• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2016년도 춘계학술대회 논문집
• /
• pp.404-430
• /
• 2016

본 연구는 과학기술계 정부출연 연구기관 평가에서 논문의 질적 평가를 위해 새로 도입된 피인용도 지표가 성과지표의 구성요건 중 적시성을 충족할 수 있는가라는 문제의식에서 출발하였다. 이에 피인용 반감기와 즉시성 지수 등 논문의 주기적 특성을 분석 활용하여 실질적인 질적 성과체계로 전환하기 위한 기관평가의 개선방향을 제시하고자 한다. 연구 결과로 기술의 발달과 의존성이 높아짐에 따라 학문의 변화속도 또한 빠르게 변화하고 있으나, 공공기술은 타 분야에 비해 인용속도가 느리고, 산업과 연관된 분야는 지식이전 속도가 빠른 것으로 분석되었다. 또한, 학문분야 특성에 따른 피인용 주기는 차이가 없었으며, 각 분야의 질적으로 우수한 논문의 평가 시 피인용 지수의 타당성을 확보하기 위해서는 6년정도의 기간이 누적된 데이터가 필요한 것으로 분석되었다. 분야별 질적 성과평가를 위해 필요한 피인용의 시간적 특성을 기술통계적으로 도출한 결과를 반영하여 임무중심형 연구기관 평가의 문제점을 도출하였다. 이를 개선하기 위한 객관적이고 타당한 질적 평가를 위한 정책적 대안을 평가주기적, 평가기준적, 평가관리적 관점으로 제시하였다.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.79-86
• /
• 2009

Recently PMSM(Permanent magnet synchronous motor) are used for the various direct drive applications such as index table, telescope system and so on. Because the position/speed control performance of direct drive PMSM is directly affected by the torque ripple, there are lots of studies to reduce the cogging torque in the motor design stage. In order to verify the motor design, the reliable cogging torque measurement system is essentially required. The measured motor must be rotated in the constant speed under 1deg/sec so that the cogging torque profile is measured correctly. In this study, the cogging torque measurement system which uses the direct drive PMSM and the speed controller to rotate the measured motor in 0.1rpm(0.6deg/sec) has been developed. Simulink/xPC target was used for the controller and data acquisition system. Based on PI controller, DOB and AFC have been applied to eliminate the low frequency disturbances and the periodic speed ripple. The experimental results show the good performance of the speed regulation for the reference speed 0.1rpm and the reliable profile of the measured cogging torque by the developed speed controller.

• 대한핵의학회지
• /
• 제21권2호
• /
• pp.175-182
• /
• 1987

For measurement of ventricular performance, ejection fraction (EF) has gained wide acceptance. But EF is influenced not only by changes in muscle function but also by changes in cardiac loading conditions. In case of valvular heart disease which is variable in loading conditions, EF cannot be reliable as an index of myocardial contractility. The end systolic pressure (ESP)-end systolic volume (ESV) relation, howver, is known to represent myocardial contractility, independent of changes in loading conditions. Similar results can be obtained by using peak-systolic pressure (PSP) instead of ESP. To evaluate the utility of the peak systolic pressure-end systolic volume index (PSP-ESVI) relation as an index of myocardial function, we measured $PSP&ESVI$ in 19 partents with coronary artery disease before $(PSP_1\;&\;ESVI_1)$ and after $(PSP_2\;&\;ESVI_2)$ sublingual administration of nitroglycerin. PSP was measured with standard mercury sphygmomanometer during gated blood pool scintigraphic study. ESVI was measured by count derived method after attenuation correction. $PSP_2\;&\;ESVI_2$ measurement was started when the fall of PSP was greater than 5 mmHg after 7-14 minutes post-administration of nitroglycerin. Mean values $({\pm}S.D.)$ of $PSP_1\;&\;ESVI_1$ was $124.9({\pm}20.7)mmHg\;&\;59.4({\pm}39.9)ml/M^2$. Mean values $({\pm}S.D)$ of $PSP_2\;&\;ESVI_2$, was $113.2({\pm}19.9)mmHg\;&\;37.5({\pm}26.1)ml/M^2$. There was a significant difference between mean values of $PSP_1\;&\;PSP_2$, (p<0.01), and mean values of $ESVI_1\;&\;ESVI_2$, (p<0.01). $PSP_1-PSP_2/ESV_1-ESVI_2,\;PSP_1/ESVI_1$ and EF were in the range of 0.14-5.19 mmHg/ml/$M^2$, 0.67-7.68 mmHg/ml/$M^2$ and 10.8%-74.5% respectively. $PSP_1-PSP_2/ESVI_1-ESVI_2$, and EF showed exponential correlation (r=0.85, P<0.01). The correlation coefficient between $PSP_1/ESVI_1$ and EF was 0.73(p<0.01). With the above results, we suggest that $PSP_1-PSP_2/ESVI_1-ESVI_2$, and $PSP_1/ESVI_1$, can be used as an index of myocardial function.

