• 패션비즈니스
• /
• 제19권6호
• /
• pp.28-41
• /
• 2015

Properties of textile fabrics influence the appearance, aesthetics, and performance of garment. Drape and related properties of fabrics affect profoundly the static and dynamic appearance during wearer's movement. The three dimensional shape of the folded structure often deforms with time or with subtle vibration around the fabric specimen during the drape measurement. Due to the uneven and complex nature of fabrics, the overall shape of the fabric specimen on the drape tester often becomes unstable. There is a need to understand the fundamental mechanisms of how draping may generate pleasing forms. Two drape test methods, conventional Cusick drape test, and in-built drape tester, based on a depth camera, are compared. Fabric specimens including cotton, linen, silk, wool, polyester, and rayon are investigated for the fabric drape and other physical/mechanical parameters. Drape coefficient values of fabric specimens are compared based on the final drape images, together with the intermediate 3D drape images of the specimens during elevation process of the drape tester equipped with a stepper motor system. The correlation coefficient between the data based on the two methods is reasonably high. Another advantage from the depth camera system is that it allows further analysis of three-dimensional information regarding the fabric drape shape, including the shape of nodes or crest and trough.

• 대한임베디드공학회논문지
• /
• 제10권1호
• /
• pp.13-23
• /
• 2015

Recently, a few image-processing based mobile urine testers have actively been studied since the urine-analysis result can be available to the user in real time immediately after the test is done. However, the accuracy of test result can be severely degraded due to variable illumination environments and a variety of manners to capture the image with a camera embedded in the smartphone according to different users. This paper proposes the Check4Urine system, a novel smartphone-based portable urine-analysis tester and provides three techniques to improve such a performance degradation problem robust to various test environments and disturbances, which are the compensation algorithm to correct the varying illumination effect, an urine strip detection algorithm robust to edge loss of the object image, and the color decision algorithm based on the pre-processed reference table. Experimental results show that the proposed Check4Urine system increases the accuracy of urine-analysis by 20-50% at various test conditions, compared with the existing image-processing based mobile urine tester.

• 한국정보통신학회논문지
• /
• 제11권12호
• /
• pp.2265-2270
• /
• 2007

본 논문은 IETF와 ITU-T에서 공동으로 권고하는 미디어 게이트웨이 제어 프로토콜인 MEGACO/H.248 기반의 미디어 게이트웨이 컨트롤러와 액세스 게이트웨이의 호 처리 성능 및 기능시험 연구에 관한 내용이다. 기존 PSTN망에서 서비스되고 있는 음성 트래픽을 IP망으로 통합하는 차세대 통합네트워크의 핵심적인 구성요소로서 미디어 게이트웨이 컨트롤러와 액세스 게이트웨이의 호 처리 성능 및 기능을 시험하기 위한 효과적인 방법 및 시험 시스템 구조에 관한 연구로, 특히 시험 환경 구축을 위해 액세스 게이트웨이에 접속되는 다수의 아날로그 라인들에 대한 가상 에뮬레이션 기능과, 미디어 게이트웨이 컨트롤러와 액세스 게이트웨이 시험을 위해, 프로토콜의 상대역할을 에뮬레이션하는 시험기로 동작하는 효과적인 방안과 그 타당성을 논의한다.

• Tribology and Lubricants
• /
• 제25권6호
• /
• pp.387-398
• /
• 2009

The operation condition of recently designed pistons for high power and high speed diesel engine become more severe due to the increment of combustion pressure and temperature. So, in order to overcome high temperature, the application of the mono-metal cast aluminum alloy piston featuring an enclosed cast-in open cooling gallery has increased. In this research, it is developed a PCJ (piston cooling jet) rig tester, described the test procedure and validated the performance of sample piston cooling gallery design. Then the test rig will be used for developing the design technology of piston cooling gallery. The test rig is composed with oil reservoir and pumping system, oil jet system, piston fixing and moving system, collecting oil measuring system, and data measuring and recording system. It will be measured collecting efficiencies under conditions of a few piston positions, oil jet pressures and oil viscosities for a piston cooling gallery. Furthermore, the PCJ rig tester will be used for the optimum design of the oil cooling gallery which being applied to increase the cooling efficiency of pistons in diesel engines satisfying the EURO V emission regulation and the more.

