proper activities. Hes1 oscillation regulates cyclic expression of the proneural gene Neurogenin2 (Ngn2) and the Notch ligand Delta1, which in turn lead to maintenance of neural progenitor cells by mutual activation of Notch signaling. Taken together, these results suggest that oscillatory expression with short periods (ultradian oscillation) plays an important role in many biological events.

• 전기학회논문지
• /
• 제65권4호
• /
• pp.695-703
• /
• 2016

The maintenance method for the electrical facility of high speed railway has been evolved from inspection by personnel to the automated way by the detection devices. In particular, the signalling equipment in order to increase the safe and efficient operation of the trains is required to maintain normal operation by periodic maintenance. Because the return current gives the most important effects to the wayside equipment in case of the failures, a method is needed to measure the unbalanced rate of return current on the train at high speed driving. The Hot Box Detector(HBD) device that is installed at track-side has a function to recognize the abnormal axle box by detecting the temperature that occurs in the axle of train passing over its device. In order to implement the measurement equipment for unbalanced rate of return current and axle temperature, the design method is proposed and the experimental test results by test bed are included in the paper.

• 대한치과의사협회지
• /
• 제55권1호
• /
• pp.22-29
• /
• 2017

Purpose : Preservation of the periodontal health of the treated patient requires supportive periodontal therapy for the elimination of periodontal disease. After Phase I therapy is completed, patients are placed on a schedule of periodic recall visits for maintenance care to prevent recurrence of the disease. The amount of tooth loss would be the most relevant criterion in an evaluation of the effect of periodontal treatment, but this would require studies with extremely long follow-up periods. Thus the most commonly used outcome criteria in clinical research have been clinical attachment level change, reduction of pocket depth and bleeding frequency. The purpose of this case study is to identify the effect of supportive periodontal therapy after periodontal flap surgery. Materials & Methods : Following routine hygienic phase of treatment, patients with chronic periodontitis received surgical periodontal treatment. Bleeding on probing, pocket depth and clinical attachment level were measured at baseline, pre-operation and 1 year follow up. All procedures were performed by one operator. Results : One year a total of 28 patients (58sites) to recheck remained, when conducted maintenance program after periodontal flap surgery was observed reduction of bleeding frequency, pocket depth and improvement of clinical attachment level. Conclusion : The results from this study indicate that supportive periodontal therapy after periodontal flap surgery is effective for reduction of bleeding frequency, pocket depth and gain of clinical attachment level.

• 한국컴퓨터정보학회논문지
• /
• 제13권4호
• /
• pp.45-50
• /
• 2008

계량기의 지침을 인식하고 수도 관리 사업소로 데이터를 전송하기 위한 검침모듈은 전원을 전력선으로 이용할 수 없다. 따라서, 검침모듈은 배터리를 이용해야 하므로 주기적으로 소모된 배터리를 교체하는 유지보수 문제가 발생한다. 유지보수 비용을 절감하기 위해 전원 소모를 줄이면서 무선으로 데이터를 전송 할 수 있는 방안이 필요하다. 본 논문에서는 효율적인 전원관리를 통하여 배터리 소모량을 줄이면서 고객계량기의 지침을 자동으로 인식하고, RF를 이용하여 검침 데이터를 전송 할 수 있는 원격검침 모듈을 설계하였다.