• 한국정보시스템학회지:정보시스템연구
• /
• 제29권1호
• /
• pp.137-158
• /
• 2020

Purpose This study aims to analyze how entrepreneurs' morality affects entrepreneurship and social responsibility. The purpose of this study is to analyze the differences of entrepreneurship and social responsibility on corporate financial performance and social performance by measuring entrepreneurial morality index. Design/methodology/approach The research model is based on the existing literature related to morality, entrepreneurship, social responsibility, and corporate performance. In order to verify the research model, empirical analysis was conducted. The collected data were analyzed by Smart-pls 2.0 based on the structural equation model based measurement model verification and the structural model verification two - step approach. Using the bootstrapping method of PLS, 500 samples were constructed and hypothesis verification was performed. Findings The results of this study are as follows. In the case of general manufacturing companies, business people are more focused on improving corporate performance than morality, and have a somewhat consistent effect with entrepreneurial spirit that does not have a space of morality. When entrepreneurship is strengthened, financial performance and social performance. Business entrepreneurs in social enterprises are more aware of social responsibility than entrepreneurship, so they achieve both financial performance and social performance at the same time. As a result of this study, it was found that there is a difference in perception depending on the morality of the business people, entrepreneurship, social bookkeeping, and management performance according to the type of company.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권18호
• /
• pp.8513-8517
• /
• 2016

Background: GLOBOCAN12 recently reported high cancer mortality in Malaysia suggesting its cancer health services are under-performing. Cancer survival is a key index of the overall effectiveness of health services in the management of patients. This report focuses on Subang Jaya Medical Centre (SJMC) care performance as measured by patient survival outcome for up to 5 years. Materials and Methods: All women with breast cancer treated at SJMC between 2008 and 2012 were enrolled for this observational cohort study. Mortality outcome was ascertained through record linkage with national death register, linkage with hospital registration system and finally through direct contact by phone or home visits. Results: A total of 675 patients treated between 2008 and 2012 were included in the present survival analysis, 65% with early breast cancer, 20% with locally advanced breast cancer (LABC) and 4% with metastatic breast cancer (MBC). The overall relative survival (RS) at 5 years was 88%. RS for stage I was 100% and for stage II, III and IV disease was 95%, 69% and 36% respectively. Conclusions: SJMC is among the first hospitals in Malaysia to embark on routine measurement of the performance of its cancer care services and its results are comparable to any leading centers in developed countries.

• 대한물리치료과학회지
• /
• 제18권4호
• /
• pp.11-18
• /
• 2011

Purpose : This study attempts to assist stroke patients lead independent daily life movements by providing basic data for stroke patients' successful rehabilitation program and understanding the relationship between health beliefs of stroke patients and their guardians, and patients' rehabilitation performance level and daily life movement fulfillment ability. Methods : 23 stroke patients receiving treatments at rehabilitation specializing hospital after getting diagnosed with a stroke, along with 23 guardians were selected as research subjects, and health belief was measured by modifying supplementing Byun Young-Hee(2002)'s health belief measurement tool for leg movement disorder patients. Research findings revealed the following relationship between health beliefs of stroke patients and their guardians, and patients' rehabilitation performance and daily life movement fulfillment ability. Results : The patients group's initial MBI score was $33.13{\pm}3.46$, and measurement after four weeks was $38.43{\pm}3.47$. As health beliefs got stronger, MBI score increased significantly(p<.05). Correlation analyses of factors that affect rehabilitation attendance rate showed that perceived susceptibility, seriousness and usefulness were statistically significant, and perceived disability was not statistically significant(p<.05). Guardians' health belief index(susceptibility, seriousness, usefulness, disability) had no correlation with rehabilitation attendance rate. Conclusion : In order to increase daily life movement fulfillment ability of patients who are being treated with stroke, health beliefs must be raised to increase changes in daily life movement fulfillment ability. Therefore, it is believed that managing programs that can increase health beliefs of stroke patients can allow patients obtain positive health beliefs, further increase rehabilitation performance rate of stroke patients as well as independent daily life ability.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.281-281
• /
• 2010

