• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.237-245
• /
• 2020

In decades, active sonar, which transmits signals and detects incident signals reflected by underwater targets, has been significantly studied since passive sonar in Anti-Submarine Warfare (ASW) detection performance becomes lowered, as underwater threats become their radiated noise reduced. In general, active sonar using Hull-Mounted Sonar (HMS) adjusts vertical tilt (depression) and sequentially transmits multiple Linear Frequency Modulation (LFM) subpulses which have non-overlapped bands, i. e. 1 kHz ~ 2 kHz, 2 kHz ~ 3 kHz, in order to reduce shadow zones. Recently, however, Generalized SFM (GSFM), which is generalized form of SFM, is proposed, and it is confirmed that subpulses of GSFM have orthogonality among each other depending on setting of GSFM parameters. Hence, in this paper, we applied GSFM to active target detection using HMS to improve the performance by the signal processing gain obtained from enlarged bandwidths of GSFM subpulses compared to those of LFM subpulses. Through simulation, we verified that when the number of subpulses is three, the matched filter gain of GSFM is approximately 5 dB higher than that of LFM.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.19 no.2
• /
• pp.19-30
• /
• 2013

Purpose: The planning and design of hospital generally requires the participation and consultation of skilled experts since it has more complex space program than any other buildings. Therefore, the BIM systems for the planning of hospital have been tried continuously. The purpose of this study is to identify the precondition for space Program validation of healthcare architecture based on BIM, which is recently receiving wide attention. Method: For this study, United States, Australia and Finland's guidelines were analyzed among the description space program validation system in 14 overseas BIM Guidelines. And the propose precondition that can be applied to healthcare architecture from among these description of space program validation items, target, process etc for General building. Result: 1) spatial program validation is the following four evaluation phase. Step 1: Standard setting phase Step 2: BIM model accuracy assessment phase Step 3: space validation phase Step 4: Performance evaluation phase 2) The standards for the building elements at Standards Setting stage is considered to the standards for the architectural elements of General building. 3) Healthcare Architecture Area calculation method is considered to be reasonable that borrowing the area calculation standard of general architecture according to the UIA of international standards. However, Be proposed of measuring method that reflect the efficiency of the design process step-by-step area calculation method. The performance assessment indicators of reflect the Hospital uniqueness have to developed. And the research needs to be carried out continuously according to the purpose for healthcare architecture of feature-oriented. Implications: In this paper like to understanding that precondition of space program validation considering the BIM. As a result, understanding to condition about step of the evaluation, the evaluation standards. Is expected to keep the focus on the development of performance indicators that reflect the uniqueness of the hospital for the efficient evaluation of the Hospital building.

• Women's Health Nursing
• /
• v.5 no.1
• /
• pp.146-165
• /
• 1999

The purpose of this paper was to identify the performance of health promoting lifestyles and health perception over 18 years old women living Wonju city so that the results will be based for setting up women's health nursing center. The subjects were 1080 women selected by stratified and purposive sampling. The data were collected by self reporting questionnaire and interview from May to June, 1998. Data were analyzed by SPSS win program. The results were as follows : 1. The range of age was 18-84 years, The proportion according to women's lifecycle was premarital group 20.0%, delivery and rearing group 49.9%, over middle aged-elderly group 29.8%. 2. The mean menarchial age was 15.2 and menopausal age was 48. Mean frequenices of pregnancy is 2.4 and artificical abortion rate is 36.4%. Primary cause of abortion was unwanted babies 42.8%. The practice rate of family planning was 79.4% and permanent sterilization rate was 37.6%. 3. Fatigue was predominated problem in target population. Depression and headache was predominated in premarital group, headache and nervous felling in delivery and rearing group, arthritis and loss of memory in over middle aged-elderly group. 4. Only 13.7% of the target population make some efforts for their health in compare to 85.9% have attention for their health. Perception of unhealthy rate was 9.1% in premarital group, 24.8% in delivery and rearing group, 30.1% in middle aged-elderly group. 5. The average score of the HPLP(Health Promoting Lifestyle Profile) was 2.41. The variable with the highest degree of performance was interpersonal relationship, whereas the one with the lowest degree was the professional health maintenance. The significant difference was found in HPLP according to age, residential area, marital status, educational level, income level. 6. Majority(95.1%) of the target population agreed on necessity for women's health nursing center. Proper location area was presented to women's center and public health center. The priority for health education program was proper diet, family health, stress management, and exercise. In conclusion, we should prepare the education program for women's health according to women's lifecycle, because health perception, HPLP, and education program needed was differentiated in women's lifecycle. Also we suggest that women's health nursing center based community was needed for proper management of women's health.