• 한국철도학회논문집
• /
• 제20권2호
• /
• pp.196-202
• /
• 2017

초고속열차 추진용 실모델 선형동기전동기(Linear Synchronous Motor, LSM)의 고속운전시험을 위해서는 매우 긴 노선이 필요하고, 이로 인해 막대한 비용이 요구되며, 개발 도중 시행오차가 발생할 경우 경제적 손실이 크게 발생할 우려가 있다. 따라서 저 비용의 축소모델을 이용한 LSM 설계 기술의 타당성 검증 연구가 개발 초기 단계에 이루어져야 한다. 회전형 구조를 갖는 LSM 축소모델을 적용한 성능시험기를 통하여 LSM의 지상전기자 권선의 최적방식 도출 및 기기적 특성 파악이 가능하며, 제어시스템의 선행연구 수행에 활용이 가능하다. 따라서 본 논문에서는 600km/h급 초고속열차 추진용 LSM의 요구사양에 부합하는 회전형 시험기의 설계 모델을 도출하고, 전자계 해석 및 기구적 강성 해석을 통하여 1500rpm 이상의 고속 회전 조건에서의 최적 모델을 도출하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.189-193
• /
• 2008

Performance of refrigerant oil at the thrust-bearing and at the journal-bearing of a scroll compressor is a significant factor. This paper presents the friction and anti-wear characteristics of nano oil with a mixture of a refrigerant oil and carbon nano particles in the journal bearing of scroll compressors. The characteristics of friction and anti-wear using nano-oil is evaluated using the disk on disk tester and the journal bearing tester for measuring friction surface temperature and the coefficient of friction at the journal bearing tester. In journal bearing test, the average friction coefficient of high concentration nano-oil was decreased down to 18% compared to raw oil under 4,500 N and 3,600 rpm. It is believed that nano particles can be coated on the wear surfaces and the interaction of nano particles between surfaces can be improved the lubrication in the friction surfaces. Worn surfaces of frictional specimen were measured with straightness. carbon nano oil enhances the characteristics of the anti-wear and friction at the joural bearing of scroll compressors.

• Tribology and Lubricants
• /
• 제39권6호
• /
• pp.256-261
• /
• 2023

This study is conducted to evaluate the durability of superhydrophobic surfaces, with a focus on two aspects: contact angle measurement and self-cleaning-performance analysis. Superhydrophobic copper and aluminum surfaces are fabricated using the immersion method and subjected to a rolling wear test, in which a 2 kg weight is placed on a rolling tester, under loaded conditions. To evaluate their durability, the contact angles of the specimens are measured for each cycle. In addition, the surface deformation of the specimens before and after the test is analyzed through SEM imaging and EDS mapping. The degradation of the self-cleaning performance is evaluated before and after the wear test. The results show that superhydrophobic aluminum is approximately 4.5 times more durable than superhydrophobic copper; the copper and aluminum specimens could endure 21,000 and 4,300 cycles of wear, respectively. The results of the self-cleaning test demonstrate that superhydrophobic aluminum is superior to superhydrophobic copper. After the wear test, the self-cleaning rates of the copper and aluminum specimens decrease to 72.7% and 83.4%, respectively. The relatively minor decrease in the self-cleaning rate of the aluminum specimen, despite the large number of wear cycles, confirms that the superhydrophobic aluminum specimen is more durable than its copper counterpart. This study is expected to aid in evaluating the durability of superhydrophobic surfaces in the future owing to the advantage of performing wear tests on superhydrophobic surfaces without damaging the surface coating.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2011년 춘계학술대회 논문집
• /
• pp.253-256
• /
• 2011

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2010년 추계학술대회 논문집
• /
• pp.89-92
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.220-224
• /
• 2005

The technology trend of Flat Panel Display (FPD) equipments have been demanded that there are compact and multi-function. Therefore, nano/micro scale patterned on polymeric materials of Back Light Unit (BLU) in Liquid Crystal Display (LCD) that has been investigated. This paper describes a series of Horizontal Type Micro Tensile Tester that were carried out to investigate the load strain distance performance of typical polymeric material sheets. The polymeric materials film that micro size shaped specimens for tensile test are used by Cold-Isostatic-Press (CIP). Test equipment is Horizontal type Micro Tensile Tester that is presented to measure the micro scale mechanical property of thin film for FPD. This paper presents which easy testing tools measure for micro patterned on polyethylene (PET) specimens.