Very low refractive index (<1.4) materials have been proved to be the key factor improving the performance of various optical components, such as reflectors, filters, photonic crystals, LEDs, and solar cell. Highly porous SiO2 are logically designed for ultralow refractive index materials because of the direct relation between porosity and index of refraction. Among them, ordered macroporous SiO2 is of potential material since their theoretically low refractive index ~1.10. However, in the conventional synthesis of ordered macroporous SiO2, the time required for the crystallization of organic nanoparticles, such as polystyrene (PS), from colloidal solution into well ordered template is typical long (several days for 1 cm substrate) due to the low interaction between particles and particle - substrate. In this study, polystyrene - polyacrylic acid (PS-AA) nanoparticles synthesized by miniemulsion polymerization method have hydrophilic polyacrylic acid tails on the surface of particles which increase the interaction between particle and with substrate giving rise to the formation of PS-AA film by simply spin - coating method. Less ordered with controlled thickness films of PS-AA on silicon wafer were successfully fabricated by changing the spinning speed or concentration of colloidal solution, as confirmed by FE-SEM. Based on these template films, a series of macroporous SiO2 films whose thicknesses varied from 300nm to ~1000nm were fabricated either by conventional sol - gel infiltration or gas phase deposition followed by thermal removal of organic template. Formations of SiO2 films consist of interconnected air balls with size ~100 nm were confirmed by FE-SEM and TEM. These highly porous SiO2 show very low refractive indices (<1.18) over a wide range of wavelength (from 200 to 1000nm) as shown by SE measurement. Refraction indices of SiO2 films at 633nm reported here are of ~1.10 which, to our best knowledge, are among the lowest values having been announced.

• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.51-56
• /
• 2015

The object of this study is to obtain the optimum mix proportion of halogen free compound with flame resistance and, for the purpose, thermal/electrical characteristics test are conducted using compatibilizing agents, flame resistance agents, hydroxide aluminum, sunscreen, antioxidant and silicon oil on the base resin of linear low density polyethylene (LLDPE), Ethylene vinyl acetate copolymer (EVA). Existing compound method accompanies many requirements to be satisfied including a lot of addition of flame resistance agents, prohibition of impact on mixing capability with base and property and etc. In this study, different from the existing method, the optimum mix proportion is determined and experimented by adding nano clay. Oxygen index test shows no difference between specimens while T-6, T-9 shows oxygen index of 29[%] and 26[%], respectively. This is concluded that hydroxide aluminum, which is a flame resistance agent, leads low oxygen index. From UL94-V vertical flame resistance test, the combustion behavior is determined as V-0, Fail based on UL94-V decision criteria. Viscometry shows low measurements in specimens with separate addition of compatibilizing agents or nano clay. Volume resistivity test shows low measurement mainly in specimens without compatibilizing agents. Therefore, with the flame resistance compound shows better performance for thermal/electrical property and the optimum mix proportion are achieved among many existing materials.

• 한국지반신소재학회논문집
• /
• 제19권1호
• /
• pp.45-53
• /
• 2020

철도분야에서도 계측자료를 바탕으로 머신러닝 기법을 이용하여 예측 분석하는 시도가 점차적으로 증가하고 있는 실정이다. 이 논문에서는 열차의 차상가속도 데이터를 기반으로 궤도의 품질을 결정하는 지표 중에 하나인 궤도품질지수를 머신러닝 기법을 활용하여 예측하였다. 머신러닝 기법으로 활용하고 있는 대표적인 3개의 모델로 궤도품질지수를 예측하여 가장 정확도가 높은 모델은 XGBoost으로 데이터셋에서 85% 이상의 예측정확도를 보였다. 또한 윤축과 대차의 z축의 진동가속도가 고저 궤도품질지수의 기여도가 높은 것으로 나타났으며, 이는 기존 연구결과와도 잘 일치하였다. 이러한 결과를 볼 때 단일 알고리즘인 서포터 벡터머신보다는 앙상블 알고리즘을 적용한 랜덤포레스트와 XGBoost이 정확도가 높은 것으로 판단된다. 따라서 머신러닝 기법에서 적용모델에 따라 정확도가 달라질 수 있기 때문에 차량진동가속도를 이용한 궤도품질지수를 예측하기 위해서는 앙상블 알고리즘을 가지는 모델을 적용하는 것이 적절할 것으로 판단된다.

• 대한화학회지
• /
• 제53권6호
• /
• pp.755-760
• /
• 2009

Styrene은 중합체와 공중합체로 널리 사용되어져 왔으며, 고 굴절률을 가지고 있기 때문에 콘택트렌즈 재료로 유용하게 사용된다. 본 연구는 styrene을 교차결합제인 EGDMA (ethylene glycol dimethacrylate)와 HEMA (2-hydroxyethyl methacrylate) 그리고 개시제인 AIBN (azobisisobutyronitrile)을 사용하여 공중합 하였다. 공중합한 안 의료용 재료의 물리적 특성을 측정한 결과 굴절률 1.4412-1.4628, 함수율 20-35%, 가시광선 투과율 82.6-87.0%, 인장강도 0.143-0.344 Kgf를 나타내었다. Styrene의 비율이 증가할수록 굴절률과 인장강도는 증가하였으며, 함수율은 감소하였다. 본 실험결과로 볼 때 생성된 공중합체는 기능성을 가진 고성능 콘택트렌즈 재료로 사용될 수 있을 것으로 판단된다.