• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.1-4
• /
• 2004

We proposed a new type of timing recovery scheme to work with a system that uses BCJR (Bahl-Cocke-Jelinek-Raviv) decoding algorithm and BPSK modulation. The unknown timing offset is estimated by the modified Mueller and $M\ddot{u}ller$ estimator with the aid of the decoder. Timing offset can be acquired as soon as the symbols are received and be updated symbol by symbol. The simulation results for turbo codes whose decoder uses BCJR algorithm show a satisfactory performance even in case of severe timing jitter.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.369-378
• /
• 2010

The creation of the hydraulic turbine flow factor map will undoubtedly benefit its design by decreasing both the design cycle time and product cost. In this paper, the geometry and flow variables, which effectively affect the flow factor, are proposed, analyzed and determined. These flow variables are further used to create the operating condition maps by using different model approaches categorized into Response Surface Method (RSM) and Artificial Neural Network (ANN). The accuracies of models created by different approaches are compared and the performances of model approaches are analyzed. The influences of chosen variables and the combination of Principle Component Analysis (PCA) and model approaches are also studied. The comparison results between predicted and actual flow factors suggest that two-hidden-layer Feed-forward Neural Network (FFNN), and one.hidden-layer FFNN with PCA has the best performance on forming this mapping, and are accurate sufficiently for hydraulic turbine design.

• 스마트미디어저널
• /
• 제5권1호
• /
• pp.69-77
• /
• 2016

본 논문은 분산 저장환경에 사용되는 RAID와 네트워크 가상화 기술을 융합하며 Software Defined Storaging 방법을 제안한다. 제안방법은 저장장치를 소프트웨어 기반으로 설계함으로써 유연한 제어 및 관리를 제공하여 물리적인 스토리지의 용량과 재해 복구비용을 절감할 수 있다. 제안된 Software-Defined RAID 기반의 장애복구 기법을 실질적인 퍼블릭 클라우드인 AWS와 구글 스토리지를 이용하여 실증 테스트 및 성능을 비교한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.288-289
• /
• 2005

As high temperature superconductor applications became a reality due to increase in coated conductor performance, it is important to understand their stability behavior to design safe electrical power systems. We have experimentally studied the dependence of quench and recovery characteristics of coated conductors on the amplitude of current and duration time. The sample used in the present study is stabilized with stainless steel. Stability tests of 3 cm long sample were performed in a liquid nitrogen bath cooling condition by applying a short period over current pulses for 50 and 100 ms, with amplitude up to ~ 6 times of the critical current. The transport current that follows before and after the current pulse was fixed about ~85% the critical current. We analyzed the quench recovery using the current voltage characteristic.

• 한국정보통신학회논문지
• /
• 제12권1호
• /
• pp.115-121
• /
• 2008

본 논문에서는 플라즈마 디스플레이 패널의 구동시 발생되는 전력손실을 최소화시키기 위한 에너지 회수기능을 가지는 새로운 서스테인 구동회로를 제안한다. 제안된 회로는 패널의 등가 커패시턴스와 외부 인덕터의 직렬공진을 이용하여 패널에 에너지를 공급/회수하게 된다. 제안된 에너지 회수 회로는 기존에 널리 이용되는 에너지 회수와 비교하여 저가형 구조로 구성이 가능하며 우수한 에너지 회수 성능을 가진다. 7.5인치 AC-PDP를 이용한 실험을 통해 제안된 회로의 타당성을 검증한다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.988-992
• /
• 2006

In recent semiconductor manufacturing clean rooms, air washers are used to remove airborne gaseous contaminants such as $NH_3,\;SO_x$ and organic gases from outdoor air introduced into clean room. Meanwhile, there is a large quantity of exhaust air from clean room. It is desirable to recover heat from exhaust air and use it to reheat outdoor air. In the present study, an experiment was conducted to investigate the heat recovery and gas removal efficiencies of a direct atomization type heat recovery air washer.

• 한국의류학회지
• /
• 제22권4호
• /
• pp.525-534
• /
• 1998

Cotton fabrics were finished with mixture of BTCA(1,2,3,4,-butanetetracarboxylic acid) and polyalkyleneoxide-modified amino-functional silicone by pad-dry-cure process to achieve better DP performance with a higher retention of physical properties as compared to those of finished with BTCA alone. The results indicated that BTCA improved the wrinkle recovery but reduced significantly the tensile and tear strength of the treated fabrics. Whereas silicone imparted a lower wrinkle recovery, a lower loss of tensile strength than BTCA, in addition improved considerably the tear strength owing to reduction in inter-fiber and/or inter-yarn frictional forces. The concentration and curing temperature needed to enhance physical properties were as follows; for BTCA treatments 6%, at 18$0^{\circ}C$, for silicone treatments 1% at 14$0^{\circ}C$. This optimum concentration of silicone was observed by using the mixture of BTCA and silicone. The wrinkle recovery and DP rating of cotton fabrics treated with mixture of 4% BTCA and 1% silicone at a curing temperature of 17$0^{\circ}C$ was similar to those of treated with 6% BTCA at a curing temperature of 18$0^{\circ}C$, and other performance properties observed were; an increase in tensile strength, extension, toughness, abrasion resistance and moisture regain due to the reduction of BTCA concentration and curing temperature, futhermore an improvement in bending and surface properties due to the lubricating effect of silicone. On the other hand 1% aqueous silicone solution showed the lowest surface tension. Such nonionic surface activity resulted in a more uniform and rapid deposition of BTCA on the fiber or fabric.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권6호
• /
• pp.639-647
• /
• 2014

