• School Mathematics
• /
• v.1 no.1
• /
• pp.217-234
• /
• 1999

The first part of this paper examines the assumptions underlying traditional types of standardized testing compared with assumptions underlying innovative types of performance assessment. The second part focuses on directions for the future. The third part gives examples from closed related projects which were designed to find practical ways to implement recommendations.

• Journal of Biomedical Engineering Research
• /
• v.31 no.5
• /
• pp.365-374
• /
• 2010

This paper is about the personal identification algorithm using an ECG that has been studied by a few researchers recently. Previously published algorithm can be classified as two methods. One is the method that analyzes ECG features and the other is the morphological analysis of ECG. The main characteristic of proposed algorithm uses together two methods. The algorithm consists of training and testing procedures. In training procedure, the features of all recognition objects' ECG were extracted and the PCA was performed for morphological analysis of ECG. In testing procedure, 6 candidate ECG's were chosen by morphological analysis and then the analysis of features among candidate ECG's was performed for final recognition. We choose 18 ECG files from MIT-BIH Normal Sinus Rhythm Database for estimating algorithm performance. The algorithm extracts 100 heartbeats from each ECG file, and use 40 heartbeats for training and 60 heartbeats for testing. The proposed algorithm shows clearly superior performance in all ECG data, amounting to 90.96% heartbeat recognition rate and 100% ECG recognition rate.

• Korean Journal of Clinical Pharmacy
• /
• v.26 no.1
• /
• pp.6-12
• /
• 2016

Objective: This study aimed to explore the readability and comprehensibility of the drug information on a patient leaflet for the senior by employing performance-based user-testing. Methods: We included 36 elderly (65 years old or older) as the senior group (intervention group) and 36 adults (40~59 years old) as the adult group (control). We developed a questionnaire to test if participants could access to drug information. After completing a questionnaire, the participant was interviewed about their understanding over the patient leaflet. We performed t-test, ${\chi}^2$-test or Fisher's exact test to examine differences between two groups in primary outcomes. Results: The senior were less likely able to find information (78%) than the adult (91%); they were much less likely able to understand information (42%) than the adult (69%). While we found differences between the ability of finding and understanding drug information in both groups, the senior group had greater difficulties in understanding all kinds of drug information. They had significant difficulties to remember information after reading the patient leaflet and frequently failed to find proper information even though they were allowed to access freely to the leaflet during interviewing. Conclusion: To secure safe and effective use of drugs for the senior, it is necessary to develop drug leaflets for the senior.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.11 no.4
• /
• pp.7-13
• /
• 2015

The efficiency, reliability and performance of any heat pump unit can only be ascertained after it has been tested and rated. For this reason, specific facilities, equiped with testing plants are built. Heat pump calorimeter is the facilities used by most of these testing facilities in their rating and certification process. The ultimate function of calorimeters is to, control and maintain the constant standard test conditions (indoor/outdoor entering temperatures and flow rate etc) during testing period. In this study, the test standards of heat pump unit and the structure of the calorimeter are surveyed. In addition, this study analyzes the total energy consumption of a water to water heat pump calorimeter. Heat pump calorimeter consumed much energy to excute the heat pump tests. The energy consumption of the calorimeter was higher than the heat pump unit, and it was increased as the heat pump unit capacity decreased.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.6
• /
• pp.284-292
• /
• 2005

Because all of the short-circuit testing laboratories have the limitation of test facilities, the synthetic making test methods have been used to estimate the short-circuit making performance of the ultra high-voltage circuit breaker as the alternative to direct test methods. So, KERI(Korea Eelctrotechnology Research institute) has completed the construction of the synthetic making test facilities using the low capacity step-up transformer method which fulfill the requirements specified in newly revised IEC 62271-100 Edition 1.1(2003) and have the testing capability up to 550kV, 63kA full-pole circuit breaker. The test facilities using the low capacity step-up transformer method presented in this paper are made up of the unit equipments such as HCS(High-speed Closing Switch), ITMC(Initial Transient Making Current) circuit and UP TR(low capacity step-up transformer) and have the operating range of 17.6$^{\circ}$ $\~$ 145.1$^{\circ}$ for testing the circuit breaker rated on up to 50kA and 43.1$^{\circ}$ $\~$ 119.6$^{\circ}$ for more than 50kA.