• Journal of Korea Multimedia Society
• /
• v.11 no.8
• /
• pp.1146-1159
• /
• 2008

This paper proposes a method for determining material property of a haptic model which represents the haptic behavior of a target object. This paper also presents a haptic rendering framework. We adapt elastography to obtain the physical property of a target object. One of the key differences between the proposed framework and a traditional method is that the physical property of the target object can be easily set into a haptic model. For evaluating the proposed method, we construct a real-time palpation prototype simulator. In our work, a human liver is selected as a target object and the liver is represented by Shape-retaining Chain Linked Model(S-chain model) for satisfying the real-time performance. We conduct experiments whether a user easily distinguishes abnormal portions from normal portions. From the experimental results, we evaluate that the proposed method provides the discriminable force to users in real-time.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.31-37
• /
• 2021

In this paper, we propose an outlier detection algorithm called C-SCGP to prevent the degradation of localization performance based on RSS (Received Signal Strength) and AOA (Angle of Arrival) in the presence of outliers in wireless sensor networks. Since the accuracy of target estimation can significantly deteriorate due to various cause of outliers such as malfunction of sensor, jamming, and severe noise, it is important to detect and filter out all outliers. The single cluster graph partitioning (SCGP) algorithm has been widely used to remove such outliers. The proposed continuous-SCGP (C-SCGP) algorithm overcomes the weakness of the SCGP that requires the threshold and computing probability of outliers, which are impratical in many applications. The results of numerical simulations show that the performance of C-SCGP without setting threshold and probability computation is the same performance of SCGP.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.1
• /
• pp.58-64
• /
• 2016

This study presents a design method for a single-loop voltage controller that is suitable for an arbitrary waveform generator (AWG). The voltage control algorithm of AWG should ensure high dynamic performance and should attain sufficient robustness to disturbances such as inverter nonlinearity, sensor noise, and load current. By analyzing the power circuit of AWG, control limitation and control target are presented to improve the dynamic performance of AWG. The proposed voltage control algorithm is composed of a single-loop output voltage control, an inverter current feedback term to improve transient response, and a load current feedforward term to prevent voltage distortion. The guideline for setting control gain is presented based on output filter parameters and digital time delay. The performance of the proposed algorithm is proven by experimental results through comparison with the conventional algorithm.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.6
• /
• pp.487-496
• /
• 2012

Recently, utilization of building foundations as ground-coupled heat exchangers has attracted much attention because they reduce the cost and enhance the heat transfer. The objective of this study is to evaluate the performance of energy-slab ground-coupled heat exchanger installed in a commercial building. In order to demonstrate the energy transfer characteristics of the energy-slab, experiments were conducted from October 2010 to September 2011. The 1-year measurement results showed that the mean EWTs of brine returning from the energy-slab were $9.6^{\circ}C$ in heating season and $24.9^{\circ}C$ in cooling season, which were in a range of design target temperatures. In addition, the geothermal heat pump system with the energy-slab showed on-off operation according to the setting temperatures of secondary fluid in water storage tank. The results also showed that the energy-slab extracted heat of 198.6 kW from the ground and injected heat of 318.9 kW to the ground, respectively.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.1
• /
• pp.93-103
• /
• 2022

The main purpose of this study was to gauge the patient satisfaction index and subsequently discuss the Importance-Performance (IP) matrix analysis of the inpatient services in the context of the private hospital setting. The Malaysian Customer Satisfaction Index Model was employed as the theoretical framework for the above purposes. This study involving 242 patients in Malaysian's private healthcare sector used a Web-based survey as the main method of data collection. Partial least square structural equation modeling (PLS-SEM) was utilized for data analysis. Using Fornell et al. (1996)'s formula, the resulting patient satisfaction index was slightly lower than the "very satisfied" category, the target level required for positioning as one of the world's premier medical tourism players. The IP matrix showed that medical quality is the main competitive advantage of the private hospitals that can propel their growth in the global healthcare marketplace. The results also indicate that outcome quality, patient rights, and privacy, and service quality are the three quality domains that need to be prioritized for further improvement. On the other hand, the servicescape quality domain needs to be strategized as the unique selling proposition as the performance of the private hospitals in this regard is already extremely good.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.186-189
• /
• 2005

In a clinical setting, developing a reliable method for the automated drug infusion system would improve a drug therapy under the unexpected and acute changes of hemodynamics. The conventional proportional-integral-derivative (PID) controller might not be able to achieve maximum performance because of the unexpected change of the intra- and inter-patient variability. The fuzzy PID control and the conventional PID control were tested under the unexpected response of mean arterial blood pressure (MAP) to a vasopressor agent during acute hypotension. Compared with the conventional PID control, the fuzzy PID control performed the robust MAP regulation regardless of the unexpected MAP response (average absolute value of the error between target value and actual MAP: 0.98 vs. 2.93 mmHg in twice response of the expected MAP and 2.59 vs. 9.75 mmHg in three-times response of the expected MAP). The result was due to the adaptive change of the proportional gain in PID parameters.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1151-1156
• /
• 2002

This paper describes the examples of Noise, Vibration and Harshness(N.V.H) development applying Computer Aided Engineering(CAE). Some Commercial Software was used to reduce the cost, development time and to predict the Noise and vibration phenomenon of new vehicle design. This paper is including measured and analysis data, and tried to prove the good correlation between measured and calculated data, so test and analysis data were compared seriously and carefully. Analysis models, which were used to predict and develop the NVH phenomenon, analysis method, and a field of --0application are explained briefly. Also, model pictures are presenting in this paper. This paper describes the analyzing method of the calculated results, design modification and development procedure, and NVH performance target setting up and procedure.