지구 온난화와 화석 연료 고갈로 인해 $CO_2$ 저감과 효율 상승을 동시에 만족하는 기술 개발이 요구된다. 배기 열 회수 기술은 두 가지를 모두 만족할 수 있는 대표적인 기술이다. 본 연구는 배기 열 회수 장치를 위한 세 가지 형식의 증발기용 열교환기를 배기관에 설치하여 실험 및 분석하였다. 고속최대부하에서 판형 열교환기의 배압이 가장 높아지고 실린더 최고 압력이 낮아지며 일산화탄소 배출량도 증가하였다. 또한 고속에서 배압이 2배 이상 증가하며 연료소비율이 2% 증가되어 열교환기 중 가장 높은 증가량을 나타내었다. 핀 튜브 열교환기는 전반적으로 배기 배출물이 적게 배출되고 연료소비율도 가장 적게 나타났다. 쉘 앤 튜브는 판형과 핀 튜브 성능의 중간정도이다. 엔진에 미치는 영향으로만 판단할 때 핀 튜브 열교환기가 배기 열 회수에 가장 적합한 열교환기로 판단된다.

• Journal of Biosystems Engineering
• /
• 제42권4호
• /
• pp.283-292
• /
• 2017

Purpose: Japanese Apricot, a type of plum, has various medicinal and economical applications. Plums are quite popular worldwide, but their deseeding remains a serious impediment to their processing. Therefore, a plum (Japanese Apricot) seed remover (PSR) was developed that can use various types of cutters according to the purpose of the plum processing, and its performance was evaluated. Methods: The proposed PSR, which allows multipurpose cutters, namely, zero-, two-, and four-blade cutters, to be installed, was first designed and manufactured. To identify appropriate parameters related to the cutting pressure, plums were harvested from three regions during three harvesting periods, and their geometrical and mechanical properties were measured. After application of the parameters related to the cutting pressure, a performance test was carried out on both fresh and frozen plums by identifying the ratios of the flesh recovery, seed recovery, seed breakage, deseeding efficiency, and machine efficiency. Results: The results show that, using the proper calculation of the processing parameters, 100% deseeding efficiency was facilitated regardless of the type of cutter used. However, in the case of a four-blade cutter, there are significant differences in the flesh recovery ratio according to the plum setting angle. Between the fresh and frozen plums, all cutters showed a significantly better flesh recovery ratio for the case of fresh plums. Conclusions: This machine will advance the plum processing technology, and eventually help the plum industry flourish.

• 한국통신학회논문지
• /
• 제28권5B호
• /
• pp.369-380
• /
• 2003

CDMA 무선 환경에서는 페이딩으로 인해 에러간의 상관관계를 갖게 되어 에러들이 버스트하게 발생된다. 이러한 에러간의 상관관계는 RLP에서의 에러복구 수행능력에 영향을 주게 되는데 IS-707 RLP에서 사용되는 (1,2,3) 재전송 방법은 에러간의 상관관계가 크고 링크의 상태가 좋지 않을 경우에는 에러복구 능력이 저하된다. 이러한 문제점을 해결하기 위해 재전송을 요청하는 전체 회수는 동일하게 하면서 재전송이 시도되는 라운드를 증가시키는 방법을 적용하였다. 제안된 에러 복구 방법은 RLP에서의 재전송의 증가로 인하여 발생하는 지연이 증가하는 단점을 가지고 있기 때문에 이를 개선하는 알고리즘을 제안하였다. 개선된 알고리즘은 재전송되어 도착한 프레임의 타이머가 유지하는 정보인 재전송 라운드와 카운터를 현재 재전송을 기다리고 있는 손실된 프레임의 타이머 정보와 비교하여 이미 재전송이 실패한 프레임들을 찾아내는 기능을 수행하였다. 제안된 재전송 방법과 알고리즘을 적용하여 에러간의 상관관계가 다른 두 채널에 대해서 시뮬레이션을 통해 TCP 수율이 최대 40%, TCP 지연은 2배 정도의 성능 향상을 확인하였다.