• Advances in aircraft and spacecraft science
• /
• v.2 no.3
• /
• pp.303-328
• /
• 2015

A design methodology is presented to develop the hingeless control surfaces for MAV using adhesively bonded Macro Fiber Composite (MFC) actuators. These actuators have got the capability to deflect the trailing edge surfaces of the wing to attain the required maneuverability, besides achieving the set aerodynamic trim condition. A scheme involving design, analysis, fabrication and testing procedure has been adopted to realize the trailing edge morphing mechanism. The stiffness distribution of the composite MAV wing is tailored such that the induced deflection by piezoelectric actuation is approximately optimized. Through ground testing, the proposed concept has been demonstrated on a typical MAV structure. Electromechanical analysis is performed to evaluate the actuator performance and subsequently aeroelastic and 2D CFD analyses are carried out to see the functional requirements of wing trailing edge surfaces to behave as elevons. Efforts have been made to obtain the performance comparison of conventional control surfaces (elevons) with morphing wing trailing edge surfaces. A significant improvement in lift to drag ratio is noticed with morphed wing configuration in comparison to conventional wing. Further, it has been shown that the morphed wing trailing edge surfaces can be deployed as elevons for aerodynamic trim applications.

• Current Photovoltaic Research
• /
• v.7 no.3
• /
• pp.71-75
• /
• 2019

Solar energy is one of the renewable energy sources. It can respond to expanding energy demand. A solar cell module is designed to have a durability that can be developed over a long period of 25 years to be installed outdoors and perform like a stable power supply. We need Standard Test Condition (STC)-based power output data before and after testing to measure the power output of existing modules. The modules are shown to reduce power output by comparing data before and after outdoor experiments regardless of whether they are indoor or outdoor. It is easy to compare the power output quantities through the module simulator in the indoor. However, it takes a lot of testing time and costs to compare the power output on outdoor in the case of a high number of modules and distance from the module simulator. It can save time and costs if we can check the power output using the data in outdoor. We have used the long-term outdoor test to find the elements out that corresponds to the reductions in power output quantities. We have conducted research that matched the actual and the tests.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1626-1633
• /
• 2021

In an industrial field, non-destructive testing (NDT) is commonly used to inspect industrial products. Among NDT methods using radiation sources, X-ray laminography has several advantages, such as high depth resolution and low computational costs. Moreover, an X-ray laminography system with stationary source array and compact detector is able to reduce mechanical motion artifacts and improve inspection efficiency. However, this system, called stationary inverse-geometry X-ray laminography (s-IGXL), causes truncation artifacts in reconstructed images due to limited fields-of-view (FOVs). In this study, we proposed a projection data correction (PDC) method to reduce the truncation artifacts arisen in s-IGXL images, and the performance of the proposed method was evaluated with the different number of focal spots in terms of quantitative accuracy. Comparing with conventional techniques, the PDC method showed superior performance in reducing truncation artifacts and improved the quantitative accuracy of s-IGXL images for all the number of focal spots. In conclusion, the PDC method can improve the accuracy of s-IGXL images and allow precise NDT measurements.

• Journal of the Korean Statistical Society
• /
• v.30 no.3
• /
• pp.511-527
• /
• 2001

This paper consider the testing problem of variance component for the unbalanced tow=-way error component model. We provide a conditional LM test statistic for testing zero individual(time) effects assuming that the other time-specific(individual)efefcts are present. This test is extension of Baltagi, Chang and Li(1998, 1992). Monte Carlo experiments are conducted to study the performance of this LM test.

• Fire Protection Technology
• /
• s.13
• /
• pp.12-17
• /
• 1992

This report is announced about test results of manually actuated signaling boxes(manual call points) and audible signal appliances (alarm bell), so as to occupants, inhabitants or persons di-rectly concerned with the implementation and direction of emergency action initialation is the area protected. The testing plan was progressed devided by three testing items, external appearance inspec-tion, performance test and environment proof test. The purpose of this report is to analyze the characteristics of products.